Your cart is empty.
Your cart is empty. Will pull your VE, P-Pump, VP44, and CP3 pump gears.
Includes 4 heavy grade bolts.
You will only use 2 depending on the pump gear you are working on.
Will remove injection pump gear from all VE, P7100, and VP44 engines without timing cove removal.
On some CP3 engines the timing cover will interefere with an external puller -
on these engines the timing cover will have to come off before the gear can be pulled-this only applies to some 2003+ engines.
Will pull any 1989-2002 Dodge Ram Cummins Injection Pump Gear. Will pull where others bend
Ms.Saigon
August 3, 2025
Ordered this part for my fiance so he could replace the fuel pump on his truck. His truck is a 2011 Dodge Ram 3500 Laramie 6.7L; apparently it did the job as he didn't complain or have any issues with it fitting. It's cheap too. I don't know much about parts but this seemed to do the job compared to other gear pullers that were slightly more expensive. It came on time too with free one-day shipping and was intact in the package.
Johana salas
July 22, 2025
Exelente
jill bradley
June 11, 2025
The media could not be loaded.
Dylan
May 16, 2025
I was in a pinch needing this asap. I was skeptical about the $15 price actually working but it was worth it being that it showed up the next morning. Took me longer to un-box it than I spent installing it and getting the fuel pump out of my ISL Cummins.
Ronald Hainsworth
April 13, 2025
Worked as advertised for removing VP44
Sarah Spiegelhauer
April 5, 2025
Worked like a champ for a cp3
Theodore Enterprise
February 9, 2025
looks cheap & was cheap worked very well as needed
Juan A.
January 20, 2025
This should work but the puller is not really finished, I had to weld on a shoulder inside so that it would not slip when I tightened the bolts.
Recommended Products
