Your cart is empty.
Your cart is empty.Taylon Parr
2025-08-01 18:21:22
These brass steering knuckles are a great upgrade. I have an Axial Base Camp and these installed very easily. The bearings fit into them perfectly and the mounting screws worked great.
Shary
2025-07-28 18:24:39
The fit right on.
Todd S
2025-07-23 10:56:33
Perfect for keeping the front end down while crawling. Very easy to install.
David M Hubbard
2025-07-12 18:34:32
Added weight up front where needed.Would highly recommend for $10 dollar upgrade!!!!
Anthony
2025-06-22 12:42:54
Fit fantastic!! Got zero complaints at all dosnt weigh to much but bettert then nothing
JayCrash450
2025-05-27 09:04:02
I don’t know what those other manufacturers are doing but injora does it right for the price and quality. These knuckles are every bit as good as any others and is priced right, like many of injora things btw.Don’t forget a little loctite for the knuckle screws. I haven’t had a problem but I started with loctite from the beginning.
L. Hartmeyer
2025-04-23 14:03:35
I've bought other brass steering knuckles and had problems with the threads, but these installed with zero issues. The clearances for the bearings was great and they went right in. I will definitely be buying any others from injora in the future.
Thomas Cox III
2025-04-16 15:21:48
Ordered another set that was non-injora that came with the right hardware. The injora one did not come with the right hardware as pictured. I just ordered another set instead of going thru the hassle of returning
John
2025-03-17 17:20:48
Great knuckles for the SCX24, git great
Bianca S.
2025-02-15 12:15:18
So wie fast immer sind INJORA-teile echt top. so auch diese.Passt auch auf den alu achsen von injora.
Zach
2025-02-11 13:52:56
no issues, easy install, all parts included. didn’t use included pivot balls because i didn’t want to pop the old ones out. works good. nice weight
Chris Jurgenliemk
2025-01-18 11:29:41
I bought these for my Axial SCX24 Deadbolt to lower the CoG of the vehicle. They worked great! They are well built, easy to install, come with new hardware, and even have little brass bushings to aid with the steering friction.My only two things that I would improve:1. The bearings fit easily into their spots, but they weren't tight enough to stay in on their own. They don't need to be press fit, but a slightly tighter tolerance would aid assembly.2. There is still more friction in the steering assembly than the stock set up. I am not upgrading my servo and steering linkages to account for this.
Owen
2024-12-31 14:36:34
Easy install
Recommended Products
