Your cart is empty.
Your cart is empty.Product Description
PNTGREEN Hvlp Spray Gun - H827
Easily achieve a completely even and consistent coating
PNTGREEN professional paint spray gun will be your best helper for spraying. The 600cc gravity feed paint gun is suitable for painting cars, walls, tables, doors, and industrial equipment.
1.4 mm stainless steel nozzle
Brass cap for durability and 15 holes for better atomisation.
Metal knob
Spray at your fingertips with the simple turn of a button
Spray gun trigger
Ergonomically shaped to ensure easy and precise control
Air Pressure Valve
Turning on or off the air supply.
Shawneliason
August 27, 2025
I wanted to just buy two or three cheapo guns to spray enamel and maybe some automotive. This gun is amazing at its price point. The design may be all too familiar with every other cheap gun out there... but the quality of this one is hands down the best I have ever seen in this price range.. and it comes with 2 cups 2 tips and 2 needles! 1 set for 1.4 and one set for 1.8. the needle pulls straight centered in the tip unlike poorly built paint guns.. making for a great pattern that is wide and uniform. the overspray wasnt bad at all.. much less than my harb frei purple guns.. and I love my purple gun with the gold knobs, its great> but this PNTGREEN is my new favorite! It cleans up well, i can be taken apart easily. its mostly all metal to metal gaskets in the nozzle end and all solvent resistant gaskets on the needle& air valves. the cup is well made and the lid fits snug without leaking. I basically took it out and ran solvent through it, made sure the seals were snug ,filled the cup with acetone and left it overnight.. It held up perfectly.. I broke it down and cleaned it once more, put on a high flow fitting , tossed the cup filter, and sprayed 3 pots of rustoleum aluminum thinned at 20% with acetone/zylene to give a galvanized look. shot a beautiful pattern and did a great job of putting the paint down evenly. its very important to have an even coat with this type of paint because it gets a pattern as it dries. Overall great gun! I actually came to buy another but theyre current unavailable. so i left a review instead.Well.. I still love this gun but they've almost doubled the price since I left this review.
mark patel
July 26, 2025
Having spent many years laboriously painting with a brush, I decided to try using a spray gun. This gun seemed like a good quality unit at a very reasonable price, and I was not disappointed.Before diving into spraying, take the time to learn about proper use and setup (there are several good tutorials and videos on the web). Understanding what all those knobs do and how they affect the spray pattern is really important (and unfortunately the instructions that come with the gun are of little help). Also, get some mixing cups (important for thinning paint) and some paint strainers.My first use of the gun was to repaint some vanity cabinet doors. Using a gun is so much easier than brushing when you have raised panels and edge details to paint! I sprayed BM Advance paint (thinned with about 15% water) and was able to get an amazingly smooth and even finish with the gun adjusted correctly (test spray some scrap pieces first to get everything dialed in first).Cleanup is definitely the downside of using a gun. You will need to remove the cap and nozzle with the provided tool, and use the little brush to clean out the paint chamber. Once everything is clean, used compressed air to blast out any lingering water and leave the gun disassembled to dry. It's a bit of work, but provided you have enough painting to do, the net gain over using a brush is well worth it (and thorough cleaning is the key to keeping the gun working well).
Nevada Geezer
July 20, 2025
Decent price, works well, easy to use and easy to clean.
Dean Birdington
June 22, 2025
Very impressive for the price you pay! I paint professionally and needed an inexpensive backup just in case! I started using this at home for some small projects and wow I'm super impressed! It sprays consistent and easy to clean, very strong and sturdy, no issues with any of the parts!Very good product!
Bryan Moore
June 18, 2025
I love this spray gun . I have a few and this one sprays so well, it lays down a very smooth and deliberate layer of paint. Amazing totally for the prise. The fit and feel of it is very very high quality also the adjustments are so natural and esay to dial in , no matter what task you need this gun to do. So much better than the rest ,I have lots of spray guns. I use all the time. I paint mostly motorcycle tanks. ,fenders and fairings stuff like that daily. PTN Green has made one of the best spray guns money can buy ! At any price. Thanks PTN Green.
Clayton
June 5, 2025
My first ever Amazon review after thousands of purchases. I’m spraying some high bild lacquer with this gun finishing some knotty alder. This gun is great for the money and although I was apprehensive of the lacquer in the plastic cup I have had zero issues. A+
Nicholas H
May 17, 2025
I used to paint show cars and have several HVLP guns in the $300+ range but none with a 1.8mm tip which I needed for spraying Cabinet Coat, so I bought this. For under $40, it's a steal if it works for you. Unfortunately the spray pattern I'm seeing is not smooth and it's spitting heavily. Reducing the fan width improves it slightly, increasing the air volume to the max setting also helps, but the only way to get rid of it is by bringing my air pressure up to about 70psi with the trigger pulled which is WAY over the recommended rating of 20psi for this material. With that much air pressure I'm still getting a finish that is not much better than a roller and requires sanding and refinishing with another gun. When switching to my 1.5mm high-end gun, the finish is smooth like butter but I can't get the volume I need with that tip painting cabinets and I have to thin the material a touch beyond the specs. I'm meticulous with cleaning my guns and have taken this apart to see what's wrong with it but nothing is standing out. Seems well built and the trigger operates smoothly but the spitting is just beyond anything I've ever seen in any HVLP gun. Thankfully Cabinet Coat is forgiving as it flattens very well such that your average Joe won't notice the "rolled" finish... but as a former car painter, I might as well have picked up my roller and saved a lot of time and hassle on my last job. I'd have given this 1 star if not for the price. You get what you pay for and for the money paid, I should not complain.
Brian
April 7, 2025
First time user of air compressor paint spray gun. Easy to set up. We tested with water first. Diluted the paint by about 10% (used Sherwin Williams Emerald Urethane). Spray was uniform. No runs or drips. Easy to clean. Just be sure to clean it soon after finishing.
Apolonio Garcia de León
March 27, 2025
Llegó muy rápido y en buenas condiciones
OK P.
January 24, 2025
After few weeks the tread gone. We can't open for cleaning because the thread in aluminium body is week and become useless
Lecia bratt
January 10, 2025
Great product and they really feel they want you to have a great experience.. Highly recomend
Jagjeet Singh
January 2, 2025
I ordered for 1.4mm tip Gun but received 1.7mm Tip and Didn't Get my Spray Gun Key Chain...
Mark S.
December 10, 2024
Missing parts. Paint gun is advertised to include 2 different sized spray nozzles. Only 1 nozzle came with gun. Service tools for the gun were also advertised but not included with the gun. I returned this product for a refund.
Recommended Products