Your cart is empty.
Your cart is empty.Product Description
The LENOX Tools Bi-Metal Speed Slot Arbored Hole Saw with T3, 1-1/8"-29mm, has enhanced tooth geometry that cuts 50% faster than previous LENOX hole saws. Twice as durable as our previous generation when cutting through metal, this bi-metal hole saw with a standard arbor features thicker walls to minimize tooth loss and improve durability. A staircase SPEED SLOT has a wide slot placed low on the hole saw and multiple leverage points to make it easy to work plugs out with a screwdriver. This design effectively removes sawdust and chips and helps prevent plugs from becoming stuck in the saw. 10% taller than previous models, it delivers cleaner cuts through two-by lumber.
From the Manufacturer
The Lenox Tools 1221818A 18A Bi-Metal Speed Slot Arbore Hole Saw, 1-1/8-Inch or 29mm outperforms all competitors in wood cutting, plug removal, and metal cutting applications. The patent pending Speed Slot features a staircase design for easy plug removal. The slot is wider than most and is placed lower on the hole saw with multiple leverage points to easily eject the plug with a standard screwdriver. The hole saw is 10-percent taller than the previous model to deliver cleaner cuts through two-by lumber. The Speed Slot efficiently removes saw dust and chips while producing a fast cut and preventing the plug from getting stuck in the saw. The new hole saw also features up to twice the life of the previous model when cutting metal. An enhanced tooth geometry, a thin kerf design and an advanced coating contribute to the efficiency of the cutting process by removing material faster, therefore generating less heat while cutting.
Zohaib Khan
September 1, 2025
I used this saw to drill holes for the Happ buttons for my Arcade mod. The buttons fit perfectly through the holes.
Bill
August 29, 2025
Drilled a perfect hole.
Ridgerunner
August 7, 2025
It seems to be sn invaluable tool if you do any amount of bathroom remodels. Used to cut hole in cultured marble to access shower head arm connection. The hole was clean, edges sharp with no chip out. Helped a friend with a bathroom job, once again the hole was clean with no chip out on an acrylic enclosure. So far it's performed great!
M. Veloso
June 2, 2025
I bought this for wood, but my kids have been using it to build their FRC robot. So now we know it works great on plexiglass and wood.The little holes to remove the holes work fine as well.
Joe Adorable
May 1, 2025
I use it to make holes in tennis balls for a walker and it is a lot safer then using a knife like I used to.
Steve
April 30, 2025
Good quality product at a good price
My dog
March 20, 2025
Lennox always made excellent hole, saws, arbors, and Pilot drillbits. You will not be sorry with this purchase, which is actually at a very reasonable price. My tip to everybody is to purchase Tap Magic, A threading and cutting lubricant. Another trick is to place a 1 1/4“ x 1/4“ hole fender washer, over the tip of the pilot bit, and. that will keep you from breaking the teeth off of the hole saw, When it goes through the metal. To drill out, the hole, with the pilot bit, and the hole saw, place some tap Magic, on the area that you are cutting. They will almost last forever.
RTS
February 27, 2025
EXCELLENT PRODUCT. I WOULD RECOMMEND IT TO ANYONE. THANK YOU.
J
December 10, 2024
Very well made hole saw. It comes with a decent pilot bit. The blade cuts well and takes a bit of time to wear down/dull. Very happy with it for the price.
Glenn Richardson
December 8, 2024
Works great
Recommended Products
