Your cart is empty.
Your cart is empty.Product Description
Quick, Threadlocked Installation
Secure your drill bit holder on the impact driver or drill in no time. Installation screw with threadlock included.
Bits Anchored by Neodymium magnets
Forget about losing your Milwaukee bits, and focus on the project at hand. Effortlessly snaps in place, no friction to wrestle.
Firm-Grip Magnetic Surface for Screws
The magnetic side keep your next screw primed and ready to use.
James
2025-08-24 16:58:30
I could have gone with a 3D printed version, and I debated it. But for the price, you should go with the injection molded version. It feels much more premium and is super sturdy. The magnets are super strong and it installed perfectly onto my hex driver. The rubber surface is also great for holding the random couple screws you need in a pinch. 10/10 would buy again and probably will.
Jason Derringer
2025-08-16 13:16:44
I absolutely love how the colors match the tool perfectly! All the magnets for the retention are very strong and I have seen no issues with anything falling out. I haven't thoroughly tested the outer magnet for screws and such but it seems pretty strong. The only problem I had was the included mounting screw. It seems to be either the wrong length, off by maybe a millimeter, or it's not exactly the right thread. It either bottomed out or bound up and the head snapped off. A perfect fit is 6/32 thread and 1/2 inch in length. Maybe my specific driver had a more shallow hole, I really don't know but with the new screw, works awesome!
Customer
2025-08-12 15:42:45
The bit holder was a great fit to my m18 fuel driver the magnets are strong and the bits don't move or get lose from the holder when in use I have been a carpenter for over 40 years and supervisor of construction crews and this is the best I've found for convenience and ease ability to use I would approve this to all, great product.
Made for a child?
2025-07-31 16:15:23
I still have it on my drill 2 years later. One magnet fell out. Sometimes bits fall out. Make sure to use locktight on the screw. Overall pretty good product
Customer
2025-07-19 14:31:54
This accessory is pretty neat. It holds several bits to avoid wasting time searching for the right one, without taking up too much space. The M12 impact is a small, lightweight tool that I keep on me all day for most tasks, and this device maximizes its efficiency. There is a magnet that can hold a few screws. It’s not super strong, but can hold 4-5 drywall screws to get a sheet started. Some small bits, like the T-20 and drywall bit, can be challenging to remove, and occasionally the holder gets in the way in tight spaces, but those are the only downsides. It’s easy to install and remove. I also have an M12 hammer drill; it looks like this would fit on that as well if you shave off the small tab at the top of the back, but maybe there is a better option for that drill. Overall, very happy with it after 6 months.
steve fuller
2025-07-11 11:00:49
I definitely consider this an upgrade to my impact as well as my hammer drill. I’ve got a combo of this unit on one side then the magnetic bit holder (also from Simon tools) on the other side. Super useful combination, six bits should cover most things I encounter on the one side, then screws and drill bits on the other side (see pic). The plastic construction on the unit is pretty tough with a rubberized magnetic section (magnet is little weak). The rubber magnetic patch will hold a number of loose screws as well. The magnets in the slots are very strong, no worries about tips coming out. I really love not having to grab a box of tips when I need my drill for something. I keep a couple of adapters, Phillips, and a torx bit in there.. maybe a slotted.It’s become one of those tools you can’t imagine not having. Just an extension of the drill. I read where someone wrote that the drill becomes top heavy. I haven’t had that issue myself and I thought I would. The drills having remained fairly balanced. Full disclosure I am using the larger bottom batteries, 3.0 and higher I believe.. that helps balance the drill.I’m a new fan of Simon Tools!
FL Buyer
2025-06-22 16:57:19
Functionality, size, quality are top notch. The attachment screw was too large for my Fuel Surge driver. Went with a much smaller screw with a washer.
Dan Lion Palazzolo
2025-06-21 21:05:06
Very good attachment to the M12 Surge impact driver I got. It serves good utility and completes the impact driver. Very satisfied. Thanks to seller for providing such an excellent product.
Vanz
2025-06-12 12:53:04
Fits like a glove and very handy.
Julio C.
2025-06-08 11:57:52
Es el mejor portador de puntas del mercado. Vale cada centavo! Sin duda esta fue una muy buena compra. Los imanes son muy buenos, facilita y agiliza el trabajo 10 de 10
Misty
2025-04-18 18:40:27
Excellent quality bit holder for GEN 2 Milwaukee M12 impact driver, holds 3-25mm bits and 3-50mm bits .Fits on the Driver like it belongs there.Saves time looking for bits, bits hold firm with the magnetic holders.Takes a little longer to arrive coming from the US.Many thanks 😊.
玲ç“ãŸã‚‹ãŠãµã¨ã‚“
2025-03-17 15:38:04
ã“ã¡ã‚‰ã¯è²«é€šå¼3本ã®ãƒ›ãƒ«ãƒ€ãƒ¼ã§ã¯ãªãã€éžè²«é€šå¼ã®6本ホルダーã§ã™ã€‚ãªã®ã§ç‰‡é ビットãŒãƒ™ã‚¹ãƒˆã€‚ãã—ã¦å……電ドリルã®å ´åˆã¯weraã®ãƒ©ãƒ”ッドアダプターを併用ã™ã‚‹äº‹ã§ã€ã‹ãªã‚Šã‚¹ãƒžãƒ¼ãƒˆãªåŽã¾ã‚Šã«ãªã‚Šã¾ã™ã€‚ベストãªé•·ã•ã¯ãƒªã‚¢ã¯30mmã€ãƒ•ãƒãƒ³ãƒˆã¯50mmã§ã™ã€‚逆ã«é•·ã„ビットやドリルç‰ã¯å¾Œã‚ã«é£›ã³å‡ºãŸã‚Šã€é‡ã•ã§è½ä¸‹ã®å±é™ºãŒã‚ã‚Šã¾ã™ã€‚ドリル以外ã®ãƒ“ットをメインã§ä½¿ã†ã®ã§ã‚ã‚Œã°ã€æ˜¯éžweraã®ãƒ©ãƒ”ッドアダプターã¨ä½µç”¨ã—ã¦ä½¿ç”¨ã™ã‚‹äº‹ã‚’オススメã—ã¾ã™ã€‚ドリルメインãªã‚‰ã“ã¡ã‚‰ã®å“ã¯ä¸å‘ãã§ã™ã€‚
Fernando Cesar
2025-01-09 10:28:13
Cumple con lo que promete, de buen material, ya habÃa intentado con otros productos y este es el mejor, estoy muy satisfecho
Recommended Products