Your cart is empty.
Your cart is empty.KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Gerald Solano
2025-08-31 17:58:13
.
Honest Reviewer
2025-08-05 15:33:55
Used these bushings with KYB shocks. OEM replacement. Literally. Used top hats off of a ‘99 civic. Have Eibach lowering springs installed with this setup.
John H.
2025-07-12 13:43:00
Exactly what I needed.
Reggie
2025-06-13 09:05:05
It’s an OKAY part, but there’s always room for improvement.
cris_crozz
2025-05-02 11:43:00
Good Quality bushings. Complete with necessary hardwares. Ordered a pair of there. 1 order is for 1 side only so you have to buy 2 to cover both left and right.. or four to cover all corners. Bought these for my 1996 Civic Hatchback when I was replacing the bad shocks. This is a PITA to put back in.. I was contemplating on just using the old bushings but they are badly worn I decided to just deal with the tough task of putting these in. I had to assemble the old shock with all the hardwares except for the coil springs. Tightened them pretty good and left it like that overnight. That made these bushings kinda settle in. Coz when new.. these are taller and harder than used bushings and you won't be able to put the locking screw on the damper piston to lock everything in place once you've got the bumpstop, bellows, washers, coil spring, mounting plate/insulator in.
Bishop Brawler
2025-03-04 10:54:43
The top nut on my rear coilover came off unbeknownst to me. Rattle rattle later, I took it to a shop. They said the nut came off, the rod juggled, chewed up the rubber bushings so it'd be best to buy a new coilover.Have you ever tried to buy just one coilover?? Well, it's impossible. Everywhere sold them in sets of 4. I was defeated and feeling down. I later found the nut, took apart the coilover and thought to myself if these bushings are universal or can be bought separately. Bought some at AutoZone which almost did the job. Lasted about 3 days till the rattle came back.Saw these on Amazon, ordered them on a hope n prayer. They were the exact match to my Tien Coilover's bushings. It's been 3 weeks and holding strong. I drive hard, I take corners like an a-hole and still they hold on.Thank you manufacturers.. thank you.
Nala
2024-12-11 15:09:44
Installed easy with other KYB parts as according to the instructions- can't complain. The Amazon picture is misleading as it shows the mounting plate as well. This is just the rubber bushings and washer that go in the shock tower.
Otto Caldwell
2024-11-30 12:34:09
Please remove the picture of this item asap and replace it with the correct one. All you will receive is 2 very small rubber bushings in the center of the pictured part. They're not worth a nickel and will not solve any problem. The entire unit has to be replaced as pictured. The average price for the unit ranges from $25.00 to $60.00 depending on brand and source. I knew the price was off point, However, possibly it may have been a close out or something similar. No no no. This is the first time I've experienced this on Amazon. It's to much trouble to return and not worth the hassle. The vender won this time!! I'm not a sour loser and will continue to shop on Amazon because my overall experience has been great! Won't let one bad apple ruin the whole bunch!! Thanks for your concern regarding my purchase experience!!
Recommended Products
