Your cart is empty.
Your cart is empty.Product Description
HUANUO HNDS8 Dual Monitor stand improves the efficiency of your dual monitor workstations. By raising the 2 of monitors off the worksurface, it also supports to stacked, and customize your screen setup with an orientation that works with proper posture for working on the computer.
Customize your workspace with any screen combination. Adjustable monitor arm offers +45° to -45° tilt, 180° swivel, 360° rotation, the height and angle can be adjusted freely according to needs, making it convenient for design work and data analysis etc.
This upgraded monitor mount with a 17-inch center pole that supports raising the monitor to a higher height of up to 25.19 inches, also supports Extending your screens forward 21.6" for closer viewing. Whether you are sitting or standing, you can adjust the position freely according to your needs.
phinner
2025-08-08 10:03:10
The stand was easy to put together and mount on the desk. We did use a small block due to a lip on the back of the desk, but it is extremely sturdy. We chose a smaller desk, so this stand clears up a lot of space on it. Very happy with it.
Some Broke College Guy
2025-07-23 17:20:12
Easy to assemble, very solid, easily holds up a Dell G2725D 27" monitor. Integrated cable management is *good*, but not *perfect*; the arm channel could stand to be a bit bigger. It took some serious elbow grease to get an HDMI cable and power cable in there, along with a USB cable for a webcam.One thing to note is that if you're able to, don't follow the instructions for how to hang the monitor. Instead, it is *much* easier to simply set the monitor on the desk, maneuver the arm into place behind it, and screw in the VESA mount while it's sitting there. Then, after you've ensured the gas arm can lift the monitor securely, remove the monitor base.Still worthy of 5 stars despite the cable channel being high-effort and instructions missing out on that idea, though.
Customer
2025-07-13 18:49:40
I don't really have anything negative to say about this dual monitor arm mount. Easy setup, worked perfectly, fit my monitors, gas springs easy to adjust, simple directions, etc. But, I found that I didn't have the flexibility and movement I wanted. This is definitely in part because of my desk being in a corner, and having a hutch above my desk. I returned this and bought two single arms that gave me the flexibility I needed for my office setup.
TXtx
2025-07-07 13:08:36
This product is so amazing that it's superior than Herman Miller, Varidesk, and other inferior monitor mounts by named brands. Not only does it do a better job at hiding cords and have a place for the Allen wrenches, it has a taller height than any other serious competitor. I can place one monitor above the other.The arm extensions are better designed so you can maximize space unlike varidesk. I own a veridesk dual monitor arm and the company sucks their own dual monitor arms don't even fit the varidesks which is why I had to order a different dual monitor mount. This is such a great price for the quality and features that after testing the first one I ordered this second one from Huanuo. Also, unlike varidesk it can clamp on to thicker desks. Currently, this is best dual monitor arm mount/stand that you'll find on the market.
Mignon Cade
2025-05-28 19:02:00
Nice and sturdy! Made from good material and it was easy to install.
Mars
2025-04-25 12:12:53
Purchased this as a replacement for two monitor clamps to give my desk a cleaner look. There are dozens, if not hundreds of these mounts and they more-or-less have the same performance. I decided on the HUANO brand as it had an overwhelmingly positive amount of reviews and fit my budget.Packaging:Packaging was extremely professional, with linings to protect each assembly piece. It came with all the tools necessary to assemble the entire mount, and also came with both the C-clamp and grommet-style clamp so you could choose how to install the mount.Installation:Extremely simple. I'd recommend having an extra person help, but this can be done solo, just take your time. Instructions were fairly clear. The only issues I had were in regards to the cable management pieces. I still don't really see the value in using them but have installed them regardless. I went with the C-clamp installation, and it's extremely easy to adjust the mount to ensure you've got enough space after mounting your monitors.Note: Make sure your desk/tabletop has enough clearance to either clamp or drill a hole into. This is essential, as the last thing you want to happen is for your mount to fall and possibly cause damage to both your monitors.Mounting:This is where I had the most trouble. These mounts are for VESA-compliant monitors. I am using an LG 27UK850 and LG 27UK650 with this mount, and the 650 fits in just fine, but for some reason, the design of the mounting plate does NOT fully fit the 850. I managed to get it screwed in enough to make it work, but no matter how I angle the plate, it's not a snug and secure fit like on the 650.Power:These gas springs are STRONG. I had troubles mounting my screens by myself because the gas spring kept launching my monitors up, and I needed to leverage the table top to get the screws in. Everything is adjustable, however. Once I adjusted the tension I was able to mount my monitors.Adjustability:Just about every angle is adjustable with this dual mount. It's been a few weeks and I haven't noticed any sagging / re-adjustments so the springs seem to be very sturdy. This could change over time, but so far no issues.Conclusion:I'm very happy with my purchase and would buy it again if I had to. Word of caution: If you're mounting two 27" monitors, make sure you've got enough space for them, and measure out the total weight. Weight isn't really an issue with these monitor arms, but with these dual monitor arms, you are adding a lot of pressure at one point of your table top. I have a relatively cheap desk made of .5" thick plywood, so my biggest concern is that eventually the added pressure will be enough to break that area.
Darren B
2025-03-25 16:09:35
I have a standing desk and I’m taller than average, so monitors tend to be too low for me. Not anymore! This arm has a post that I can raise and lower the supports to the perfect height. It tilts, rotates, and lifts the monitors into the perfect position for a great ergonomic fit.Highly recommended.
eddy B.
2025-03-14 15:13:18
Pratique, solide, universel et réglable.Très content
Stella
2025-02-25 15:29:21
I recently got this dual monitor stand, and it's been great for my setup. It's sturdy and holds my two screens perfectly. The adjustable arms make it easy to find the right angle and height, which helps with comfort during long work hours. Setting it up was straightforward, and it feels solid once in place. My only small gripe is that the arms are a bit stiff to move at first, but they loosen up with use. Overall, it's a reliable stand that keeps my desk organized and my monitors secure.
lemonnier arnaud
2025-01-15 18:53:33
robuste et simple de montage!
Alexander
2025-01-10 15:56:02
Sehr stabil mit 2x 32 Zoll und einfach aufzubauen!
Recommended Products