Your cart is empty.
Your cart is empty.Product Description
a new type of valve which is self-developed.The speed of gas filling is much faster, the air intake is easier, and it also has a greater capacity of pressure bearing.
This gasbag is made from special material, which adopts double-layer TPU composite high-strength fiber.It has a sandwich structure with a material thickness of about 0.8mm. The gasbag is pressed by the fusing process, which has better air tightness and pressure resistance.
Sturdy latex Hand Pump
King Kong
2025-09-04 10:37:55
I purchased this for a few tasks.1) Lift my washer and dryer so I can get stuck items.2) Put a tight gap for my book shelf during assembly.To my surprise, they work great. I was able to get my tasks and they are easy to store.
Kirk J.
2025-08-27 17:43:43
Have a built in fridge that has been out of level since day installed. Was able to slide a few of these under from front and adjust leveling feet finally!Great thing to have, and worth price from just the first use.Highly Recommend!
C. M. Chapman
2025-08-13 18:43:48
Works. Doesn’t have a large range but did an adequate job lifting a refrigerator that was full.
kennyk
2025-08-04 16:03:53
Bag material (kinda stiff and a bit slippery) is not as nice as others I’ve had in hand but for the $ these get it done. Time will tell if they hold up. Used a pair them to lift the edge of a fridge so I could put sliders under - worked great. Release valve can be a little finneky but not a problem for general use. Also used them to reinstall interior doors for hinge alignment….puffed em up with my feet, again no issues.
Customer
2025-07-18 10:04:47
I use this to tighten foam pieces in my RV under the slide out when it is pulled in so that it is stable.
Hotdog
2025-07-11 12:16:12
Love that it comes with 2 inflatorsUsed both to level a heavy refrigerator yes it will lift any appliance
Allen
2025-07-09 16:47:01
It works.
Lucio Cantu
2025-06-30 11:38:41
Easy to use. I bought it to replace my older one and it worked perfectly. Recommended
Rich
2025-06-21 12:32:19
These are a great help when installing doors.I had 10 doors to remove, paint and replace and these Air Wedges allowed me to do the installation without help from someone else.I could level each end to get the doors aligned perfectly, and then screw them into place.I also had a washing machine and fridge that was not level on the floor, and these were very helpful in lifting up the front of the appliances so I could turn the feet to adjust to the right height. They hold up an incredible amount of weight, and I love the quick release button.I highly recommend these, especially given buying a single unit in the hardware store can be double the price of what you pay here.
Barry Dwernychuk
2025-06-20 18:36:13
It did the job, lifting our stacked washer/dryer about 1.2†to get a baking (drain) pan under it. Maybe 200 lbs total, pretty much the limit of my hand strength to pump the bulb to get that lift. But it’s a shim, not a jack and does allow very fine adjustments up and down. Probably need to use foot pressure or make a simple hinged “nutcracker†to squeeze enough to lift more weight or to max lift of 3â€. Seems well made. Great addition to my tool collection!
Andy Weir
2025-06-13 15:58:30
Worked great lifting a fully loaded upright freezer so I could replace the fan motor.
Hamada
2025-06-05 13:19:16
Highly recommended
Frank
2025-05-30 16:19:14
Worked for a while, and then on my 4th job with them the valve broke. Now one of these just lets out air and does not maintain pressure making it useless.
King Kong
2025-05-20 13:55:45
I purchased this for a few tasks.1) Lift my washer and dryer so I can get stuck items.2) Put a tight gap for my book shelf during assembly.To my surprise, they work great. I was able to get my tasks and they are easy to store.
Kirk J.
2025-05-18 16:51:15
Have a built in fridge that has been out of level since day installed. Was able to slide a few of these under from front and adjust leveling feet finally!Great thing to have, and worth price from just the first use.Highly Recommend!
C. M. Chapman
2025-05-14 13:11:00
Works. Doesn’t have a large range but did an adequate job lifting a refrigerator that was full.
kennyk
2025-05-08 16:39:43
Bag material (kinda stiff and a bit slippery) is not as nice as others I’ve had in hand but for the $ these get it done. Time will tell if they hold up. Used a pair them to lift the edge of a fridge so I could put sliders under - worked great. Release valve can be a little finneky but not a problem for general use. Also used them to reinstall interior doors for hinge alignment….puffed em up with my feet, again no issues.
Customer
2025-04-21 13:31:34
I use this to tighten foam pieces in my RV under the slide out when it is pulled in so that it is stable.
Hotdog
2025-03-19 13:46:07
Love that it comes with 2 inflatorsUsed both to level a heavy refrigerator yes it will lift any appliance
Allen
2025-02-28 16:48:55
It works.
Lucio Cantu
2025-02-14 17:09:07
Easy to use. I bought it to replace my older one and it worked perfectly. Recommended
Rich
2025-02-07 10:59:09
These are a great help when installing doors.I had 10 doors to remove, paint and replace and these Air Wedges allowed me to do the installation without help from someone else.I could level each end to get the doors aligned perfectly, and then screw them into place.I also had a washing machine and fridge that was not level on the floor, and these were very helpful in lifting up the front of the appliances so I could turn the feet to adjust to the right height. They hold up an incredible amount of weight, and I love the quick release button.I highly recommend these, especially given buying a single unit in the hardware store can be double the price of what you pay here.
Barry Dwernychuk
2025-01-27 15:25:59
It did the job, lifting our stacked washer/dryer about 1.2†to get a baking (drain) pan under it. Maybe 200 lbs total, pretty much the limit of my hand strength to pump the bulb to get that lift. But it’s a shim, not a jack and does allow very fine adjustments up and down. Probably need to use foot pressure or make a simple hinged “nutcracker†to squeeze enough to lift more weight or to max lift of 3â€. Seems well made. Great addition to my tool collection!
Andy Weir
2024-12-29 10:49:06
Worked great lifting a fully loaded upright freezer so I could replace the fan motor.
Hamada
2024-12-18 15:53:48
Highly recommended
Frank
2024-12-08 10:27:23
Worked for a while, and then on my 4th job with them the valve broke. Now one of these just lets out air and does not maintain pressure making it useless.
Recommended Products