Your cart is empty.
Your cart is empty.Meguiarss Mirror Glaze M02 Fine-Cut Cleaner is a mildly abrasive cleaner that removes fine surface defects including light oxidation, stains, scratches, swirls and fresh water spots. Our special formula of buffered abrasives turns into a gentle buffing rouge, giving you a professional finish that’s ready for polishing and protecting. Buffered abrasive action lubricates the finish to prevent scouring. This professional cleaner also leaves a silicone-free surface essential for proper painting in a body shop environment. Safe and effective on all glossy paint finishes including clear coats, and ideal for older lacquer and enamel paints.
Larry Adkins
September 3, 2025
I have a 2017 Ford Explorer (black) and I had a ton of paint chips from gravel trucks, etc. on the highway. Well under the black, it's white so I got a touch up paint kit that did a great job of hiding the blemishes. Unfortunately, when I sanded the paint down it left swirls and it was very hazy. I tried some of Meguiars other products to smooth it out but none of them worked so I saw this product and gave it a try. I first just tried to muscle it with my hands but I just go tired and the swirls never really went away. I then tried a plug in polisher that I got from HB and after about a minute of working the product in and then buffing it off, it was good as new. So, for me, this stuff worked as advertised but I would add that you really need a power polisher to get the results that are promised on the bottle. I realize it all depends on the extent of the swirls so take this review for what it is -- just my experience, your mileage may vary.
michael b.
August 23, 2025
I am not very experienced in using a polisher but this stuff was easy with fantastic results. I have a black vehicle that's 25 years old with the original paint and it had many scratches and swirl marks mainly on the hood. I di use Meguires polishing compound first but couldn't quite get rid of the swirl marks. Rather than paying hundreds of dollars to a professional detailer I thought I would give this a try. I like doing things myself and when it comes out good it's very rewarding. So I used this on a foam wheel and went over it two times, it removed nearly all of the scratches, ALL of the swirl marks and made that black paint richer and deeper.This stuff is the best I have ever used over the years, I would highly recommend it.
Customer
August 19, 2025
This product works well enough to bring back the dull paint to a nice shine
Doug
August 1, 2025
It did a great job removing haze and swirl left when I used polishing compound, this is on a gloss black car surface.
Matt
July 13, 2025
This is great stuff! It takes out swirl marks on a painted area that maybe a bad spot. Matches to the rest of the paint once you buff it out.
Colleen Grotke
June 3, 2025
I'm trial and error learning to do minor automotive painting. This polish worked well for me. It was reasonably priced and allowed for a significant area (about 20 sq ft) to be initially buffed. I didn't have any trouble with burning thru the new paint.
Mike Lutz
April 11, 2025
Exactly as described
M. Burton
February 12, 2025
This is an old school compound- that's about the best way to describe this. If you keep that in mind (that it's a compound from the old ways) then it will be an "OK" compound but if you start comparing it to the newer compounds by Meguiars, 3M or Wizards etc., it will pale in comparison. Many of the newer compounds are "time released" for a one step process (or darn close to) or they are a "One compound process" in that you use the same compound on the heavy cut pad and the medium cut and the finishing pad. Many of the newer compounds are also thicker so the pad can't sling it around as easily and it doesn't evaporate as quickly.Meguiar's Medium-Cut is a liquid grit compound (you can feel the grit between your fingers) that uses some type of oil (for lubrication?) and is pretty thin as compounds go. I had real troubles with the compound slinging all over the place with both wool and foam pads leaving little on the pad. As other reviews have said, It also dried too fast though I didn't have any troubles removing it as some others had. This product will require a second step with dedicated pads for each product. The finish it leaves is indicative of a step 1 product in a 3 step process. You will also need to have a sponge, bucket and towels on hand because it's going to sling that liquid grit all over and if you just wipe it off you may risk marring another surface.So there you have it. If you like doing things the old way (because you were taught that way or you did it that way for XX years) then this stuff will work out great for you and it is capable of delivering the same great results as the newer products. However, if you are new to compounding/polishing, want to save time and/or money than look into the newer products like Meguiars 105 and 205, 3M Perfect It series or Wizards Mystic series or their Turbo Cut and Finish cut.
Jos
January 10, 2025
Quita rayones considerables, asi como los famosos rayones de telaraña, deja el auto con un brillo por semanas, muy buen producto, en mi caso esté nivel de pulido fue bueno aunque en maximo debe ser una maravilla
Mario Gómez
December 29, 2024
Quito rallones y deja un brillo en el coche exelente
Blair S.
December 18, 2024
Restringing guitars can leave minor scratches on headstock faceplate. This stuff takes care of that issue.
علي م.
December 3, 2024
استمروا بارك الله Ùيكم ðŸ˜
angel rodriguez fernandez
November 28, 2024
Me gustó mucho deja muy bien el acabado de la pintura de mi coche le quitó manchas de agua y rayones leves lo dejo muy bonito acabado y se ve más nueva la pintura
Recommended Products
