Your cart is empty.
Your cart is empty.This leveling scissor jack with 5,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 30" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces. Features: Levels and stabilizes camper Remains steady on soft surfaces because of wide bow-tie base Bolts or welds on Includes 1 steel jack. Specs: Capacity: 5,000 lbs per jack (Min. breaking strength) Extended height: 30" Retracted height: 4" These stabilizer jacks are only used on RV/trailers for stabilizing and leveling purpose. Never use for lifting, changing tires or supporting weight of any vehicles, the vertical static load should never exceed 1/3 of the rating. Improper use can result in property damage, serious injury or death.
Hector
2025-08-31 16:06:26
I hit one of my scissor jacks so I replaced it with this stronger 5000 pound model this thing is great. It can handle my 7700 pound trailer and no problems no buckling.
Tyrene
2025-05-12 17:27:31
It was a great replacement and arrived on time. Just one problem, holes didn’t line up so a drill was used.
Adam
2025-04-19 12:36:53
I've used this jack about 50 times to lift and lower 350lb objects.I've owned it for about a year now, and the screw shaft suddenly stripped out and got stuck. yay.It was working well up until that point, but I was expecting to get a bit more use out of it than this.
Steve Stephenson
2025-04-04 19:14:06
Sturdier than the original jack, will eventually replace all of them.
Jerry
2025-03-12 13:21:42
The item was promptly shipped from the seller, received in good order and the stabilizer was a direct replacement for the one damaged on my RV. Works better than the one I originally had.
Shari B.
2025-03-11 09:54:57
These jacks are much sturdier than the ones that came with the camper
Customer
2025-03-01 15:18:24
I’ve owned two of these now and both of them broke after about 100 uses, lifting only about 200 lbs. I used them to lift the roof of my custom camper. The threads will eventually start to become destroyed, and at that point it’s game over. It will only get worse. I guarantee it. If you get more than 50 uses out of one of these consider yourself lucky.
Keith Buhrer
2024-12-17 12:29:51
Installed quite easily just had to drill for 3/8 in holes in the frame. The old one was weld to the fram. Had to grind off pieces of the old jack. Since I have the right equipment to do the job it was not a big deal.
Recommended Products
