Your cart is empty.
Your cart is empty.Product Description
Mikki
August 29, 2025
Came packaged very well. Directions were easy to follow and the product is simple to use. The thinner bands are more difficult to get even, and I’m sure with time. I will get better as I resize some of my rings during the process of weight loss for both my husband and me. Definitely better than a little wraps that you get to go around them and a lot cheaper than getting them resized every time you lose weight. Only time will tell how long it lasts, but even if you have to redo them, it’s still less expensive than taking them to a jeweler.Once the glue is set, it’s very soft and very comfortable. You don’t even know you’re wearing it. It fits just like a natural ring.
Customer
July 10, 2025
I was not sure about this product. It does work. It was easy to use. Directions were easy as well. I recommend this product.
Madyson Fletcher
July 3, 2025
This product arrived faster than expected in a cute box containing directions, a small UV light with a cable, UV curing resin, and a ring holder. As a perfectionist I was very concerned about how the resin would apply since one of the rings I was working with is very thin and I did not want the resin to run off the band and around the ring design, the other ring I used had openings in the design and I did not want the resin to drip out. The resin itself is more of a viscous gel than a liquid and application was rather smooth. The gel remained in place long enough to cure and did not run around the sides of the band. The ring holder was not incredibly secure (this did not ruin the process), the ring made the holder tip and the rubber did not apply sufficient pressure so the ring shifted downwards. To counter this I held the ring so as to not smudge the resin until cured enough to place in the holder and when using the holder I did place a pencil on the clear plastic so it would not tip over. I would recommend having something like a toothpick on hand to spread the resin as needed and to attempt to smooth out any bubbles if you feel comfortable doing so. I have never worked with resin or UV resin as this was a first and it was simple enough. I have not attempted removing the resin as it was not necessary during my application process, I did multiple applications to reach the desired sizing. As to the feel of the resin post cure, it is hard and not tacky. In wearing the ring, you can feel the resin, though it is not distinguishable from the material of the ring itself when wearing. I will be monitoring to see how the resin holds up over time and edit my review if possible to speak on its longevity. I’m my opinion, this is worth the money and there is enough resin for multiple applications. I applied this to two rings with multiple applications on each (up to about 5) since I was only applying a small amount at a time and then testing the sizing (I wanted to be sure it would not fall off when washing my hands). Hope this helps, happy resizing!
Mollyann
June 4, 2025
I had my engagement ring professionally sized down by a jeweler, but still had the issue of the diamond falling side to side CONSTANTLY on my finger and it drove me absolutely crazy. The ring is sized properly, does not fall off or pull easily off of my finger but still, I needed a way to fix this without putting one of those tacky clear spiral gap fillers on the ring. I purchased this in the hopes it would help somewhat and holy cow, did it! Honestly, this product is a replacement for sizing all together if you have a ring that's not worth the money it takes to resize, or even an heirloom ring you don't want a jeweler to *possibly* mess up. Immediately after receiving it, pulled it out of the package and tried it out. (see the uneven-ness of the clear product with my impatient self waiting for it to fail). It's completely invisible while you're wearing it. I only needed it on the bottom and a little on the sides but you can definitely go around the entire ring if needed! The product states if you're looking to remove the clear "padding" soak in warm water and pry it off with a hard object like a toothpick. I do a lot of dishes/cleaning with harsh products and never wear gloves so I was a little worried that it would wear off quickly and need to be re-done but it's been about 2 months and it hasn't budged! This Product was super easy to use, came with everything you need to get the job done. (everything besides the block the USB goes into but i'm sure they figure everyone in the world has millions of those laying around their house). Also there's probably enough in the product container to size 500 rings a couple times over! Definitely a must if you are looking for an easy way to size a ring yourself!
Marisa Pope
June 3, 2025
Seemed so easy. It's really just epoxy you put inside the ring. After one day, my finger started to sting.I thought maybe I'd made it too tight. I removed the ring to find the area where the glue was had swollen and inflamed. I looked at the glue itself and it was now dull and whiteish (presumably from my skin cells, dirt, debris). Two days later, my finger is still inflamed, so I'm hoping in time the stinging, pinching sensation will subside, but I'd caution people about this product. It could cause an allergic reaction.
Shopper
April 27, 2025
This ultimately works, but may take a few coats. Each coat takes me 8-10 times under the light to solidify. The thing provided to hold the ring isn't the best.
isrodtemple321
April 24, 2025
I can't speak more highly about this product. After overestimating the size of the engagement ring for my partner, I figured that I could resize it to the right size. Unfortunately, this was not the case. It turned out because of the side stones, I could only size it to within a half size of the target size. After contemplating different methods as to fix this, I finally settled on this product. I was hesitant, but after carefully adding a few layers, I was finally able to get it to the right size! My fiancee has loved it. The silicone provides just the right amount of give, especially when he finger swells up, without it being so hard on her skin. Definitely a life-saver. Easy to use. A little scary to approach, especially when you want to get it just right. But it's fine, especially cuz you can shave it off if you need to start over. Definitely, recommend.
Customer
April 22, 2025
Worked really well on my ring. Easy to use. Makes my ring fit so much better now. .
N
April 9, 2025
Worked excellently on my oddly shaped signet ring. Had to do 2-3 coats but did the trick.
CMT
March 21, 2025
Easy to use, smooth application and smooth feeling when putting ring on. Cures just as it says, excellent way to get the precision fit you need without having to bring your ring in for an adjustment. Highly recommend this and will use on other pieces that are too big.
Tanym
December 29, 2024
Works fantastic. Although having the holder was a nice idea, my ring is two soldered together and is top heavy and uneven on the band, so it wouldn’t stay pinched or upright, so won’t work for everyone. I used a hair clip and a shot glass to hold it up while curing.Also one less star for the fact that it is just epoxy resin that isn’t the healthiest, especially long term or for sensitive skin. But in a pinch it’s lovely and so easy to use if you go in small layers. Also make sure you have alcohol or hand sanitizer to make it stop being tacky.
MARY D
November 29, 2024
I purchased this back in July and put it on 2 of my white gold rings... I am absolutely amazed... the product is still on the ring, not of it has come off, peeled off or compromised my rings in anyway... I had purchased so many other ring sizer products before and none of them measured up to this and frankly were a waste of money. Other sizers are visible while wearing... with this product you cannot even tell it is on the ring. I actually had to put a few layers because my rings were so big and like I said the product is still adhered to the ring! Great, great product!
Recommended Products