Your cart is empty.
Your cart is empty.Product Description
Specifications
- Brand New Exhaust Manifold Kit
- Material: Stainless Steel
- Included Heat Shield
Fitment
Replace Part Number: 33007072, 4883385, 674-196, 10105812
- Replacement For Jeep Cherokee L6 4.0L 1991-1999
- Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992
- Replacement For Jeep Grand Cherokee L6 4.0L 1993-1998
- Replacement For Jeep Wrangler L6 4.0L 1997-1999
- Replacement For Jeep Wrangler L6 4.0L 1991-1995
- Replacement For Jeep TJ L6 4L 1997-1999
Include:
- 1x Exhaust Manifold
- Includes all necessary gaskets and downpipe hardware
Willie Blues
2025-09-03 13:32:03
Great exhaust header! No worries! Went in easy and fit was great!
Aaron
2025-08-02 13:38:07
Some reviews said it had clearance issues. It was close until I torqued all the bolts. Plenty of clearance. Better bargain than the Dorman
michael h
2025-06-15 18:09:54
Does what it should. well made and Great fit. I used a fel-pro gasket, but the gasket that comes with looks like it would work just fine...it's thick enough. I used the donut that came with the kit and that works fine.BE SURE TO CHANGE THE ENGINE MOUNTS!!Bad engine mounts are usually the cause of the manifold cracking!Good pipes can crack if you do not replace the mounts, so that is part of the job.
Anonymous
2025-06-02 13:16:56
Seems like good quality manifold and fit perfectly.Didn't use donut gasket because it looked questionable,Didn't use manifold gasket because it was damaged during shipping.
Nychelle Rodriguez
2025-05-12 11:46:34
Please change your motor mounts while performing this job! It will be much easier with intake and exhaust manifold out. Also the worn motor mounts cause some of the cracking issues. For the money it is a great buy. If all you want is to end the annoying ticking leaking exhaust sounds or eliminate the exhaust odor from the engine bay this is your fix. Decent thickness in the tube's. Welding is so so. I used a flashlight yo make sure all welds were sealed and it all checked out. I quickly sprayed it wirh brake cleaner and used exhaust manifold paint to just help it last a little longer from rust. Recommend fully! For a little over 100 dollars its awesome. if you're expecting perfection go spend your money on another site not Amazon, come on be realistic.
Sam Green
2025-05-01 17:16:27
Fit my 98 Grand Cherokee 4.0 great. Its been 6 months no problems yet.
Thunderdog
2025-04-27 11:29:17
Replaced my stock manifold on 1992 Wrangler 4.0l with this and ran the TJ front pipe from walker to redo my exhaust. Everything fit just fine. Its a little close to the block with the thinner felpro gasket, but seems fine. Painted it with 2000c ceramic paint and used a felpro gasket. Everything is great so far.
Chris VanDuyn
2025-04-20 15:36:10
This is how it was delivered. The outer box was ok, but the inner box was torn, and the gasket hanging out of the hole, bent.However, I've heard a lot about the quality, and straightness. I bought a felpro gasket for it. Put a straight edge on the flange, was only maybe .020" out overall. Not bad. Welds look great. Inside, the pipes were cut well and not protruding through. I'd buy it again.I put a coat of VHT header paint on it before I installed purely personal choice.I would buy again.
LIZBETH FUENTES VELASCO
2025-03-17 15:15:02
Llegó en excelente estado
Kevin Coughlin
2025-03-13 16:06:23
Dito the headline . No complaints at all. Cheers
Customer
2024-12-31 13:31:30
Manifold fit and finish was good, gasket not so much, bought a fel-pro intake exhaust gasket to use instead. Flange gasket worked fine.
carter langlois
2024-12-11 13:01:36
It took a while to get parts ???
Philip Wilson
2024-11-13 15:50:17
All good. Perfect replacement.
Recommended Products
$29.99
$ 12 .99 $12.99