Your cart is empty.
Your cart is empty.Plenty of room for sleep and play? Now that’s a win-win! The Max & Lily Twin Over Full Bunk Bed is the perfect combination of functional and fun that both kids and parents love. Top bunk features tall 14” guardrails, so the bed safely fits standard mattress sizes. Angled ladder with rounded edges offers comfortable, easy climbing. Added bonus - ladder is both reversible and removable, so it is flexible to work with any space. Solid, knot-free New Zealand pine wood adds strength and stability. All Max & Lily products use a durable, low VOC finish. The slatted head and footboards and flush, color-matched hardware give this bunk bed a clean, modern look. Instructions, upper/lower slat rolls, and required hardware are included. With solid plywood slats and a metal support bar for the top bunk, each sleeping surface can support 400 pounds of resting weight. This bed meets or exceeds Federal safety standards for kids furniture. When it’s time for play, this bunk bed’s space saving design frees up plenty of floor space by stacking two sleeping surfaces. 2+ adults make assembly simple and easy. The Twin Over Full Bunk Bed from Max & Lily offers exceptional quality and affordability that kids and their parents will enjoy for years to come. Max & Lily is a member of the Maxwood family of brands - the kids furniture experts bringing a tradition of superior quality, safety and fun!
Sabrina Zimmerman
2025-08-16 11:14:17
This was a Christmas present and both boys 6 & 7 Love them. It was easy to assemble and is very sturdy. They are nice looking beds and a great buy for young, active boys. We are so happy with this purchase.
Customer
2025-07-23 12:21:28
I was very pleased with the look and feel of this bed. It went together easily and doesn’t shale when someone gets on the top bunk. The black color I ordered looks really nice and not lile a kids bunk bed.Very excited to have this.
J McAfee
2025-07-20 12:51:41
My review addresses the quality of construction, and how to remedy the flaws.I would not install this in a rental property; get a metal frame bunk bed instead. OK at home or a vacation home.This is made from New Zealand pine. A good solid wood with few cosmetic flaws. The wood is brittle, which contributes to the structural failures described by reviewers. Very nice finish but with some odor that takes a few weeks to dissipate. It is NOT toxic, as claimed by some reviewers.I purchased the full over full, with twin trundle.First, the assembly takes a good amount of time, 6-8 hours minimum to do a good job, without the modifications described below.Second, the assembled bunks were very solid without any play (unlike other reviewers). You MUST fully and firmly screw in the hardware to achieve the rigidity. The head of the hex head screws sits below the level of wood. Some fasteners required quite a bit of torque to fully engage, ultimately twisting the metal of the supplied hex-wrench. Be meticulous, but be sure to not over-tighten.The trundle construction quality is crap. Far weaker construction with inferior doweled joints in comparison to the bunk.Now about the flaws. Reviewers describe 2 major failure points:1. Fracture of the slats under the mattress.2. Fracture of the longitudinal frame rail across the lower bunk.Here is how I addressed these failure points:1. I added 6 1x4 tight knot pine slats between the supplied slats. Add these before screwing down the supplied slats. I think 1x3 would be fine or preferable, but my lumber yard doesn't stock this dimension. I stapled the slats to the strap interconnecting the supplied straps, but did not screw them to the side rails to allow a bit of flexion. This looks and feels REALLY solid.2. I added to the longitudinal front side frame rail a zinc plated steel flat plate 1" wide, 1/8" thick, 72" long purchased at Lowes. I didn't add this to the back side rail since the weight causing the failure will be on the front side. Be sure to leave a gap between the slats and the frame rail to accommodate insertion of the flat plate. Attach to the side rails with 12 round head wood screws, #10, 3/4" long. Drill 7/32" holes in the steel flat plate, 1/8 " in the wood rail. Prior to attaching the flat plate, the side rail had a subtle but real deflection with my weight; I can understand why this would fail. After attachment of the flat plate, I could detect zero deflection, solid as a rock.3. The trundle is hopeless. I glued the dowels and added slats to the mattress support. If it lasts a year I'll be thrilled.
Liz G
2025-07-12 11:14:25
A friend and I assembled the Max and Lily double bunk and two triple bunks, all of which are identical in their part numbers and assembly process. The double bunk was top quality and easy to assemble, but the triples, although clearly the same in their parts and assembly, were not nearly the same quality, so beware the newer version of the double bunk may not be as high quality as the one I received. The directions are easy to follow if you pay close attention to detail. However, we assembled them in a different order so that we weren't trying to lift a completed bed into the air while fitting the legs onto the metal rods that connect it to the lower bunk. Instead, we assembled the top bunk in its place, on top of the lower bunk. We started by assembling all of the headboards/footboards. Each bunk is slightly different, so be sure to keep the pairs together. Then we connected the bottom bunk head and foot boards with the 2 long boards that hold the slats. We pushed the bolts in all the way to help hold up the long boards, then pulled the bolts out one at a time to screw them into the nut, using an impact driver. We fully tightened every bolt at each step. We stopped there, skipped some pages, and inserted the 5" metal rods into the tops of the legs, and put the top bunk's head and foot boards on those metal rods, on top of the bottom bunk. Then we attached both back guard rails at the same time by first hammering the dowels into the head/footboards with a rubber mallet and then guiding the holes in the ends of the boards onto the dowels sticking out. Then we attached the boards that hold up the slats, again pushing in all of the bolts to help hold it in place while we removed one at a time to screw the bolt into the nut. Then we attached the steel bar on the top bunk. Then the slats. Then the front guard rails. And finally the ladder. The double bunk took us 3.5 hours because we took our time to fully understand the directions and to sort all of the nuts and bolts into different bowls. I highly recommend using an impact driver--you can see in the pictures how tight we got the bolts. The beds are sturdy and beautiful. I bought 6' foam pipe covers and cut them in half lengthwise and duct taped them to the underside of the steel bar to keep the children from bumping their heads. I paid more for the Max and Lily bunk mattresses and glad I did--they are high quality and a perfect fit. Can't wait for my grandkids to come visit!
Es
2025-07-05 11:25:30
great product! well made , easy to assemble.They should add a few extra screws in case one gets lost, or comes deformed as in my case.
Moh
2025-06-29 15:29:35
It look my husband and I about 2 hours to put together. The instructions were easy to follow and the pieces came in great condition. We like the attention to detail with the grey painted screws to blend with the wood and even little wood pieces to fill the holes on the top bunk that would otherwise be open depending on which side you put the ladder (see picture). Overall great quality!
Mire
2025-06-28 18:24:05
Very nice bed, good quality, I had a great experience with the seller: delivery was fast, seller was very responsive to my inquiries, very helpful overall. The seller will send you the upgraded version on the bed, the one with more slats.
AThoughtfulMama
2025-05-30 16:20:06
High quality solid wood bed, with a gorgeous finish. Went together very quickly - except for the fact that 8 wooden dowel pegs DID NOT come with it, and they were needed to put the side rails on the top bunk. We were able to find a substitute at a nearby hardware store, but tack on 45 minutes for the shopping trip plus extra money for the parts... you can see why only 4 stars.Plus, although the majority of the bed is extremely sturdy, fastened with bolts, etc., the side rails for the top bunk are only connected with wooden pegs, and the only thing holding the headboards/footboard together along the sides are 4 bolts (one on each side, 2 top, 2 bottom). Not sure how solid the construction would be if you had these each as standalone beds (which it is advertised you can do), as I would think with constant getting in/out of bed there would be some rocking that would shift the head/footboard.All-in-all a fine purchase for our needs, especially placed in the corner of the room, and where others bunks we have purchased (2) are definitely sturdier/have more bolts for strength, this one has way better wood/finish. Also thoughtful that they provide wood veneer stickers to cover all bolt holes, if the look of the open holes/hardware bothers you (we're trying them out for now).
Omar
2025-05-18 14:48:17
The bed frame actually surpassed my expectations. First, I got the bed delivered way faster than the expected date. Second, the frame wasn’t that hard to install (no parts were missing and the instructions were clear). Third, I really like the circular stickers they supply to hide the bolts.My kids are loving their new bunk bed.
Donna-Lynn Campbell
2025-02-25 15:23:29
It arrived quickly, easy to assemble, sturdy, nice product
Louis-Carol Lévesque
2025-02-17 11:01:58
Produit de bonne qualité, le bois est solide et avec une belle finition. Le montage est facile, finalisé en moins de deux heures seul. Seul petit bémol, le bois est solide mais s'endommage quand même facilement. Avec des enfants, les surfaces ne resteront pas lisse longtemps . Mais, malgré tout, de façon structurellement, il reste solide.
Recommended Products
