Your cart is empty.
Your cart is empty.Troy Taylor
2025-08-27 13:51:53
The media could not be loaded.
Just me
2025-07-05 09:01:41
Fixed my wonky resin printer Z axis, I had to 3d print a custom nut to fit the 3 hole pattern of my printer, but it was a fun project and it worked well.
Connor Dieringer
2025-06-30 18:54:24
This will work with a photon mono 4k but with the brass bit that stabilizes the rod the holes don't line up fully if you drill the holes out with a 9/64 bit you can get at least 3 of the 4 screws in I made the mistake of offsetting one hole so I only got 3 but I believe you can get all 4.
William
2025-06-04 15:26:13
Low quality motor which has already stopped working within weeks of installation. I purchased this stepper motor for my Elegoo Mars Pro, and used it for only 1 week before it started buzzing and having severe z axis binding. Pay for higher quality parts or simply another manufacturer because this one isn't it.
nick
2025-03-18 11:30:24
Stepper motor works with the Photon S but it is 15mm too long so I had to drill a hole in the aluminum plate at the top. Also the wiring isn't correct off the line so make sure you swap the two center wires. Other than that these motors are perfect.
Levonia
2025-03-10 10:47:51
This 240mm motor has the proper housing and connection for the Elegoo Mars 4 9k, but is about 25mm shorter than the original. Overall happy for the quick fix but recommend contacting Elegoo support for a proper length product (~$18+$15 shipping but takes a while to arrive). Still glad to get this motor so fast to get back to printing. Hopefully it lasts!
Yankee Farmer
2025-03-07 12:11:31
These work very, very well; very smooth, straight, and powerful. My machine uses 2 Z-steppers, so I had to increase the max. current on the driver, and add a heatsink. A note to Repetier users: The leadscrew calculator lists a T8-2 leadscrew, but the value this calculator returns must be divided by 4, for example, the motors are a 1.8 degree step, and my driver is set for 1/16 step, giving 3200 pulses per revolution. On these 4-lead screws, 1 revolution gives 8mm of travel, so the correct Z-step setting is 400 pulses per mm. Hope this helps.
Red
2025-03-03 17:05:36
Nice stepper motor.
C. Tem
2025-01-25 14:42:44
240 mm Version benötig für den Einsatz im Photon Zero einen leichten Dremeleinsatz und einen Poltausch des Kabels von Rot und Grün. Klappt dann aber super. Macht einen besseren Eindruck als die Orginal Z-Achse.
David Martos
2025-01-11 11:29:48
Perfecto para el recambio de motor de la Photon s, como dicen los compañeros de abajo, hay que cambiar los cables centrales para que funcione, pero nada difÃcil!
nizoo
2024-12-22 20:43:48
Excellent motor and especially customer service.
Anthony
2024-12-19 09:11:04
Je mets 4 étoiles et non 5 car la tige filetée, que j'ai reçue, fait un petit peu plus de 210mm et donc elle est trop longue de quelques mm. Ce qui m'a valu de tout démonter et de tout remonter plusieurs fois afin de trouver d'où venait le problème. Mais une fois tout en place (avec des rondelles pour espacer), cela fonctionne très bien.NB: pour le câblage, j'ai inversé les fils: bleu à la place de noir et rouge à la place de vert du coté du connecteur à la carte mère.
Attila Terragni
2024-12-05 10:35:46
Mi serviva un motore compatto ma dovevo sollevare un peso consistente. Questo piccolo motore ha risolto brillantemente il problema. Ovviamente è più lento degli omologhi con passo 8mm (fino a 10mm/s se la cava comunque benissimo), ma ha una forza incredibile e l'irreversibilità della vite è un pregio per il mio uso
Recommended Products
$24.99
$ 11 .99 $11.99
$79.99
$ 31 .99 $31.99
$22.59
$ 10 .99 $10.99