Your cart is empty.
Your cart is empty.Product Description
Jandy 4715 3-Port 1-1/2 to 2-Inch Positive Seal NeverLube Valve.
From the Manufacturer
Jandy 1.5-inch to 2-inch Positive Seal, 3 Port NeverLube Valve
Gregory Scott Gibson
August 29, 2025
We own a small family pool business and install several inground pools a year. Use these on every single one of my pools, usually for the lines going to the pump coming from the skimmer and the main drains. If I only have one or two return lines I will use these as well. If I have more than two return lines then I will typically make a manifold with ball valves. These Jandy valves work great
Eric
August 18, 2025
I recently replaced 2 broken ball valves with this Jandy valve while installing a new pump and salt water chlorinator on my pool. This valve simplified the setup. I have 2 incoming lines from the pool to the pump; 1 from the main drain and 1 from the skimmer. Originally with the 2 ball valves, there was a danger that both valves could be closed, blocking any flow from the pool to the pump and damaging it. This valve's design simply doesn't allow this to happen. There is no way to cut off both feeds to the pump.I also reconfigured the valve to apply the "inlet" opening on the side instead of the front port as it is shipped. This was fairly easy, simply by rearranging the cover to make sure "inlet" faced the pump.Overall valve construction feels strong. I also like that I will be able to service the valve in the future without having to re-plumb anything. These valves have been around awhile and you can easily find parts if needed.
Kelvin Jones
August 9, 2025
Excellent
SteVac
August 8, 2025
My pool’s old 3-way valve was a 33-year-old Jandy but a compact version that’s not a popular model and parts are not as readily available. All it really needed was a rebuild kit but I figured that after 33 years I should just byu a while new one. And, why not go with a Jandt again since the original one lasted all this time. The new one’s a perfect fit and works absolutely perfectly with not the slightest bit of water leakage out or air getting sucked in.
MarkR
August 3, 2025
i am not sure why a simple pool valve needs to cost this much but they are solidly built and functionally integral. I replaced all 4 Jandy valves this summer on my 15 year old pool. The valves had deteriorated in the Phoenix sun and were losing their structural integrity around the screw joints. All four are working perfectly and the PVC connections are accurate and perfectly aligned. Fully recommend this product.
aceman
July 7, 2025
Made well and works with 1.5 and 2 inch fittings
Chris in Freeland
June 14, 2025
I needed a 3 position diverter valve for a lawn irrigation project that uses the water from my basement sump pump to water my lawn. I had to add a second outlet for my sump pump in my basement so it could fill a holding tank. The Jandy valve selects where the water goes: out to the ditch or, up to the tank. And that was very important! Whatever position this valve is in, water can be pumped out of my basement! It cannot be turned to a closed position. I think most people use this valve for pool water systems and that's probably what it was designed for. But, it was exactly what I needed for my project so I took a chance. The valve inlet side can be re-configured to whichever port you choose, just disassemble the valve and rotate it into the desired position and reassemble. There is a "CLOSED" indicator on the valve handle to clearly show which port is closed off. The instructions tell you to disassemble the valve before gluing anyway so its not an extra step. The only thing that confused me when I was ordering was what piping size was this valve? 1,1/2"? 2"? Were the ports different sizes? I couldn't tell from the description. But the piping sizes are clearly noted in the instructions and on the valve but for anyone curious it accepts a 1,1/2" sch40 PVC pipe on the inside diameter of any port and a 2" sch40 PVC pipe with a coupling mates to the outside diameter of any port. The sump water I'm using it with is fairly clean but it will get some mineral build up over time. If the internal seal fails I can get a rebuild kit for it and fix it in place without having to re-pipe everything. Its been installed for a few weeks and its working fine.
Mary Patel
June 13, 2025
Needed it in a hurry and it works perfectly for the pool.
Corriagh
June 5, 2025
Used this for a heater by-pass. Easy to install.
Customer
April 3, 2025
I should of bought those when I got my pool. They are perfect . Quality 100%.
Mario C
March 16, 2025
J'ai été surpris cette valve se manipule facilement sans forcer.je le recommande.
JPF
March 2, 2025
Can't beat the price. Using for a grey-water bypass valve and this thing is tough as a tank.
Andre L.
January 26, 2025
J'étais tanné de changer cette pièce souvent celle là beaucoup plus solide et bien fait
Recommended Products
