Your cart is empty.
Your cart is empty.As a chassis manufacturer, we design our entry steps to fit with our chassis systems. Each step has a rust-inhibitive surface and easily expands and retracts with one hand. Each step comes with grip tape and measures 24 inches with 8 inches between each step. The Weight Capacity of this product is 400 lbs.
Joan R
2025-09-03 18:43:01
Our original equipment step (just one level) gave us an 11" drop from the RV. Building codes don't seem to apply to RVs. Climbing in wasn't so bad but we were a little nervous that someone might slip coming out, so we looked for a better way. We have a Lippert chassis, so replacing the old one-step version with a Lippert two-step version seemed reasonable. Others have noted that there is a small gap (side to side) that needs to be filled with shims and that turned out to be the case. A few stainless washers used as shims on each side cured that problem.With RVs, I guess there is no One-size-fits-all. If we had mounted the steps as they came, ground clearance would have been a problem and we would have still had about a 9" drop from the RV. The side supports are pretty stout stuff, but I was able to cut out a 3 x 4" notch from each side with a Sawzall with a metal blade. It went really well and the result is a big improvement. Drop is now 7" and the steps are very sturdy.Another improvement is the ease of pulling the steps out. The new steps use a different design. Deploying the two is much easier than the original single step.
Jason in Indiana
2025-07-09 15:23:46
My wife has physical limitations and was finding it difficult to get into our 18ft camper with the factory single step. Once I got this installed, she finds it MUCH easier to get into our camper and she is very happy.I tried to find one of the newer door mounted steps all the new campers are coming with. But with the dimensions of our door and camper frame, no one makes a door mounted step that fits our camper.Once these are deployed, they stick out farther than most factory frame mounted steps. When I used the step the first time, I could feel how it rocked our camper due to the leverage of the longer step. So I also installed the Lippert Step Stabilizer on the bottom step and that removed most of the sway/rocking. For us, this was a must.Installation wasn't hard, but it wasn't easy either. They were slightly narrower than the factory step, so I had to get some longer bolts and add some super heavy washers as spacers between the step and the camper step frame to fill it the gaps. Also the holes did not line up quite right, so I had to oval out 2 of the holes in the step (didn't want to permanently mod the camper frame) so I could get the bolts to line up.I am happy with the setup and recommend this if your camper does not have a door mounted step option.
Wesson Hold The Wagon
2025-06-24 19:14:16
Worked right out of the box.....easy install and quality product.
LifeStoneAromas
2025-06-16 09:49:50
Replacement single step on Jayco feather light.This double step was exact fit replacement. installation was under 15 minutes removed old install new. Well made better than OEM easy to fold and unfold I applied little lithium grease to slides. Only negative is leverage the bottom step flexes quiet a bit when I step on it but weight limit is 300 lbs and I am 6'3 230 lbs so I am pushing max limit. I carry a 5" tall brick placing under step on ground once folded down firm's up no more flex. Most likely will attach some folding ground support later. Looks like there may be leg option since last step has 2 holes with rubber plug possible mount point for leg accessories. Also was warehouse deal must have been returned $70 or $150 new took chance $70 nothing that bad to pay 80 buck more for new.People really need to stop returning so much getting out of control be more informed about purchase be thoughtful not so wasteful contact seller if not sure Amazon just makes small businesses selling these items take the loss on returns all these returned items are hurting everyone even you.
harmonie
2025-06-01 18:03:17
Perfect fit for my 2013 shockwave toyhauler.Bolts were not included, used the originals. Very sturdy.
Mike byrom
2025-05-23 14:21:13
awesome
Tiffany Weaver
2025-05-10 17:02:23
Love the steps. Wish they would have come with the hardware though
Jrlyrnyrdskynyrd
2025-05-04 10:18:15
Replaced my original motor home steps. Upgraded the mounting location and these make us so sure footed now.
Stephen Wood
2025-04-05 11:26:46
In my case it wasn’t a simple install as the front bolts from the old 1 step matched-up but I hand to drill holes for the rear bolts (not a big deal). Also my old step bracket was 25†and the new was slightly bigger but was able to use a floor jack and push into place.The stairs work and look great now they are installed. Very happy.They are well built and seem very strong.Just be aware that it may not be a simple swap project
glen
2025-03-24 16:31:43
The steps are a direct replacement for the OEM steps. Awkward to hold in place and bolt it down just due to the weight, but took less than half and hour to take the old step off and replace with the new one.
Bern
2025-03-10 10:17:36
Good quality found easy to install
Rachel
2025-02-06 09:33:21
We bought these for our pop up camper and they worked well! The last step is very close to the ground/grass but it did the job!
Steve
2024-12-21 17:15:24
Unfortunately had to return because on my snowmobile trailer the wheel was installed in line with the door opening and was only 9" from the wallYou need a couple feet clear for the stepThe step appears to be well made.
Recommended Products
$19.95
$ 8 .99 $8.99