Your cart is empty.
Your cart is empty.Product Description
Dent Puller Kit Features
Car Dent Puller Kit Features
The Most Economical Dent Remover Tool For Car
1.Easily repair dents on the surface of the car, bid farewell to expensive repair costs!
2.This suction cup dent puller is good at repair car dents, mobile phones, glass, marble, tiles, mirrors, especially for lifting, Move, pull, grab, and carry smooth plates.
How to Use ?
1.Adjust the handle to the separate state.
2.Place the suction cup on the surface of the item.
3.Press the suction cup vertically downwards, and then make use of suction cup handle(to lift the item).
Car Dent Repair
Step 1. Clean the surfaces and dent puller that need to be repaired.
Step 2. Pour boiling hot water evenly on the surface to be repaired.
Step 3. Align the tool with the surface to be repaired and press the pressure handle.
Step 4. Pull out the dent puller and restore as before.
Note: Before use, please make sure that the dent is clean, non-porous, and dry, and the repaired surface needs to be larger than the diameter of the suction cup.
Warm Reminder
1.When dealing with car dent, only for the flat surface, not for the curved surface.
2.Please make sure that the dent are in the flat surface and should be larger than the bottom suction cup diameter.
3.Always try to make sure there is good suction before lifting.
4.The product does not work on wooden surfaces.
5.Must be used on clean, smooth, flat, non-porous, dry surfaces.
6.Please store the suction cup in clean, dry condition.
A new combination of strong suction car dent remover, you can use suction to pop the car body back into position.
2 different sizes, colors, and suction power of the car dent puller kit.
The maximum suction power reaches 165 lb and the small one reaches 121 lb, Different size of the dent puller can take care different areas of car dent.
- - 1 x Big Car Dent Puller
- - 2 x Small suction cup
Born2Shop
2025-08-26 17:33:35
These are always a bit tough to review. This is my third set and there is definitely an art to pulling dents from cars. You start on the outside of the dent and work your way in going in circles. You're not going to get it perfect with these pullers alone, but can certainly make it look better.The problem is always having enough of a flat surface to allow the suction cups to adhere. This kit comes with two smaller units, which is super helpful. They are actually quite powerful and the handle action works well. I do wish that there was a mid-sized item that came with this instead of the larger one, but that might just be because of the nature of the dents I'm working with.Overall, good value for the money and if you are patient, you'll be able to pull much of the damage out with the smaller dent pullers.
Colin Vesper
2025-08-12 12:49:14
I had been really wanting to try these ever since a huge dent suddenly showed up on my car. They're really easy to use and clamp on really nicely! If you have a dent, these are 100% worth a shot.I didn't have a big enough dent to use the big one, but the small ones worked perfectly. They easily clamped on and you can really pull on them good!While I couldn't fully get the dent out, it looks waaay better. I can't fault the suctions for not fully getting it out, the metal is just too sharply popped. I did try the boiling water trick as well as leaving the suction clamped over night, but it still wouldn't fully re-shape. I will probably give it another shot when the weather is hot again. Again though, still way better than it used to be!
Andy W.
2025-05-24 18:01:08
I ordered this to try to remove a dent from the edge of my car. I thought there was a good chance I wouldn't be able to use it, because the dent is not completely in a flat surface. I was right. Even the small dent puller is too large for this dent's peculiar location. I would have to have a much smaller dent puller to have a chance at pulling this dent. As for this product, it actually seems quite good. Included is a large orange dent puller and two smaller black ones. The black ones are the same--not two different smaller sizes. You simply press the handles together to create the seal, and then pull. I did try these on a flat surface, and the seal seems quite strong. I expect they would work well to pull dents, as long as the area that includes the dent is large enough to allow for a good seal.
Pariprincess143
2025-05-16 09:44:56
I used this dent puller on a small dent on my car door, and it worked reasonably well. The dent looks much better now. I even tried it on a ding in my fridge, and it did a good job! The suction cup attached securely to the surface, but I had to clean the area thoroughly first to ensure a tight seal. It required a bit of strength to pull the dent out, but it was manageable. The suction is surprisingly strong when applied to smooth, non-porous surfaces. The handle felt sturdy and didn’t slip during use, which gave me confidence while applying pressure. This tool seems best for shallow dents and may not be enough for more serious damage. Keep in mind that it might require multiple attempts and, in some cases, using two pullers at once. So far, it has worked well for me. Overall, for basic dent repairs or lifting glass, tiles, and other smooth objects, it’s a helpful tool to have on hand.
T. Bonini
2025-03-14 12:00:46
I used these on my buddy's F350 that was hit on the side near the rear wheel well. The dent looked pretty bad and I was not sure if they could do anything with it. The smaller cups did not have enough force and at first, the larger one would not grab on due to the distortion in the metal. With some real force, we were able to get it to grip and to my surprise, on the second attempt was able to pull the major part of the dent out. It was not a perfect repair as the metal was stretched a bit and creased in one area but it looks 100% better than it did prior to the attempt. If the metal was just pushed in or not creased, it probably would have fully pulled the dent out. The kit does work well but you really need to be realistic on expectations. The panel will still need some work with dolly's and body hammers but at least now, it is about 90% there and much better looking so it can wait for warmer weather.
shopper8424
2025-03-04 18:30:20
I love that I can remove minor dents on my own versus having to bring it into the shop. It is only for using on certain areas of the car, as shown on the box and the advertisement. There is a small but sufficient Instruction manual included. This tool is has an incredible suction. I can imagine that it can be used to carry glass and stuff too. Or to pull the screen off of a cell phone. The advertisement shows how it can be used for many more things, not just dent removal. Super handy! We love it!
ERIC NESBITT
2024-11-26 13:25:44
Good Review:The HYWMLY Dent Puller is an incredibly effective tool for removing dents from my car! The 3-pack kit provides multiple sizes and options for various types of dents, making it versatile for different repairs. The powerful suction easily lifts and removes dents without damaging the paint, and the ergonomic design makes it easy to use. It also works well for lifting glass, screens, and tiles, adding to its versatility around the house. The high-quality construction ensures it’s durable and reliable for repeated use. This dent puller has saved me time and money on professional repairs, and I highly recommend it!Bad Review:While the HYWMLY Dent Puller does work to some extent, it doesn’t perform as well as I hoped. The suction power isn't as strong as advertised, especially for larger dents, and it often requires a lot of effort to get a decent result. The rubber pads don't always create a secure enough grip, and I found myself struggling to get a good seal on certain surfaces. Additionally, the tool is somewhat bulky, making it difficult to maneuver in tighter spaces. For smaller dents, it might be useful, but it didn't quite meet my expectations for larger or more stubborn dents.
Recommended Products