Shopping Cart

Your cart is empty.

Your cart is empty.

MECCANIXITY Bonded Sealing Washers M8 13.5x8x2mm Carbon Steel Nitrile Rubber Gasket, Pack of 10

Free shipping on orders over $29.99

$5.69

$ 1 .99 $1.99

In Stock

1.Size:13.5x8x2mm


2.:10


About this item

  • The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal
  • Materials: Carbon Steel; Nitrile Butadiene Rubber: Hardness: 60A; Working Temperature Range: -20°C to 100°C (-4°F to 212°F)
  • Fit for Size: M8; Outer Diameter: 13.5mm; Inner Diameter: 8mm; Thickness: 2mm
  • Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings
  • The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines


What will I get?
Color: Black, Bronze
Material: Carbon Steel, Nitrile Butadiene Rubber
Fit for Size: M8
Outer Diameter: 13.5mm
Inner Diameter: 8mm
Thickness: 2mm
Rubber Hardness: 60A
Rubber Working Temperature Range: -20°C to 100°C (-4°F to 212°F)
Package Contents: 10 x Bonded Seals
What is this?
A bonded seal is a type of washer used to provide a seal around a screw or bolt. Consists of an outer annular ring of carbon steel and an inner annular ring of nitrile butadiene rubber that acts as a gasket.

Are there any advantages of the product?

The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal.
Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings.
How to use it?
The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines.


Aaron
2025-08-03 10:29:42
Works great on my magnetic drain plug in my ram 1500
Chuck P.
2025-06-07 15:25:17
Used these to seal banjo bolts for a injection pump on a old diesel tractor. Worked very well and sealed the air leaks
Gary Wase
2025-06-03 10:00:20
Size is correct, sealed good.
Customer
2025-05-25 11:26:18
Used this gasket on a M14x1.5 outlet fitting on an oil transfer pump. The gaskets sealed perfectly. The pump only produces 30psi, but this seal worked well in this application. I have no doubt that it would work well at higher pressures also.
Customer
2025-05-13 10:47:17
Using these sealing washers on 1973 Fiat brake lines. Very good seal for banjo bolt.
Wendell
2025-04-23 17:28:08
That the part I got was correct it was not, part in box was not what was advertised
Sawdust
2025-02-13 21:21:55
These were exactly the same bonded washers used in my central hydraulic tire skates.
David F. Branson, AZ
2025-01-28 13:07:17
Got just what I ordered, these were 10mm and sealed great.