Your cart is empty.
Your cart is empty.The low-profile 4-ft. long FMLWL LED Wraparound by Lithonia Lighting provides efficient and economical ambient lighting in surface-mount applications. It is ideal for many applications including corridors, kitchens, breakrooms, utility work areas and stairways.
C. Edwards
2025-08-20 16:40:11
When I saw the size of the light strip, I was afraid it wouldn't be enough for my laundry room. It was installed easily and to my amazement, it was brighter than my old florescent with 2 bulbs. Highly recommend.
Phipfaye
2025-08-16 15:31:39
This is a clean looking bright white, 4000k, ceiling light used to replace an old 4 foot fluorescent. I had hoped to find an adjustable color ceiling light (3000 - 5000), but this is a good option. Easy to install.
Julie Dixon
2025-07-18 13:52:46
This was installed over my kitchen sink. It is a brighter light than tube lights. Lightweight and easy to install! I just hope it lasts as long as the tube light fixture!
Dad, the engineer
2025-06-26 17:00:16
The issue that I was dealing with, was that the 4' fluorescent fixtures in my primary bedroom closets were having bulb and/or ballast issues. Why not replace the fixtures with something more efficient anyway? I was already familiar with Lithonia Lighting, as I've purchased some of their lighting products in the past, so it seemed like the Lithonia Lighting FMLWL 48 840 LED Flush Mount Wraparound Light (4-Foot, 4000k, Bright White) would be a decent choice.When I was taking down the old light fixtures, I noticed an issue... no J-boxes. Instead, Romex was poking through a hole in the sheetrock. Ugh. At least a ground wire was coming through, too, though it's a bad thing when that's the kind of thing that makes you happy. Did I mention that I was wall-mounting these? Because the Romex was coming through holes drilled in the framing over the closet door, there wasn't a quick or easy way to add a J-box in the same spot. I opted instead to go with a flush mount. There's a small, circular knock-out on the back of the light fixture, so I cut a grommet for that hole, pulled the white/black/green fixture wires back into the housing, and hooked everything up. It works, but there are issues. It appears that Lithonia Lighting just took an existing fluorescent housing, glued in a DC power adapter, and put in a 5050 light strip. Theoretically this makes this light easy to repair or modify, if that's your thing. Aside from the massive amount of wasted space, and shockingly high BOM cost vs. retail price markup, the location of the light strip makes it difficult to hide the wiring in a non-traditional installation like mine. Everything is downlight from the strip. Is that Lithonia Lighting's problem? Maybe not, but it's logical to assume that you might be able to use that massive housing for something.As far as the light goes, it's pretty good for the 8'x8' closets. Decent CRI, brightness, and diffusion (you don't see distinct hotspots where the surface-mount LEDs are). Aesthetically, you could best describe these as industrially functional. The housings look cheap, but the diffuser looks pretty good. I'm a little torn when it comes to the VALUE of these fixtures. On the one hand, ~$50 per fixture isn't bad... and I do expect them to last for several years. On the other hand, these seem pretty expensive for what you get. Recommended
Miles
2025-06-24 12:47:34
The media could not be loaded.
Frank Nguyen
2025-06-22 14:50:11
verry simple to mount, light weigh, large candel power, strong recommended
Sandy Scott
2025-05-23 11:57:39
Very easy install, and emits a great amount of light with cost saving LED lighting rather than the more expensive to use florescent light fixture that it replaced. Also, it is much thinner and hence is less intrusive looking.
LizArt
2025-04-19 16:27:34
I know enough about electrical connections to safely take this on. It was easy peasy. The hardest part was twisting my torso to screw in the screws holding the light to the cabinet LOL. I did use my old screws and electrical caps, because the screws provided were a tad too long and poked through the bottom of my cabinet. But other than that, I am very happy with my much brighter light (it replaced a 20 year old neon light).
Customer
2025-03-29 12:00:35
Easy to install and it works brilliantly. Love it.
Norquay
2025-03-26 11:04:20
The moment I turned on the power the driver for this light exploded internally. I hooked it up to 120v AC at 60Hz as it is intended to be.
Customer
2025-01-25 15:44:24
Have had this lights for a while now. Easy to install and provides strong light for my garage! A little pricey for the quality of product but a decent value.
Humbert the Wise
2025-01-24 14:58:50
direct replacement of similar water-damaged fixture. Should last at least another decade barring a natural disaster.
Michel Rochon
2025-01-19 15:52:15
Had to replace old fashion fluorescent lights that were always burnt, flashing, etc and the changing of fluorescent tubes was a pain. Replaced all 4 with these , very easy install, very light and very good price compared to others at the nearest hardware store. No more tubes to changes and the garage has never been so bright
Recommended Products
