Your cart is empty.
Your cart is empty.Pair of speaker adapter plates for select 2000 and up Nissan|Infiniti vehicles allows for the installation of 6 inch to 6.75 inch speakers into factory speaker location. Works in both front and rear speaker locations. Heavy duty ABS plastic construction ensures a long lasting secure fit. Color Black
kubota fan
2025-08-19 15:57:43
worked well with my new speakers.
Randi Gutierrez
2025-06-17 16:37:24
This made my installation product so fast and easy!!!
Gerald J
2025-06-08 11:49:20
The media could not be loaded.
Gavin ball
2025-05-08 17:02:15
Perfect fit on 2015 Nissan frontier
Channing K
2025-04-24 15:31:13
Made for a really clean factory fit and install. Just had to spin the adapter around till the holes for the speakers would end up being in the correct placement. Even, though being being the door cover. Not going to see if the speakers aren't straight. But, I like to take the time to make things look correct. Then, I marked a spot to run the metra harness adapter. Drilled with a 3/8 drill. Able to run the harness wires close to the factory location. Really impressed by their products. Made for factory like easy install.
Anona
2025-04-11 10:55:07
Recently bought a new 2023 Kia Niro EV, the HEV and PHEV all have the same basic body chassis and sizing. The stock audio system is pretty dismal if you don't end up getting the premium Hardon Kardon system. The front doors have 6.5" inch woofers with separate tweeters, the rear door have slightly smaller than 6.5" inch, but can fit 6.5" with a different modified speaker adapter.The Niro uses three screws in their speaker bracket, the stock speaker bracket is also raised off the mounting surface just like this one to give you a little more depth. The front doors are a bit shallow with the windows down they do partially encroach into the speaker space so you definitely want to measure and go with shallow mount speakers or magnets and spider baskets that aren't too wide. There's also door molding parts that encroach into the speaker opening preventing large woofers from fitting.The three mounting brackets tabs on the adapter are in the correct place but the depth where the screws fit is off, so you have to drill the the tabs so the slot is deeper and right up next to the raised ring (see pic). Do that and you're good to go. Otherwise the Metra Universal 6.5" speaker adapter should work once you break away the inner tabs, this adapter also fits the rear doors but you need to drill holes into the three divots in the ring as all the other tabs are useless. This Metra 82-7400 speaker adaptor will NOT work for the back doors as the mounting hole diameter is smaller and nothing lines up, even with modifications.
john frazzini
2025-04-07 11:54:22
Tried for about an hour using the adapter ring that came with the JBL speakers, but because they are flat they would not work. These raise the speaker up so there is plenty of room to fit in the original opening for the speaker. No screws came with these which sucks, but use #8 3/4" and they worked great.
AlexofPTC
2025-04-04 11:44:31
Worked great in my Nissan leaf 2018
Mauricio
2025-02-23 14:15:47
Se acoplan excelente a mi auto y bocinas
JACE D.
2025-02-10 21:49:59
Excelente, le quedo perfecto a una Pathfinder 2013 en las puertas traseras
Recommended Products
