Your cart is empty.
Your cart is empty.Product Description
Ceramic Fiber Blankets
High temperature stability: Ceramic fiber insulation blanket withstands direct flame, continuous use at 2200 ℉, intermittent use at 2400 ℉. Above 2400 ℉ it will begin to shrink, become brittle and eventually melt at 3200 ℉.
Thermal conductivity: The R-value is approximately 2.5 per inch. For a 1000 ℉ hot face with 1" of insulation, expect the cold face of the insulation to be 220 ℉.
Installation: Mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone.
Quality: Made from premium 8lb density ceramic fiber that has high insulating value, strength & durability. Made in the USA.
Chemical composition: 46% alumina, 54% silica and less than 1% impurities.
Uses: Fireplace insert insulation, baffle blankets, wood stove insulation, kiln insulation, blacksmith forge, pizza ovens, brazing, soldering blanket, welding, pellet stove, chimney lining, furnace insulation, boiler, foundries, refractory wool , glass blowing, jewelry making, fireproof doors, fireplace insulation, muffler packing.
Comparable to: Kaowool, Inswool, Durablanket, Cerablanket, TaoFiber, Fiberfrax, Ceramic Wool
TechReview
2025-09-01 15:18:05
This is almost a miracle product, it makes many impossible light weight high temperature projects possible...great quality...
Customer
2025-08-28 10:54:58
I used this for a permanent install of a Disel heater I wrapped it around the exhaust and put inside a 3 inch double wall stove to exit an external wall it seems to really work well to keep the heat away from everything the product was easy to work with and has directions of all precautions to take when working with the product the mat quality seem to be decent and the durability made it easy to work with
jcowdough
2025-07-31 18:09:12
The media could not be loaded.
Michael Alzamora
2025-07-11 11:33:00
Easy ti cut and put in position
JN
2025-06-22 12:37:13
I used this to make my dishwasher more quiet. I simply shoved it under the dishwasher, all around the wash and discharge pumps. No need to worry about heat or electrical as this is a ceramic fibre material. It’s heavy and dense. I put the access panel back on and started a load of dishes. Voilà ! Peace and quiet now. Kinda expensive but, worth it. There’s no real install directions. You just figure out your application. It’s not rocket science.
Steve H.
2025-06-12 16:21:42
I shopped at 3 fireplace stores and several home improvement places and could only get this blanket as special order and quite expensive. This was just what I needed, reasonably priced and easily cut to fit. Will get it again when I need to replace it…….. in 10 years.
Mike Upstate NY
2025-04-05 18:16:04
East to work with and fire proof
DRB
2025-03-18 15:41:06
Cut to fit my kiln doors for Borosilicate glass blowing. Kiln runs at 1050*
P.Andrews
2025-02-28 20:59:25
We have a woodstove with baffles and the piece that came with stove was worn and not as good quality as this ! Most affordable we could find !!
Lynda Simard
2025-02-24 15:44:54
tRÈS BON PRODUIT
C. S.
2024-12-19 12:47:59
Used to insulate around wood stove pipe going through wall. Pipe is insulated, but wanted extra protection. Seems to be quality product.
john harker
2024-12-05 14:30:11
for less than $100. use it for insulation on my smoker in cold weather awesomeMuch less than what the mfg wanted for a insulation cover ($450.00)
Recommended Products