Your cart is empty.
Your cart is empty.The Milton 1108 1/2" NPT Deluxe Metal Filter-Regulator Duo combines a highly-functional filter with a trusted regulator system. The filter includes an automatic overnight drain for assistance in a variety of applications. Features of the regulator include solid brass fittings and are the relieving type. The Deluxe FR Duo from Milton is a pre-assembled unit with multiple bowls and includes a gauge. Specifications are a maximum of 250 PSI, an airflow of 100 SCFM, and a 40-micron filter element.
mrpersistent11
2025-08-01 15:59:22
Worth the money, good addition to your air system, works well with RapidAir system
James
2025-07-25 11:19:57
Works great
Levi2337
2025-07-15 12:02:33
Has been in use for well over a year now and performs perfectly. Would definitely recommend.
A Person
2025-07-14 20:38:36
This was a very good, high quality unit at a very good value.One comment, the auto drain is not an auto drain... you have to discharge the air for it to work. Milton makes a float drain that is automatic but it's extra and not cheap. I got it so I never have to worry about it.... we will see if it's worth it.The other thing is that the valve is a royal pain in the butt. If you turn the unit upside down, the little valve and spring come out and you need a really long pair of needle nose pliers to get it positioned right and back in. You will not loose any pieces, they are just hard to re-seat.They really should put a c-clip on the bottom outside to deal with that.
Rodney King
2025-06-04 13:48:36
Thanks
UH-60MTP
2025-05-17 14:39:46
If you are considering buying this Milton 1108 combo regulator and filter with the expectation of getting anywhere close to 250psi working pressure, well forget about it. After installing on my Quincy compressor that has an output of 175psi I was lucky if I could get the regulator to get to118psi, and then over time it would not even hold that pressure. After talking to Cody at Milton customer service, who contacted the regulator manufacturer, Arrow Pneumatics, I was told the regulator is only able to put out approximately 120psi. I explained what the description states on the Amazon item page and he stated that Milton does not come up with that information but that the manufacturer Arrow Pneumatics comes up with that information. Cody stated that he was told there is a high pressure spring that could be procured through Arrow to retrofit the regulator to be able to get higher pressure.I contacted Arrow and spoke with Doug who told me that Milton comes up with the description of the unit and that who is responsible for the information on the item page on Amazon. Doug said that regulator will not put out more than about 120psi but he would send me a high pressure spring so I could install it to get higher pressure. This conversation was on April 24, 2023. I did not receive the spring and called Arrow back and spoke with George (because Doug went on vacation) who said he would send me out a spring and I would get a confirmation email in approximately 1/2 hour. That email never came. I emailed George back inquiring if the spring was sent and did not get a reply. I called George and left a voice mail asking about the spring and as of this time, 7:49pm on May 2 have not received a reply. Also this unit is leaking air from the factory installed brass fitting that connects the filter to the regulator. The unit is manufactured in the United States, contrary to what the information provided on the Amazon web page states, which says made in China. There are numerous other conflicting statements in the description such as below the picture of a circle with 250psi in it that says 200psi...?
R Bruce McDermid
2025-05-15 14:13:52
This is my third regulator. Replaced because of leakage. This one is good and tight, No leaks. But it has only been installed for 2 weeks so far. We will see how it does in the long term.
Chris Barter
2025-04-24 16:58:00
Device is working as advertised. Replaced a failed supposed "High End" regulator I purchased at a store known for hydraulics. Device is made of cast materials and much heavier than the device I replaced. However it's not so heavy it can't be suspended via a standard pipe off of an air compressor as this is how I mounted the device. Had to play with the drain valve to drain it - used pliers initially as the valve was impossible to move via twisting with fingers. Over all a nice regulator / water separator device.
Paul
2025-04-12 15:06:50
Good quality product that seems like it will last a very long time. Any consumable parts that need replacing you can order from Milton... Installed and pressure tested the apparatus and no leaks, set regulator to 95 PSI and it is working flawlessly.
David Marzell
2025-03-21 16:36:35
Exactly what it said
Customer
2025-02-01 09:59:15
Seems well built. Works properly.
Customer
2024-12-28 18:50:38
Great item, great price, well packaged, fast shipping.
Robert K
2024-12-12 12:33:08
great quality
Recommended Products
$73.58
$ 28 .99 $28.99