Your cart is empty.
Your cart is empty.Product Description
Tips before printing:
- The ink to be used is preferably pigment ink, You can use sublimation ink, but the pictures printed out are not bright in color than the pictures printed out with pigment ink.
- The size of the heat transfer paper is 8.5x11 inch, please set the size of the paper to 8.5x11 inch before printing.
- If you want to confirm the printable side of the heat transfer paper, just peel a small part of corner to confirm. This can avoid the problem of peeling caused by uneven paper after printing.
- If the picture printed on the paper has obvious streaks and indentations, please check your printer or ink.
Use heat transfer machine transfer steps.
Step 1
- Print the the image on front side of heat transfer paper (the smooth and soft side is the front side);
- After printing, allow the paper to dry.
Step 2
- Cut the paper into the shape you want, be careful not to leave out white edges.
Step 3
- If you want to use a heat press, first close down the heat press, adjust the pressure to a suitable state. Recommended Time: 15 seconds;
- Temperature: 329°F ~ 338°F (165°C ~ 170°C).
- Finally When the time and temperature reach the value you set, you can transfer the paper.
Step 4
- After the ironing is complete, Please remove the separator paper without cooling.
- For any questions, please see the detailed instruction videos on the product page.
Step 1
- Print the the image on front side of heat transfer paper (the smooth and soft side is the front side);
- After printing, allow the paper to dry.
Step 2
- Cut the paper into the shape you want, be careful not to leave out white edges.
Step 3
- If you use an iron,Make sure your iron doesn't have any water in it and the steam setting is off; Then set the iron to high or cotton setting.
- After the iron is heated to high temperature, transferring process is started, please apply firm pressure evenly about 2-3 minutes.
- (Every corner needs to be stressed evenly) After the ironing is complete, Please remove the separator paper without cooling.
Step 4
- Lay the garment on a hard, heat resistant surface and iron any wrinkles.
- Peel the back side of the paper, place the printed side face up on garment; Please make sure the paper is flat on the garment, cover the image with provided separator paper.
- For any questions, please see the detailed instruction videos on the product page.
Charles Sto
August 19, 2025
This product is a nice quality. I wouldn't use it to market Tshirts, it would probably hold up well on children tees, considering they don't really care about feel. Unless the parents do. I would use it for that purpose. What I would really recommend it for is tote bag and backpacks, you know something you won't have to wash as often. That's why I'm keeping it. When you receive it open it up and let the.pages air.out, they have a strong smell. Happy Crafting
Pamela Harvey
June 16, 2025
I received the product yesterday, I had several shirts to do, but did couldn't sublimate them due to the fabric. So I tried the transfer paper. beautiful. Bright, easy to work with. The end result made me and my client extremely happy. I will order again.
Moni
June 6, 2025
This was the best product thus far that I’ve used. Great quality as far as wash instructions it does fade after awhile
RogerR2
April 27, 2025
If you have not used Heat Transfer Paper before, there is a learning curve. The included instructions are a bit confusing regarding flipping the image. In the design phase it says to flip the image. In the next print phase it says to flip the image. I don’t understand why it should be flipped and then flipped again. This print is on a surface that is separated from the paper backing before it is placed on the garment print side up, so It should not be mirrored.This paper is labeled on the back as ‘Vision Transfer paper’ which was unexpected as I was expecting it to say Mecolour..Print using an Inkjet printer, then cut out the design, I used a heat press temp of 335 degrees F for 15 seconds. Carefully remove the print from the paper backing and place it face-up on the fabric. Before placing it on the fabric, iron the fabric to remove wrinkles and to make sure it is dry.The included picture is the print placed on a canvas bag using Mecolour paper. I used Cricut design space to create the image, and the Cricut to print and cutout the design. As you can see it produces a print that is very good and it adheres to the material very nicely. I prepared this print for a friend and the final print was on a cotton sweatshirt. When I get feedback on its durability, I’ll add to this review.Since this was my first time using this technique to place images on cotton, I had a few errors before figuring out the correct procedure. That being said, I would use this Mecolour paper again.
Wanda
April 20, 2025
Works great . Good color easy to peal from the paper the t shirts I did came out great
Khalini's Krafts, LLC
March 7, 2025
I have had a pack of MECOLOUR HTV paper for Dark Fabric for a while and didn't use it until recently. I didn't realize how easy it was to use! You now have a new customer for life. I have recommended it to my fellow crafters.
Raushanah Davis
February 18, 2025
I love this paper. It's great quality. Prints well and peels easy. I will definitely be buying again
dwayne chism
February 2, 2025
I've been doing custom shirts for 10yrs. and have never printed paper that would not transfer to a shirt. I printed 12 sheets and not one would transfer to my shirts. What a waste of time and money. My first and last time using this paper. Beware
Recommended Products