Your cart is empty.
Your cart is empty. Specifications:
Arbor Size: 5/8"
Motor: 120V/60Hz/5A
No Load Speed: 3550 RPM
Blade: 7” Diamond Blade
Table Tilting Range: 0-45°
Table Size: 15-3/4” × 16-1/2”
Max Cutting Capacity: 1” Thick, 12” Wide
Package: 7-Inch Tile Cutter, 1 Spanner Wrench, 1 Nut Driver, 1 Instruction Manual
Features:
Reinforced impact-resistant tub
Lightweight, fully portable to carry
Chrome plated table to resist rust
Bevel cuts tile from 0 to 45 degrees
Water cooling system for wet cutting
Adjustable rip fence with miter gauge
Powerful induction motor with thermal protector
Simple structure, Easy to use, Easy to maintain
Make quick, precise cut in tile, marble, masonry, ceramic
Leegol Electric 7” wet tile saw, uses an adjustable rip fence with miter gauge providing accurate straight and miter cuts. Diamond blade ensures smooth cutting along with a blade cooling water reservoir that keeps the blade cool and minimizes dust and debris.
This tile saw is ideal on job sites where space prohibits the use of a large wet saw.Whether you’re updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the Leegol 7-inch Wet Tile Saw (3550).Users will be surprised by the strength of its true induction motor. This economical, yet powerful saw cuts through unlimited sizes of ceramic and tile.
Whether you’re a DIY lover, a crafter, or a woodworker, the Leegol wet tile saw is the perfect companion for every project on your list.
Sheepdog
2025-08-24 16:35:08
For the price this is a decent step up from my last tile saw. It's not perfect but I can live with the quirks. I love the all metal construction, feels much more sturdier than my last tile saw which was nearly all plastic. The chrome looks nice at first but will get scuffed by the bottom of ceramic tiles. I love the feature which allows you to bevel your edges and the added tool to cut at angle. Does take some practice but works. The wet saw comes with a guard but as with all saws i use i prefer to not use it, water will spray but I prefer to keep an eye on cuts. There is no quick adjust for the fence which is fine for this price point. The only thing I dont like is the measurement guide rather than being engraved into the metal is a stick on strip. I highly recommend making a cut first to make sure your tile measures the same on each end then you know your fence setting will be accurate. Again, this comes with the territory of a budget tile saw but it beats spending $150+ for a weekend job. This saw should last you through multiple small to medium jobs.
Luis Rayos Jr
2025-07-28 12:31:00
Great built a whole bathroom with it, still works like new
Kindle Customer
2025-07-07 11:37:28
This thing is great. I use it to cut stones for lapidary. Great deal, solid construction, very very quiet until you hit the diamond wheel with a rock but all tile saws are loud. I was suprised how quiet this one was at idle. The stainless table is awesome and easy to clean up after cutting. Only problem I had was mine was missing the guide bar which left me freestyling cuts and i like a guide so i can get nice even cuts. Cuts every rock I've put through it great and up to like almost a 2 inch depth across the blade. Sent emails, texts, and called trying to get the missing parts sent but theres no response. Contacted Amazon, they gave me an email link to China and the seller. I'm not keeping my hope up but making nice cab cuts by hand in the mean time. I also have 4 of their rock tumblers and they have been going 24/7 for months and no issues. Happy with the purchases for sure just send me the part! China, though? My expectations on receiving this simple part are pretty low. Blade is great and i can even grind off imperfections on the side like i like to. I let the stainless table dry in the sun then just vacuum and wipe it off. Been much better than my last saw from harbor freight but im just starting in lapidary. Eventually a 600 dollar saw will be in the works but for now this thing cuts anything i put on it. Quartz, jasper, agate, and good with the softer stuff too. Great buy. i might just get a piece of stock for the time being and cut it across. WIth the right amount of water this thing has treated all of my many stones very well.
gentry
2025-07-01 20:23:09
Needed a wet saw for my Subway Tile project. And a bathroom upgrade. Made over a hundred 6 inch cuts just for one wall. Probably 400 total of the long ones, and about a hundred shorter cuts.Water tray big enough to be useful, easy to refill and to drain....a wee bit finicky to remove first time.....but a no brainer. The installed blade is good enough too.......again....thinking value / dollars spent. Easy to avoid chipping at end of cut by just going really slow the last half inch or so.The cutting fence.....a bit awkward at first.....have to loosen then tighten a knob at each end of it. Moves easily enough to adjust. The rule lines are accurate and legible. Just takes a few extra seconds to line up near and far end. Again...we are talking an 80 dollar ...delivered...with blade....unit.Table is true. cleans up easily. And...for the tiles I needed to cut......3 by 6 and some 12 by 12 and sizes in between.......worked just fine.Compact size.... I don't know when I will use it again.......but, after cleaning up the tile debris / dust etc. and wipe down with WD 40 on the table, compact enough to store ......somewhere.
Customer
2025-05-16 19:02:56
It gets the job done for the price I’d say not bad . It is kinda flimsy for the homeowner not bad . If I had to buy one again I’d definitely spend a little more. I can see after a room or two it’s going to be a throwaway item
C. Huegen
2025-05-05 12:36:19
Don't bother. The motor wobbles around, causing crazy chipping on your work piece (I even tried one of my brand new good blades). ​The motor is vastly underpowered and will easily bog down and lock up. The fence (if you can call it that) moves around too easily and causes rough cuts. My blade guard arrived broken on one side. The water tray comes with a plug, but you'll be sticking your fingers in the soup to try and find it - and you can't slide the tray out without tipping it because of the blade guard.Mom used to tell me "if you can't say something nice, don't say anything at all". I couldn't hold my tongue here -- sorry, Mom!
Doc
2025-04-13 12:41:39
First time user, needed to do some simple tile work in one of our bathrooms. Managed to cut some travertine tile trim (I understand they are notoriously fragile) as well a a couple of the square ceramic tiles. The blade is maybe an inch high so my thicker angles needed two cuts, but I was happy with the results and the cutter. I’m not making a living from this cutter but it did the simple job here and maybe one or two in the future....although I’m thinking I needed to goof it up more so the wife doesn’t come up with too many more projects.
Illahee kid
2025-03-09 16:24:06
Inexpensive and works good for the occasional DIY project. I found it easiest to use without the guide and blade cover. The guide is a little awkward to adjust and unless you’re cutting several pieces the same size not worth the time it takes to set up. The blade cover helps to reduce water and chip spray but also prevents you from seeing if your cut is exactly on your scribed line. Just be sure to ware eye protection. The water tray is a little hard to get in and out but once you figure out the spin combination to remove and install it, it’s doable. In summary, it’s a good value and works great for a do-it-yourselfer.
james
2025-02-18 13:53:04
Good little saw for what I needed
Customer
2025-01-25 13:35:22
I like the value for its price. We used this for cutting tiles for kitchen back splash
james
2025-01-22 18:41:49
works good for the price, just go slow
Barry Reynolds
2025-01-19 17:42:47
Didn’t like the blade, to thick to get a clean cut.
célineLévesque
2024-12-19 15:49:57
Parfait
Recommended Products
$219.99
$ 99 .00 $99.00