Your cart is empty.
Your cart is empty.Adam
2025-07-28 16:20:33
Works great for pulling the converter bolts out of hard to see areas. Haveing both hands free insteed of holding a mirror in the other. Flexible with a strong magnetic force.
Steve Christiano
2025-07-06 16:05:50
I already purchased a shot mirror for my Gaggia Espresso machine but it was bigger and in the way , there is only so much space on the drip tray . Unfortunately it is designed to be used that way , but I needed to be able to fit my scale there to . When I saw this I wasn’t sure if it was going to work but as to can see it’s perfect , it up and out of the way and I don’t have to lose space on the drip tray 😊The quality is great , everything is metal and the magnetic 🧲 end is extremely strong and holds the mirror exactly where I positioned it ‼ï¸â€¼ï¸â€¼ï¸
Bluebird
2025-07-02 14:33:26
It is very small.
MCH
2025-06-07 17:31:17
The magnet is quite weak and wouldn't hold to anything to use as a shot mirror. The reflective surface was also very poor and not close to a crystal clear mirror. The joints didn't hold either, so it couldn't be stood up in any articulated fashion. One of the worst products I have ever gotten from Amazon. Perhaps it makes more sense for welding, but not for espresso.
Dan Lyons
2025-06-01 13:34:06
The design leaves a lot to be desired. Sharp edges and low strength magnet. It does work, but don't expect it to be stable.
Gabriel
2025-05-24 10:47:14
I got this mirror to help with using indiactors on hard to reach areas. I have to drive a cnc machine with 2 hands and hold a mirror to make sure I don't drive off the machine surface. This mirror is perfect. The magnet is strong. The mirror flexs just as I need it to and then it holds its position where I leave it. Great purchase.
D. Teetzel
2025-05-21 11:15:07
Product came apart at some point before arriving. Had to reassemble. Recommend better packaging.
JL
2025-05-07 10:29:20
I do a lot of exhaust work and this helps me greatly in not having to drop the exhaust to weld the tops where I can't see. Stick the magnet somewhere out of the way, position it where I can see and get to work. Would definitely buy again!
Joe Consumer
2025-03-16 17:47:55
Not much else to say. Party on Jeff.
D. Porritt
2025-02-05 18:22:28
The magnet is not strong enough to support the weight of the mirror at certain angles on most if not all metallic surfaces. If you intend to mount it on the side of something as opposed to the top then gravity will tilt the mirror downward. Not worth the aggravation.
Recommended Products
$40.00
$ 17 .99 $17.99