Your cart is empty.
Your cart is empty.Built-in Arca-Swiss dovetail mounting and includes a Quick Detach (QD) Socket for quickly attaching a compatible strap or sling 3/8" & 1/4" threaded mounting holes Lightweight, low profile and provides the best possible stability for your lens. Hard anodized, aircraft grade aluminum for maximum strength and durability Compatible with: NIKON Z 70-200mm f/2.8 NIKON Z 100-400mm f/4.5-5.6 VR S NKON Z 400mm f/4.5 VR S Nikon Z 600mm f/6.3 VR S
Anonymity
July 16, 2025
From Amazon and Ebay, I've purchased an approximate 12 Leofoto products. After reading the negative reviews on their replacement foot for the 70-200 f2.8 VR S lens, I was hesitant. I have been using using the Leofoto QD strap with Leofoto QD adapters attached to the OEM foot. But, I was tried of this arrangement and ordered this foot and the versions of the Leofoto QD 70-200 f2.8 VR Fl and the Nikon 300 f2.8 replacement feet. A perfect fit with all three lenses, even just hand-tight on the 70-200, there was absolutely no wobble. Having used a number of RRS and Kirk products, which were great, I have no reservations using Leofoto products.
Phil
June 25, 2025
Unfortunately, Nikon does not make an Arca compatible foot for their 70-200 and 100-400 Z mount lenses. This foot works well. Easy to attach and detach from the lens, and easy to mount on a tripod.
Customer
May 31, 2025
I decided to brave it and order this, having had wonderful luck with my other Leofoto equipment. In fact, the very same item for the Sony version of this lens is phenomenal. This product, however, is hot garbage.As seen in the photo, when installed, the lines do not mate up properly with the Z 70-200 f/2.8S. It does not feel AT ALL secure; when the knob is loose, the foot can wobble back and forth, up and down, etc. Only when you torque the living daylights out of it does it actually tighten on the lens. With A Z9 or Z8 body on the lens, the QD mount is too far forward to hang balanced, so the front of the element ends up pointing upward. The entire design of this product feels like it was for an entirely different application.I was hoping for results contrary to the other top reviews here but sadly, I'm walking away disappointed and am going to be returning this product immediately today. I cannot trust an expensive camera to hang from this or sit atop it on a tripod, so a competitor foot or OEM foot with plate will have to do.
Trouty
May 28, 2025
I was excited to get this at over 1/2 the price of a RRS version (which wasn’t available when I purchased this). I usually don’t go for the cheap stuff, because inevitably I end up getting the better versions. But I really wanted the QD function, which is an awesome way to attach a strap. So I decided not to wait for the RRS foot.The Leofoto just doesn’t tighten down. It’s secure, but the foot wiggles. Which makes it useless for slow-shutter speed tripod shots. And who knows if it will ever give out. Does not inspire confidence.So I ordered the RRS version today. Dammit.
Kindle Customer
May 23, 2025
Requires an adapter piece to make it work. SUpplied with the foot, but it makes it seem like the original machining spec was not that good. Still fits and works fine.
Clifford D.
May 20, 2025
The price is great over name brand but needs a bit of improvement
Bruce Leventhal
May 13, 2025
I purchased the foot with the hope that it would replace the original Nikon designed foot. While it is possible that the accessory sent was defective, the one I received would not tighten securely to my lens. Even when the locking know as tightened completely, the foot would wiggle and could be slid off by clicking on the release tab.I am not implying that all Leofoto feet are defective, but mine certainly was.
PenTEL
April 22, 2025
This foot seems well made but it won't tighten and always seems loose. I'm replacing with kirk.
Blair T.
April 21, 2025
Yes this is a nice replacement for the original foot, like the arca Swiss foot and QD option, but the knob to tighten it is so hard to use. When I swap it from other lenes I almost have to get pliers out to turn it and that’s only from hand tightening it so it doesn’t shimmy around on the connection to the lens.
Kunde
April 1, 2025
Great feature for a Nikon Z 100-400 telephotolens, to get a dedicated Arca Swiss plate for using a tripod. Feels solid and save.
Rolf Walter
March 26, 2025
Ersetzt den originalen zu kurzen Fuß.
Tim Siepmann
February 12, 2025
Woanders ist das Teil gut bewertet, daher habe ich es ausprobiert, aber dieser Klemmung vertraue ich kein teures Objektiv samt Kamera an. Getestet mit dem Z 70 200 2.8 S.
ralph_de
February 10, 2025
Der Fuß bietet das, was dem Nikonfuß fehlt, nämlich die Arca-Swiss Kompatibiltät. Daneben auch den sehr praktischen QD- Anschluss für passende Gurte.Die Verabeitung ist leofototypisch sehr gut, allerdings wackelt der Fuß in der Führung sehr stark, wenn er nicht angezogen ist. Das ist beim Original besser. Er rastet ein, daher keine Gefahr und wenn man ihn festzieht, dann ist er absolut wackelfrei - allerdings lässt sich die Schraube dann von Hand nur schwer wieder aufdrehen.Die Modelle von Kirk oder RRS werden besser sein, bei vergleichbarer Funktionaliät, kosten aber mindestens das Doppelte...
Recommended Products
