Your cart is empty.
Your cart is empty.Product features：
Brand: KZ
Product name: 4 Core High-Purity Copper cable
Conductor material: Single Crystal Copper high-end Copper
Interface: 2PIN
Plug type: 3.5
Cable length:1.2 m
Notice:
1.Compatibility issues maybe were dependent on whether your music audio player was updated.
2.This 4 core cable with 0.75mm 2pins connectors & 3.5MM plug, pls kindly check your earbuds/audio devices connector before your purchase.
Douglas S Kraus
2025-07-19 17:16:32
This is a very nice soft cable that has a nice tight weave to it. It sounds great, and the connectors are high-quality. There are no ear hooks so it work with straight down connectors or can be worn over the ear. The chin-slider has to be my favorite for any cable I own, and all the connectors are a nice appropriately weighty metal, without being too heavy to overly weigh the cable down or anything like that. I highly recommend!
Robert E. Wade Jr.
2025-06-29 18:32:54
We use in-ear monitors extensively in our band and, over time, the cords stiffen and are less comfortable to wear. These serve as very good replacements. If I had any criticism, it would be that I'd prefer metal connectors over plastic, but for the price these are fine.
Gone Fishing
2025-05-08 13:00:35
Inexpensive yet seems just as good if not better than the original cable for my old KZ6's, and doesn't seem to tangle nearly as easily as the old cable did
Valhalla’s Gate
2025-04-21 14:23:53
I attached to this cable to several different IEMs. Multiple Shure in-ears, RHA Planar, and Westone. They all worked well enough. I was able to listen to music, podcasts, and videos without an issue. Good price for what you get and did the job in a pinch.The built-in DAC did not have much going for it. Audio quality was decent but nothing special. I had to adjust my phone volume higher than normal to reach my ideal listening levels. Each pair of In-Ear Monitors that I tested with this cable had started to produce a considerable amount of sibilance (hissing sound). In this case the “S†sound was most prominent and almost always constant. It made listening for long periods more of a chore and less enjoyable. When I reverted back to the original cables for each IEM, the sibilance went away.Cable feels a bit cheap and delicate. They have a rubbery texture that I am not a fan of. I ended up running it through my shirt in hopes of prolonging its life. The split tensioner for L and R cables kept getting held up on the rubbery cables.Pros:-Good price-MMCX to USB-c-Decent audio qualityCons:-Cable feels cheap-Rubbery texture for the cables-Sibilance-Lacks moldable ear hooksIf you have an intact cable that works and are looking for something other than a male 3.5 input, I would recommend an external DAC dongle within the same price point. I’ve had better success with those in terms of sound quality, but I’ve also gone through several of them that have a built in cable. Cable keeps breaking. Not ideal for active individuals, taking phone in and out of their pockets constantly and moving around a lot.Thanks for sticking with me on this long winded review.Happy Shopping
Anthony Frank Vorell
2025-04-19 17:26:46
Beautiful, well made, and sonically excellent. A little stiffer than I like but still an overall great cable. ðŸ‘
disfavored
2025-04-06 16:10:51
This is my second one of these and it lasted even less time than the first. Lots of noise, constantly losing connection to where I have to unplug and plug back in, sometimes it cuts out and has a painfully loud static noise. It seriously hurts my eardrums when it does this. Do. Not. Buy.
Sebastián C.
2025-03-17 12:03:38
Adds microphone to the IEMs and feels solid. The connector grabs onto the IEM firmly
DaSo
2025-03-05 16:53:30
Worked perfect for my needs. Thanks.
Angel Ivan
2025-02-23 15:58:54
Lo único peor que un cable que se descompone es uno que descompone al audÃfono, el conector de lado derecho está chueco y al rotar un poco tuerce el interior del conector hembra del audÃfono destrozandolo, primero pensé que mis audÃfonos se habÃan roto, pero después de unos segundos de conectar otros, el derecho comenzó a apagarse al girar un poco el conector.
Matt S.
2025-02-04 14:11:15
I have had the KS ZX10 Pro IEMs for a surprisingly long 5+ years, and ongoing, for use solely with a desktop PC in my home office. The KS's are used about 3-4 hours a week on average. The purpose with the KS's was just to have the sound play through them without disturbing someone else. The original cable seemed long enough that I didn't bother with cable experiments and left it as is.  I have done cable swapping with my AKG's Q701, Sennheiser HD5XX series and Shure SRH1540 where all of them allow aftermarket third party cables. Those headphones are lined up with a dedicated 768KHz DAC & headphone amp for Binaural, 3D, ASMR and headphone specific recordings. I have tried the KS's (with the original cable) with these recordings and wasn't too impressed. Thereafter, I only left them to be with the computer.Now that the computer was moved further away due to furniture re-arrangement, I need a longer cable. This KBEAR cable was bought for its 2 metre length so that the KS's can reach the computer. I didn't expect much more than that.What is surprising is that this cable totally transformed the sonic signature of the KS ZX10 Pro. The sound, with just the computer's headphone out jack, was so much better with this cable. I then tried the KS's & this cable with the 768KHz DAC and the headphone amp. What is most surprising is that the KS's, now equipped with this KBEAR cable, could practically compete with the AKG's, Sennheiser's and the Shure's. I went through the majority of the recordings with the DAC/Amp setup which I felt the KS's were unfit for and had to re-evaluate its strength. Sound played through this new setup suddenly opened up. The sound stage expanded and all human voices came "alive". The 3D'ness (depth, width & height, both front and behind) became much more pronounced.The KBEAR cable is a stunning surprise with the KS ZX10 Pro. I can conclude that the OEM cable, claimed to be made of 6N OFC, which came with the KS ZX10 Pro was literally choking all the essences of the Binaural, 3D, ASMR and headphone specific recordings. With the intent of just getting a longer IEM cable, I have found a gem. For what I paid, it is a steal.
Luis Alejandro Dela Cruz Morales
2025-01-04 13:05:24
Sirve para los audÃfonos pero la posición de la entrada hace que no entre bien con algunas fundas y como que no se conecta del todo bien al inicio y a veces hace interferencia con el volumen
Ismail
2024-11-29 12:33:41
Me gusta el diseño del cable, parece ser muy resistente y me gusta la construcción del cable.Se nota que es un cable de alta calidad.
Ithica 27o9
2024-11-28 15:57:30
Solid cable, the best of the three I've had (including and especially the actual Shure ones). The cable just gets a bit more stiff around the ears, which is a great compromise between the hard plastic and totally limp options. I've only had it a couple weeks so I also can't comment on durability. It works well, sounds good. I used it with upper end Shures.Edit: Still working well after 9 months or so of regular use.
Recommended Products
