Your cart is empty.
Your cart is empty.Reinforcing Wire Mesh is designed to be used with Plastic Welding Kit repairing bumpers and Kayaks and many others. This mesh can also be used to fabricate any thermoplastic (meltable plastic) tabs, fill holes, and provide reinforcement. Each sheet of mesh is 5 inches by 8.75 inches.
Customer
2025-09-04 15:23:23
A must have when plastic weilding for reinforcement of larger areas.
norma fralin
2025-08-30 15:48:23
I ran across these when a mouse chewed a hole under my garden tub and made a nest. The durability is great, I haven't had any more mouse coming up through it. It was easy to apply and great price and and everything the seller said it was. I will be getting more. And I definitely recommend these.
Kindle Customer
2025-08-22 15:52:00
Great delivery time, going to use it to repair dashboard in my pickup. Have not used it yet but sure it will do the job well.
Mark
2025-08-15 10:27:20
This makes a much better repair when you bond the stainless mesh with the plastic
rainman
2025-08-12 11:29:36
Form fits easily with your fingers. Cuts easily with snips. ABS sticks to it great and presses into your work to add more filler rod. Great for structural integrity to keep the main abs from cracking again. Will hold it in place and can't break apart again and Should not crack if enough abs filler rod is applied properly. Don't skimp and it should serve you well.
Danny R Adamson
2025-08-11 10:00:33
Worked perfectly, just as described with the plastic welder bouht at the same time.
Skyopen
2025-08-05 14:20:13
NA
Arnell
2025-08-04 21:32:20
This is a must-have if you're doing any plastic welding. There is not much to this other than if this works or not. It works. It's easy to cut with scissors, but I'd advise using an old pair or a utility knife as it will dull a knife if used a lot. Once cut, these are very easy to shape. I did use this on a fresh water tank for a corner and it worked well. I would recommend.
Nick
2025-07-28 12:35:18
Just like a diaper but better. Put these in your bung hole and it seal the deal. Works well with the kit
Antonio
2025-07-01 10:26:33
This is definitely a mesh made of stainless steel.Can’t find anything else to add….
karen
2025-06-28 14:35:07
works great
landon fehr
2025-06-26 14:06:21
There should not be a picture of two if it is only coming with one. What a waste! 0/10
Interested Customer
2025-06-18 13:21:43
Works well with plastic welding. Only one piece, when the add copy leads you to believe there is at least two. Incredibly expensive for just one piece.
Customer
2025-06-16 13:34:37
A must have when plastic weilding for reinforcement of larger areas.
norma fralin
2025-06-15 14:10:22
I ran across these when a mouse chewed a hole under my garden tub and made a nest. The durability is great, I haven't had any more mouse coming up through it. It was easy to apply and great price and and everything the seller said it was. I will be getting more. And I definitely recommend these.
Kindle Customer
2025-05-31 10:26:47
Great delivery time, going to use it to repair dashboard in my pickup. Have not used it yet but sure it will do the job well.
Mark
2025-05-19 17:07:09
This makes a much better repair when you bond the stainless mesh with the plastic
rainman
2025-05-07 10:34:32
Form fits easily with your fingers. Cuts easily with snips. ABS sticks to it great and presses into your work to add more filler rod. Great for structural integrity to keep the main abs from cracking again. Will hold it in place and can't break apart again and Should not crack if enough abs filler rod is applied properly. Don't skimp and it should serve you well.
Danny R Adamson
2025-05-01 17:08:04
Worked perfectly, just as described with the plastic welder bouht at the same time.
Skyopen
2025-04-28 10:17:02
NA
Arnell
2025-04-27 09:39:54
This is a must-have if you're doing any plastic welding. There is not much to this other than if this works or not. It works. It's easy to cut with scissors, but I'd advise using an old pair or a utility knife as it will dull a knife if used a lot. Once cut, these are very easy to shape. I did use this on a fresh water tank for a corner and it worked well. I would recommend.
Nick
2025-04-21 11:20:31
Just like a diaper but better. Put these in your bung hole and it seal the deal. Works well with the kit
Antonio
2025-04-20 18:25:29
This is definitely a mesh made of stainless steel.Can’t find anything else to add….
karen
2025-03-06 12:00:24
works great
landon fehr
2025-02-05 11:40:12
There should not be a picture of two if it is only coming with one. What a waste! 0/10
Interested Customer
2025-02-01 09:34:47
Works well with plastic welding. Only one piece, when the add copy leads you to believe there is at least two. Incredibly expensive for just one piece.
Recommended Products
