Your cart is empty.
Your cart is empty. Specification:
Model: T128010SU
Voltage: DC 12V
Current: 0.35AMP
Fan Dimension (L x W x H): approx. 75mm x 75mm x 10mm
Mounting holes distance: approx. 40mm x 40mm x 40mm (Center to Center)
Power Connector: 4-Pin Header
Application:
DIY fan For zotac gtx 970 dual Fan
Raymond Chiu
2025-08-17 15:11:06
Fit perfectly in my Zotac GTX970 whose fans died after a lot of usage.Easy to install. Now fully operating gpu
D. H.
2025-07-30 16:57:26
The main thing that's different is the wires on these are longer, which gives you more leeway to work with but also means you have to figure out how to tuck or otherwise move them out of the way of the fans. These worked perfectly to replace the fans on my 970 after it started making grinding noises, and with replacement cards going for what they are I was really hoping they'd fix it- and they did! Note: You should definitely have a set of small screwdrivers to open up the card casing and remove the fans.
r v
2025-07-23 16:26:24
These fit as expected and are quiet. They are very easy to install.
Customer
2025-07-09 10:13:16
Fans on the Zotac 970 fail frequently. This fan works, fits well, and not too noisy. Price is fair, could order them from China for cheaper but who want's to deal with that. Thanks for the fast fix.
John
2025-06-21 17:00:56
This fan's connector doesn't fit my graphics card, so I just soldered two of the wires together. The consequence is that it's always running at full speed. Never had any issue with noise, but I have a pretty quiet computer tower. I only needed to use one fan. It has finally started failing after 450 days since I installed it. I installed the other fan today (2024-10-26). Hopefully it lasts longer than the first one. For the price, I can't really complain.
Joñes
2025-06-20 09:43:40
This is the easiest solution for replacing fans on - you guessed it - a Zotac 970. Pro tip, if you to fix it while you wait, you might have luck if you pry the fan housing off the spindle, shoot a cleaning chemical into the spinny bits such as brake cleaner, carb cleaner, electrical contact cleaner, or mass air flow sensor cleaner, then relube with grease and reassemble. In my experience that's never a permanent fix, but the good news is that these fans are an exact fit with the exception of looping and tucking the excessively long wires. The only other alternative to these fans is to grab yourself dual 92mm fans with a fan splitter and zip tie the contraption to the heatsink and forgo the shroud. But by the time you buy the fans and the power splitter, they cost more than these replacements. In 2021 with GPU shortages, it's important to hold on to what we have. GTX 970 gaming in 2021 is back, baby!
Carnel
2025-06-09 12:28:00
Cable was a bit longer than the stock 970 fan but it worked once I found a way to tuck it under my card's shroud. Now my GTX 970's dead fan is replaced and the card works as good as new.
Xavier Elliott
2025-05-28 18:53:11
The stock fan are loud & will wear out quickly. These fans fit well with the Zotac GTX 970 & they are quiet. The cable is a bit longer than the original which is good & is not problem to tuck away easily. If you have one these graphic card I recommend you buy these replacement fans & store for when the original fans fail.
Peter
2025-05-01 14:23:32
Perfect fants for the Zotac 970 GPU fit like a glove and saved me having to get a new card!!And there are two in the box!! (Title and quantity hint it's one, but a single order gets two fans!)Cable for fan was a tad long but was able to still fit inside the fan housing
LINKKKKe
2025-04-15 17:42:39
Nice but didn't fit my gpu (my mistake)
Client d'
2025-04-11 18:49:49
Superbe, livraison en 10 jours en IDF le 30 decembre 2020. Merci au fournisseur en Chine. Une carte graphique ça coute cher, alors qu'on peut remplacer les ventilateurs introuvable en France. J'avais suivi la manip du foret pour lubrifier un ventilo, ça a fonctionné mais j'ai du le regraisser régulièrement, le 2 eme ventilo l'axe semblait s'être abimé avec le temps sans manip du foret.J'ai donc opté pour le remplacement des ventilos. Effectivement les câbles sont plus long, j'ai remarqué que les couleurs de fils était opposés en comparaison avec ceux d'origine, donc qu'il fallait leur faire un demi tour avant le branchement et par ce fait le haut du bornier male du ventilo se connecterai comme ceux d'origine. Est ce voulu ? (petite frayeur quand même lors de la vrille des fils et du branchement je me suit dit que si casse dans le bornier c'est foutu). Pour le démontage des ventilos et du carter j'ai utilisé un crucifix PH1 de 3.8mm et non pas le petit tournevis, c'est surtout sur le carter que les vis sont très serrer et que le PH1 semble convenir. Pour le bornier utiliser un petit tournevis plat pour faire sortir le mâle de femelle.Petite frayeur lors du démarrage de l'ordi ventilos qui tournent mais écran noir. J'ai démonté ma carte. vérifier quelques branchements et puis ca a redémarré mais en passant par le mode sans echec.Conclusion, allez y! Ca ma sauvé la vie, mon ordi est mon outil de travail, deplus pénurie de carte graphique en décembre, je ne suis pas certain d'avoir les compétences pour changer une carte. Envoyer mon PC en réparation m'aurait couté très cher. Dernière info si mes ventilos ont claqué je pense que c'est SC2 (8 joueurs), j'y joue parfois le soir et la carte graphique chauffe méchamment, j'imagine que les ventilos tourne très fort. Je pense que je vais me racheter une paire de ventilos de rechange.Merci au fournisseur! Et à Amazon!
Cliente
2025-03-07 13:15:59
Montate facilmente. Ottime
Falk
2025-02-20 19:59:44
Die Lüfter arbeiten, leider waren die Bohrungen nicht ganz passend.
Recommended Products
