Customer
2025-09-03 10:54:59
Super easy to setup, use, and cleanup. Did a great job with a great finish. Great price for this little machine!!!
PatG
2025-08-22 16:26:29
The media could not be loaded.
RER
2025-08-10 15:22:15
The media could not be loaded.
Woodness Goodness
2025-07-10 11:45:58
Listen, with most things in life, you get what you pay for. When I first bought this sprayer for around $80, it was worth every penny. Now that it’s dropped to $50? That blows my mind.I own a Wagner sprayer, a Graco Magnum, battery-operated sprayers, and even air compressor-powered units—yet this little sprayer has exceeded all expectations. It delivers impressive results across small and medium projects and even holds its own on larger jobs if you’re patient.No, it won’t give you a flawless, professional spray pattern like high-end models, but with a little technique—like feathering your strokes—you’ll get smooth, even coverage. For an entry-level sprayer, it punches way above its weight, replacing multiple units and quickly becoming a household favorite.If you’re looking for an affordable, reliable paint sprayer, this one is seriously hard to beat.
Todd O
2025-07-04 11:42:10
So I had a pretty big job with 12 interior, unfinished slab doors that needed to be stained and sealed. I don’t do this enough as in regularly having this volume to treat that would justify a full commercial sprayer system and this job was big enough to not having the time or inclination to hand finish with a brush, sponge, etc... I was looking for a reliable sprayer that wasn’t going to create more work and be effective and reliable since it was going to take 3 - 4 days just to spray the top coat layers on that many doors and produce a good quality, finished product.I was working out of the client’s garage that I made a temp spray booth with plastic. This sprayer worked great, was reliable and repeatable across the layers to produce a good poly top coat on the doors. The poly that is used is an important factor as well so it’s only on the sprayer. I cut the poly, water based, 10-15% in the jar prior to spraying. It took a little testing to get the pattern consistency to what I wanted and to get the speed and overlap to match the conditions. The conditions were not ideal out of the garage with it being very dry mostly and afternoon temps in the mid 90’s. I was surprised for as late in the season to still be in those temps so thinning was absolutely necessary.I wrapped the nozzle with a plastic bag between spraying sessions and rotating stock. It was about 20 - 30 min. Before it was dry enough to rotate door stock. In those temps. I would then unscrew the nozzle and tip for a quick clean just before starting to spray the next batch. Test spray into paper or cardboard or something disposable to clear and adjust product volume and then back to the doors. I can see me keeping this one sprayer for sealants only and getting another for paint. Even if it was a throwaway at the end of the job it would have been worth it for the time savings. It finished strong so I plan on using for the next job. This can make even my smaller jobs easier, quicker and more consistent so I’ll be using it more often following this experience.Do practice if you’re not familiar with spraying and if you are familiar, practice on cardboard anyway. There’s a difference between spraying topcoats or paint from water and it will give you good experience on what to look for on consistency and seeing the spray for overlap. This was a challenge in the garage.One noticing was that there was a transition on the product control volume being sprayed that “jumped†from a too small a spread to a wider spread with more product right at that sweet spot for me. I wanted the spread only with a little less product ideally for my situation and ended up adjusting my speed to compensate to maintain the size of spread I was looking for. There were places that droopped some with the sealer where there was too much build up. Thinning and temp changes were at play as well. The application was easy, the sprayer was easy to use and understand how it worked, very easy to unscrew the nozzle and clean the tip while keeping product in the jar, and screw jar back to the bottom with the feed.l when refilling. The directions were included for suggested spray tips. This one had 3 different sized tips and 2 nozzle sizes. I do recommend this homeright sprayer. I ordered a second jar with lid which is handy for cutting product and securing with the lid until ready to use. Just can make it easier if spraying lot of surface area in a pass.
Customer
2025-06-17 11:25:14
Has anybody from UK managed to use the sprayer with adapter plug? As it is at the moment it's unusable with U.S plug. Any help or advice much appreciated.
Inspironics Inc
2025-04-15 13:18:18
I usually don't write a review but I wanted to take some time out for this.We bought the gun thinking we will just do the pillars. Once we got started and actually started using the gun, we found the task to be so easy. The finish of the paint was spectacular. You have to adjust the amount of paint that comes out of it. I would put water in the reservoir and test on the sidewalk to see what kind of pressure you would want, check out a YouTube video if you need more info on this.After I bought it, I did watch a couple of videos to get in the groove of things, after a little while it was just second nature and the gun just flows really well in your hand.As you can see in the photo, I painted the majority of the front of the house with this gun. We used SW Resilience Water Based stain, we also mixed some colours together to match the landscaping, it came out beautiful.I would highly recommend this gun, no matter if your project is big or small, this gun can get the job done. It never failed on us once, you just have to make sure you don't leave the paint in the gun for a long time, just keep it flowing.We painted several weekends so we cleaned it thoroughly for the next time, this is a must, otherwise you're setting up for failure. Again highly recommend this product.
Jose Rodriguez Lopez
2025-03-23 10:13:19
La verdad la pistola cumple y muy bien, inclusive ni es necesario colar la vinÃlica, se limpia fácil, tiene mucha potencia, me gustó mucho. Solo pedirÃa que hicieran una funda plástica para cuando termines de pintar se la quites y listo como nueva de nuevo.
cristian matei
2025-03-03 17:10:00
This product comes with 110 Watt and does not work in Uk or Europe. I have bought a adaptor, but still does not work.
Andy M.
2024-11-19 17:07:02
Apenas la he usado pero se nota que es un buen producto.