Your cart is empty.
Your cart is empty.Product Description
Our products are always inspected and commissioned before send out, but due to the transit, they may be scratched or parts may be deformed.
In such cases, the damaged part can be replaced. Thank you for your understanding in advance.
**Please note that it is better not to cut with gloves to avoid hand injury due to inflexible operation.
All drill chucks included with the current stock products are 0.6-6mm. If you want to change the size of 1.5-10mm, please let us know before place an order.
**Please note that it is better not to cut with gloves to avoid hand injury due to inflexible operation.
Failure elimination
If you get stuck during the work, please check it easily by the following method.
Make sure that the green lamp of the power supply stays on for a long time while the power is on. If it does not light or blinks, there is a problem with the power supply. If the machine is continuously used for a long time, the power cord will get hot. Normally, it is recommended to use for 30 to 40 mins and then stop for about 15 mins to cool.
Turn off the power and try rotating the motor shaft (the part that connects to the drill chuck) by hand. If you cannot rotate with your hands, the motor is defective. If the motor shaft can rotate without any problem, it is considered that the connection is poor due to wood chips mixed in the switch part.
(For above situations, please feel free to ask us for help.)
Installation of drill chuck
The specific steps of installing the drill chuck are shown in the figure above. When installing, please make sure that the drill chuck is firmly fixed.
Replace the saw blade
If you find that the saw blade keeps falling during use, it may be that the aluminum block in the device has slipped and needs to be replaced. We can provide free aluminum block accessories and videos on how to replace them for you to replace.
Adjust the lifting of the saw blade
The rotation direction of the saw blade and how to move it up and down are as shown in the figure above. When installing the saw blade, please pay attention to the direction of the saw blade, and do not install it upside down.
Mike
2025-09-05 10:18:43
Accuracy will be fine for our dollhouse project, mechanically sound. I would have liked the plastic guard to be more transparent to see better and the miter guide has a little play that I compensate for. Overall a very nice saw that I recommend. The customer service has been very responsive by following up on delivery and making sure I was happy with my purchase.
Patrick Adamson
2025-08-15 17:23:59
I suppose if your only cutting 1/8 inch balsa wood it’s fine. Don’t try to cut anything bigger won’t do it
Mikey
2025-08-04 17:45:48
This little saw is very good for small cuts on things all the way up to about 1/4" thick. Past that, it has trouble cutting. One thing that does go bad pretty quick is the switch that comes with the saw. The company probably knows this issue because the saw comes with an extra rocker switch that is easy to change out. The problem is that the new replaced switch goes out pretty quick and now you are left with chasing a replacement down on Amazon. I've found them for about 12 dollars for 2 and they work ok. So if you are cutting wood or paper less than a quarter inch, this little saw will do what you need. If you need something that will cut thicker material, I'd recommend a little bigger saw.
MountainMike
2025-06-07 14:56:31
Cutting 3/8 inch walnut. Keeps bogging down. Have to feed wood VERY slowly. For thinner materials would probably work well . Very pretty though. Plan on making one using a miniature circular saw.
JP
2025-05-25 14:29:50
Works very well, clean cuts, easy to use. Could be great if the working cut area could be bigger.
JH
2025-04-11 16:34:09
This table saw seems to be well built. I just received it so have not had a chance to use it very much, but from the few cuts that I have made so far, it cuts well and seems to be accurate. After I use it more, I may want to update my review, but as far as I can tell, it is durable and seems accurate. Very good for crafters who want to make small objects and need to cut small pieces of wood.
Jon
2025-03-03 11:45:57
I knew it was a small saw but I didn’t expect it to be quite so weak. It struggles through even thin pieces of soft wood. I’m going to try and replace the motor with something more powerful. The rip fence is poorly designed and hard to align. They should have put the markings on the edges and had some mechanism to keep it parallel to the blade.
Corrales58
2025-02-23 16:41:07
I have ordered and returned 2 saws that didn’t meet our specific needs. As they say, 3’s a charm. My husband could not be happier. He loves it! Use currently for small birdhouses and miniature houses - I will use to add the furniture to my dollhouses.
Moe T
2025-02-20 14:34:40
Love this saw, it's perfect for my hobby of model ship building. Good blade and very accurate cuts. The chuck is a bit small for sanding down the larger masts, but easy to work around. Only issue is the confusion around variable speed which is noted in the description. I assume the terminals on the power box can be used for this purpose, but I have not been able to find any instructions on which to use and I'm not prepared to go to trial and error. The product technical details only lists one speed (9000 rpm).
Customer
2024-12-05 17:30:22
Awesome at what I need it to do, to cut smaller pieces accurately and with precision. It has what I need to make consistent cuts so far, I plan to make small jigs for my work. Great for making intricate and straight cuts for pen blank making!
Recommended Products
$639.00
$ 99 .00 $99.00