Your cart is empty.
Your cart is empty. Two Installation Methods
The wall mount stainless steel bathroom shelf organizer can be glued without holes and also be installed with screws; all mounting hardware (glue/screws/wall anchors) included.
Adhesive Mounted Instructions
Installing with our glue is simple and will not damage your walls, but its only suitable for tile, marble, metal, glass surface.
Step 1:
Squeeze out a little more nail-free glue onto the back of the metal rack.
Step 2:
Press the metal rack against the clean surface firmly for 15 seconds to make the glue evenly distributed.
Step 3:
Fix the metal rack to the wall with auxiliary tape to ensure the rack will not be moved, wait for 72 hours.
Step 4:
Tear off the auxiliary tape after 72 hours and install the hooks. Installation complete.
Drill Mounted Instructions
Step 1:
Mark the screw spots by aiming the wall-mounted metal rack to the wall, drill at the spot with a 6mm electric drill.
Step 2:
Insert the plastic sleeves into the hole with a hammer.
Step 3:
Align the holes of the metal rack with the plastic sleeves installed on the wall.
Step 4:
Install the screws into the plastic sleeves with a screwdriver. Install the hooks. Installation complete.
Package included:
1 x Kitchen Utensil Rack
6 x Detachable J-shape hooks
1 x Glue
4 x Screw
4 x Plastic anchors
Michelle
2025-08-31 10:47:59
I have a small kitchen and this leaves me with more counter space
Anne
2025-04-09 13:19:12
Since there wasn't a separate installation sheet included, we tried to follow the directions on the box, which were not in English. Then my husband just drilled the holes and installed it. I am using it for coffee cups in my "coffee corner". At first I wasn't sure I liked the fact that the hooks were not attached to anything. After using this for awhile, I now like this idea as some of the coffee cups we use are of different sizes.
Ronald Good
2025-03-04 21:22:59
I finally got it mounted using my own set of screws and drywall anchors. The ones they provide are too light weight and the screws are wood screws when what is needed are flat head screws for metal fixtures. But I used my heavy duty drywall anchors and screws and got it up securely. The sliding hooks did not all slide and had to be pushed down because they were too snug. However, the end result is very satisfactory.
Brigitte
2025-01-11 18:03:10
100% satisfaite
Recommended Products
