Your cart is empty.
Your cart is empty.Re-fill standard paintball tanks for 12oz, 16oz, 20oz, 24oz, etc. W/ease. MAddog paintball Co2 fill station, Co2 dual valve bottle refill station offers 2 quick release valves prevent fumbling around or over filling. Heavy duty, durable construction, compatible with all standard Co2 paintball tanks on the market. Save time, fill from home.
R. S. Winsor
2025-07-27 12:25:06
This works nicely and is made pretty well, no leaks unless the CO2 chills it too much - the valves are not rated for such cold (and the price would be far higher if they were). Gladly, if you follow the right procedure, that's not a problem. I have seen videos posted that describe how to use one of these, and I don't agree with them in some ways. Here are some tips I recommend:Fully empty the bottle before refilling - and I mean *completely*. No residual pressure in the tank whatsoever.After completely empty, place bottle in the freezer for a couple hours.Refill the tank as rapidly as possible after removing from the freezer. This chills the CO2 entering the tank, and helps it pull more CO2 from the feeder tank.With these tips, I am able to load a 12oz tank fully without the need for bleeding some gas - and it conserves CO2.
wyatt boche
2025-07-07 09:31:59
Works great for refill 20 ounce tanks.
B
2025-06-18 12:47:20
Like the product first one leaked pretty good so was sent a replacement pretty quickly. The second one leaks a little still but better than the first
NIN
2025-06-04 09:50:20
Simple to use and worked great. No complaints
Tom Rossi
2025-04-10 21:39:50
Works great!!
SAUL Q.
2025-04-09 18:52:27
It is easy to use and pretty straight forward. Wend out for a weekend (two days) of woods paintball and it worked great. Easy knob to refill. Just be careful with your plastic o-rings (gaskets), they do fit a little loose in the valve and once you take the valve off, they might come off easy, which are prone to get lost easy. Other than that, it is a great product in my view.
JG
2025-03-13 11:53:56
Product is great and easy to use, but unfortunately I've had two leak on me within 3 months - one immediately on first use. Haven't found any better alternatives, I think the parts aren't rated well for the CO2 temperatures?
Donald F. Miller
2025-01-26 13:23:45
The system works well and is easy to use. But the connector to the bottle being filled is plastic and seems to be a bit flimsy. I'll keep it and use it. But, I will followup on this review if I have a failure.
Customer
2025-01-10 16:55:15
This fill station is absolute garbage. The one I received is leaking from 3 of the joints and the inside valve is actually leaking from the body of the valve. I’m not impressed at all with this item.
Recommended Products
