Your cart is empty.
Your cart is empty.Vickie Herrada
2025-09-03 10:15:28
Great product.
Ralph T.
2025-08-27 16:20:31
I have only had it for a week and only been able to use a few times because I had to get a reverse polarity switch which was supposed to come with it. It is shown in picture of items included and is also stated in description. Otherwise seems to work so far.
GPD4
2025-08-18 10:44:16
Works as expected.
Justin
2025-07-25 11:30:14
Absolute garbage the ram which is about the same material and thickness of a cheap curtain rod folded in half after about a dozen cycles
Vickie Herrada
2025-07-24 10:29:49
Great product.
Ralph T.
2025-07-22 13:37:13
I have only had it for a week and only been able to use a few times because I had to get a reverse polarity switch which was supposed to come with it. It is shown in picture of items included and is also stated in description. Otherwise seems to work so far.
GPD4
2025-07-14 15:04:34
Works as expected.
Justin
2025-07-09 16:01:40
Absolute garbage the ram which is about the same material and thickness of a cheap curtain rod folded in half after about a dozen cycles
Rod12056
2025-07-06 19:53:38
I measured my old one and this one matched right up and works great. It’s only a matter of time to see how long it lasts. I use it on my snowblower attachment for my tractor, so it sees colder temps.
Jason Thumann
2025-06-08 16:07:22
Was easy to install on my tractor. Works good and switch was east to put on my dash. End of cylinder could be more solid. My eye tore out and I had to fix.
Al O.
2025-06-07 11:33:04
For the price, wasn't sure what to expect but figured I would give it a try. Turns out, this is exactly what I needed to raise and lower the rear bed on my wife's 4-wheel "yard dog" she uses for yard work. Neighbor spent over $700.00 to accomplish same thing on his 4-wheel yard machine. His was hydraulic not electric but this one accomplishes the exact same thing at a fraction of the cost!It comes in different lengths so you need to determine the point of installation to determine the amount of "shaft" you need but that's easy enough, I used the 8" unit. Installation was very easy using the brackets provided with the unit; it bolted to the frame and then to a point on the lift bed. The two-way switch they provide accomplishes the needed ability to reverse the direction for up and down rather than a complicated controller seen with other units.Only had it a week or so now but so far.....I love it! Great product and transaction arriving on time and performing as advertised. I would strongly recommend it to anyone seeking similar need!!
MTC
2025-06-04 21:46:11
I have this tilting my 940 lbs solar array of 8 panels. Admittedly, the array is nicely balanced, so the motor does not have to work very hard, but this does the job with apparent ease. I took off a star since finding an enclosure to house the switch is going to be impossible. Will have to 3D print something - a cheap plastic enclosure should have been included.
Stewblues
2025-06-03 16:47:30
Souffleurs à neigeUn peu plus lent que j’espérais mais fonctionnel
Emmaly MacPherson
2025-05-02 21:06:23
Description says it can withhold 660 lbs. Absolutely not. Returned the item as it wouldn't work for what I needed.
Robert Bernatchez
2025-05-01 11:13:04
Pour une goulotte de souffleuse c'est mieux que d'avoir un fil pour l'actionner
larry
2025-04-29 21:24:07
Broke on first attempt...nobody for my application set upWould need something more heavy duty then this!!
andre
2025-04-20 12:05:36
Work good, but don't use it for ATV plow lifting, too slow and freeze in cold.
Rod12056
2025-04-16 17:20:42
I measured my old one and this one matched right up and works great. It’s only a matter of time to see how long it lasts. I use it on my snowblower attachment for my tractor, so it sees colder temps.
Jason Thumann
2025-03-17 13:46:05
Was easy to install on my tractor. Works good and switch was east to put on my dash. End of cylinder could be more solid. My eye tore out and I had to fix.
Al O.
2025-03-15 12:38:52
For the price, wasn't sure what to expect but figured I would give it a try. Turns out, this is exactly what I needed to raise and lower the rear bed on my wife's 4-wheel "yard dog" she uses for yard work. Neighbor spent over $700.00 to accomplish same thing on his 4-wheel yard machine. His was hydraulic not electric but this one accomplishes the exact same thing at a fraction of the cost!It comes in different lengths so you need to determine the point of installation to determine the amount of "shaft" you need but that's easy enough, I used the 8" unit. Installation was very easy using the brackets provided with the unit; it bolted to the frame and then to a point on the lift bed. The two-way switch they provide accomplishes the needed ability to reverse the direction for up and down rather than a complicated controller seen with other units.Only had it a week or so now but so far.....I love it! Great product and transaction arriving on time and performing as advertised. I would strongly recommend it to anyone seeking similar need!!
MTC
2025-03-07 21:27:20
I have this tilting my 940 lbs solar array of 8 panels. Admittedly, the array is nicely balanced, so the motor does not have to work very hard, but this does the job with apparent ease. I took off a star since finding an enclosure to house the switch is going to be impossible. Will have to 3D print something - a cheap plastic enclosure should have been included.
Stewblues
2025-03-05 14:10:07
Souffleurs à neigeUn peu plus lent que j’espérais mais fonctionnel
Emmaly MacPherson
2025-02-23 12:32:10
Description says it can withhold 660 lbs. Absolutely not. Returned the item as it wouldn't work for what I needed.
Robert Bernatchez
2025-02-14 13:57:54
Pour une goulotte de souffleuse c'est mieux que d'avoir un fil pour l'actionner
larry
2025-01-27 11:10:34
Broke on first attempt...nobody for my application set upWould need something more heavy duty then this!!
andre
2025-01-25 17:28:37
Work good, but don't use it for ATV plow lifting, too slow and freeze in cold.
Recommended Products