Your cart is empty.
Your cart is empty.This ironing board cabinet is a smart space-saving solution. The cabinet is installed 3.5” into the wall, leaving a little more than 4 inches of cabinet sticking out from the wall. The cabinet can be installed with the cabinet door opening on the left or right, so you can install it on the side that makes the most sense for your space. The cabinet’s door exterior is a finished white that can be left as is or painted to match other cabinets in your space. Inside the cabinet is an ironing board that measures 11.75” wide and 41” long, large enough for comfortable ironing while still being small enough to not take up too much space. The ironing board can rotate a full 90 degrees to the right or left, giving you the flexibility to position the board in the most comfortable and convenient space in whatever area you install the cabinet in. The cabinet also has a built-in height adjustment slot for the board, allowing you to raise or lower the board two inches at any time after installation. The board includes a one-piece construction cover and pad with bungee cord binding and stain and scorch-resistant coating for superior durability. In addition to the ironing board, the cabinet has two interior shelves to house a small iron and/or ironing accessories. The top interior shelf has heat-resistant paneling to protect the shelf when stowing irons that are still warm. Additionally, the top corner of the cabinet door has a dual-pronged hook so you can hang up freshly ironed items or items to be ironed. Cabinet must be installed in-wall between 16-inch on center studs. Ironing board opens 11 inches above bottom of cabinet, so keep that in mind when selecting height for cabinet installation. Cabinet door extends 28.5” from wall with door open and 44.5” from wall with ironing board extended straight forward. Interior of the cabinet measures 13.25” W x 5.375” D. Shelves are shallower than full cabinet depth.
Dave
2025-09-03 14:17:13
This works well, installs in a snap. I had it in the wall within 45 minutes of delivery! Plenty of room for the iron and the spray water bottle most of us use while ironing.The directions leave a bit to be desired (they mostly all do these days, so this may help. You'll need the following tools to install this ironing board cabinet:Stud finderSheetrock sawDrill and bit setPhillips screwdriver or power screwdriver2' levelTape measurePencilVacuum cleanerI strongly suggest that you choose the location carefully as you are going to recess this into a wall. Be sure there is no electrical wires or plumbing pipes in the wall cavity you are installing this into. Also, if your interior wall that you have selected has studs on 24" centers you'll need to frame the opening down to 14 1/2" in order to mount the cabinet.The door attachment to the recessed cabinet is a little tricky to do by yourself, you may want to have someone give you a hand holding the door in place while you screw it in. Be sure to drill the holes into the cabinet BEFORE you install it into the wall or you'll struggle to get the door to hang properly.My wife loves the ironing board out of the way and easy to access. In addition, right out of the box it looks great on the wall.
K.K.
2025-08-06 15:27:44
Love this! The swivel feature is perfect and I use it all the time. It holds an iron inside, which is convenient! But I have an outlet very close, which is needed. The only thing I added was a child proof lock because if you open the door, the board could come down hard, so I highly recommend child proofing this! Great quality and just what I wanted! When installed, my laundry room was remodeled down to the studs, so we knew exactly how this would line up and had to make some adjustments.
Harpers Ferry Girl
2025-05-07 18:24:29
Bought this for our new house. The builder installed it during construction. It is just the right size and does just what I wanted it to do. Nice cabinet in excellent condition. We had an outlet installed below the cabinet for the iron. It has a metal inside corner to store the hot iron if necessary. Only problem is that the hole for the bolt that attaches the board to the swivel stand was bored from the wrong side. So they had to install the board wrong side up. (Otherwise, the bolt would protrude above the board and you wouldn't be able to skim the iron over the surface without running into the bolt.) The only downside is the edges of the board's bottom are angled rather than rounded like the top side, so it will probably wear out the cover more rapidly. But I don't use it for heavy duty ironing, just what I plan to wear that day, so not too worried.
Dan
2025-03-14 12:40:12
I feel real bad for my wife whenever i see her iron her clothes on whatever surface other than on a real ironing board, and the fact that our tiny house has limited storage for stuffs like full-size board are the reasons why i chose to purchase this unit.I was able to get a returned one with price discounted. Its flawless with not even a minor scratch on it. I just wished for the manufacturer to be more clear on how to mount the hinges on the main frame, and much stronger hinges rather than the part-plastic ones that looks like they wont last due to the weight of the door and the clothes hanged on the corner hanger.A lower profile design also should had been available. I understand the 3 inches protrusion to accommodate the storage of the electric iron itself. Many folks would rather store the iron somewhere else and have a better looking unit on their nice wall.My wife is happy. No longer she hunches over the bed to iron her dress on it, or use the kitchen counter.I'm giving it a 4-star rating.I recommend to check the wall studs clearance before installing (or even considering of purchasing it).
Virginia Burns
2025-02-10 13:49:26
So, if your laundry room consists of a full size washer an dryer, a large size iron board, iron and ironing products, ironed clothes, then this is for you! I eliminated my board, iron, products from being seen.So nice with a finished door! The only problem was getting the measurements right. It changes from standing height to a sitting position. Be sure you measure a couple of times.
Recommended Products
