Your cart is empty.
Your cart is empty.Marla S. O'Donnell
2025-08-31 10:49:07
When I ordered this cabinet, I just assumed it would be low price and therefore low quality cabinet. The product was well packaged with no damage. The biggest surprise was that all the holes lined up for assembly. Assembly in general was easy and straight forward. The quality was better than expected. I would highly recommend this metal cabinet. In my case, I am mounted two of them above my 46" toolbox in the garage.
Abigail
2025-08-18 20:38:31
This cabinet is a cheaper solution compared to big box store prices. The thickness of the metal reflects that, but the finish is quality. Do yourself a favor off the bat and go buy some 1/4-20 x 1/2†button head screws. If you want black oxide screws to match the cabinet finish, you can go through McMaster Carr. I opted for some stainless screws available locally. Ditch the wing nuts for some Nylon nuts for added stability. (See pics for hardware recommendations). Connect all of the nuts and bolt loosely for the sides, top and bottom. Then add the two back plates loosely as instructed. Before tightening, add a ruler or some other thin spacer between the top of the doors and top plate. Then flip the unit upside down and tighten the side plates to the bottom plate. After these fasteners have been secured flip the unit back upright, remove your ruler (spacer) and tighten all remaining hardware. Doing this will ensure your doors stay square. Hope this helps!
Tammy
2025-08-05 10:35:27
This is deeper than other cabinets I have. I actually bought it for my kitchen to put countertop appliances on. It holds a ton! I love it! It did take a while to put it together. But all the parts were there and wants done it’s great!
Dave
2025-07-09 12:31:24
I am remodeling my workshop and ordered 3 of these units for additional storage. For the cost and sized, they were perfect!Fairly easy to assemble, although initially, some of the wholes did not line up with their mates. All I needed to do was use my awl to help align the first one the the others all fell into alignment. It appears the the manufacturer listened regarding the use of wing nuts and mine had locking nuts instead. Yay.I took a less traditional route to hang them by using cleats on the wall. This way I can easily move them to a different location should I want to reorganize again in the future.
Ambrose B.
2025-06-25 09:11:47
NOT HEAVY DUTY - OVERPRICED FOR QUILITY. I have purchased other cabinets from Amazon, for $40 less and they were better quality. I kept these but replaced most of the screws with nuts and bolts, as the screws strip almost immediately with nuts and bolts. Also note, finish is part way between Matt and Gloss making it tough to match.
Scott
2025-06-07 19:35:21
I like the cabinets, they seem good and I ended up buying 3 of them. I calculated the cost per cubic ft of several cabinets and these were among the cheapest.The only thing i didn't like was the silver bolts on the front, so i ended up buying some black m6 cap screws for the front which made them look better. That said, it was cheap and purely asthetic.
Veronica Fuhrman
2025-01-24 15:56:17
It took us 6 hours to assemble. Then when we came to the doors, we found we were shorted a top hinge for the door so we can't use the doors.
Alyce R.
2024-12-31 17:22:17
The title says it all. Just what I needed. Highly recommend.
Recommended Products