Your cart is empty.
Your cart is empty.Product Description
1U Quality Vented Rack Shelf for 19 Inches Network Cabinet or Rack
- Rack shelf with Lip and No Lip
Rack Shelf with Lip for Holding
- Compatible with all 19” racks and cabinets to hold various IT, network and other equipment.
- In order to avoid any dropping, there is a lip at the front ( 0.56 " high) and a lip (1" high) at the back.
- The shelf Lip can be upside or downside according to your different usage.
Rack Shelf with No Lip
- Compatible with all 19” racks and cabinets to hold various IT, network and other equipment.
- In view that some customers don't need the lip and the lip accurs the rack space, we develop this 1U Universal Rack Shelf with No Lip.
- An extra stiffener at the front makes the shelf stronger.
Different Installation Methods to Meet Different Needs
The shelf can be assembled according to your needs. Lip can be installed in different methods for meeting your different needs.
Common Features
Vents Maximize Airflow
The Vented Rack Shelf maximize airflow and prevent overheating.
Including M6 Rack Screws
Besides the screws of assembly, M6 Screws with cage nuts are also included for mounting easily.
Easy Installation
Only need to assemble the holding sides onto the middle shelf.
WHT
2025-08-19 14:58:44
Thick material very sturdy. Will last for years
Jazaddict
2025-08-08 18:12:14
The reviews that lament the assembly required are missing the point that the these are adjustable. It’s not one size fits all. No. The shelf can be installed with retaining edges up, or as a flat smooth surface. The rack ears can be attached in a few different ways to accommodate myriad different equipment sizes. Or just install them to make the shelf look and behave like the more expensive competitors that don’t adjust. Light, rigid, vented.Highly recommend, I hope I can find these again someday if I need rack shelves
Bob in Central Oregon
2025-07-21 17:22:12
I needed a shelf to hold a few smaller network appliances in my server rack, and this one appeared to fit my needs. The shelf itself meets the needs just fine, more than strong enough to support the small add-in gear I need it to hold anyway.But...The rack rails I'm using are already threaded for the mounting screws, with the tapped holes on standard spacing for equipment. The little mounting brackets for the shelf have the slots for the rack screws at 1.5" spacing, where a standard 1U fitment uses holes at 1.25" spacing. This may or may not be a problem if you are using a slotted rack frame and clip-in nuts, vs. the already-threaded rails in the rack I use.For me, it was just a bit of work with the shelf brackets in a vise in the workshop, and some careful work with a small rat-tail file to widen the slots in the face about .125" (one eighth of an inch) each towards each other, effectively getting to the correct spacing for 1U equipment.Once the slots were opened up, the whole shelf unit slid right in and we were off to the races.Measure the available space in your rack and the available fastener spacing in each rail. If you can get to 1.5" screw spacing, no modifications will be needed. If you have only the standard 1.25" for 1U, plan on that little bit of modification to the shelf mounting ears. The pieces are shipped loose for field assembly, so it's quick and easy to hold one up to your rack rails and even do a trial fit with just the brackets to make sure they will work in the rack you have.
Rose H
2025-07-16 13:59:06
I needed these for my 19†Hardigg Shockrack 16RU case. I tried building/installing them upside down to work more like a tray rather than a shelf. After some trial and error I installed them as directed all worked well.
Skip
2025-06-30 15:15:22
Easy to assemble and works well
Lee
2025-05-29 13:45:46
Great sturdy product.
Bigddybn
2025-05-22 17:50:44
These seem like they'd be flimsy but once you have them together they're surprisingly sturdy. They can be assembled with the shelf on the top or the bottom of the mounting points. The "vents" are good for zip tieing small electronics to that might otherwise get yanked off by their cords or bumped off the shelf. I use one to secure a cable modem, firewall appliance and small backup NAS in a rack. 20 cents worth of zip ties on these shelves and I don't have to worry about them any longer.
C. Ramirez
2025-04-30 16:34:36
I love the modular design - you have the option to install this with the "backstop" up, if you're storing a bunch of small items or documents on your shelf - or down, like when your network device is just a bit deeper than the shelf itself. These replaced a Pyle shelf that was a complete disappointment; the Pyle was flexible and there was no way to install it without the backstop facing up. I'll reorder these whenever we do a net-new install!
Rebwar safari
2025-03-26 19:37:12
Great product, it fits perfectly and is very sturdy. I do recommend it.
Armando sauceda
2025-03-23 14:03:29
Producto muy resistente! Material grueso y resistente
Sebastian S.
2025-02-17 16:13:50
Leicht zu montieren und für leichte Geräte gut geeignet. Eine USV würde ich eher nicht darauf platzieren aber das NAS und Backup tragen sie ohne Probleme
FanfanDeLest
2025-02-05 10:57:57
Contrairement à d'autres étagères, elles sont arrivées en très bon état (pas de patte pliée)Emballage bien fait, très pratique pour poser des box Ikea, Philips Hue, RaspberryPi ou mini PC.Cela laisse de la place derrière pour passer les câbles ou les bras ;)
KLMR
2025-01-28 12:39:16
Este juego te puede salir por unos 25 euros en algunos momentos, de manera que democratiza el uso del estandard de 19'' para aquellos que no pueden pagarle 5-10 veces mas a un "proveedor" o un "distribuidor oficial" que te certifica una bandeja metálica.En mi caso la tornillerÃa era de bastante calidad. Aunque el sistema de fijación de las orejas es un poco MEH y requiere de herramientas extras si lo quieres apretar bien.
Recommended Products
$44.07
$ 19 .99 $19.99