Your cart is empty.
Your cart is empty.Product Description
- The SFF-8087 to 4 SATA 7pin cable is typically used to connect the SFF-8087 Mini SAS interface on the motherboard to the SATA interface on hard disk drives, primarily used in servers and storage devices.
- This cable can expand one SFF-8087 interface into four independent SATA interfaces, allowing for the connection and data transfer of multiple hard disk drives.
- This cable is suitable for situations that require the simultaneous connection of multiple hard disk drives, such as data backup, storage expansion, or RAID array configuration in servers.
To ensure that you are purchasing the correct mini SAS SFF-8087 to 4 SATA forward breakout cable for your device
To ensure that you are purchasing the correct mini SAS SFF-8087 to 4 SATA forward breakout cable for your device, you can take the following steps:
- Refer to the specifications manual of your device to confirm the required interface type and specifications.
- Please check the product descriptions in detail, making sure the mini sas cable aligns with the specifications and interface type of your device.
- Look at user reviews and feedback to understand other people's experiences with purchasing the cable and whether it is compatible with their devices.
Mini Sas SFF-8087 to 4Sata 7pin
SFF-8087 to 4*7PIN SATA Drives
- P1 to P4 markers provide easy identification after installation
- Locking latches for guarteed connection
- Up to 6 GBPS data transfer rate per lane
Excellent welding process,Full point,good consistency.low loss
FEP environmental cover,Silver plater oxygen-free copper core,Aluminum foil shield
PET Woven cable,fire retardant,soft and wear-resistant ,the grade of flame retardant isV1,working temperature:-40℃～+150℃
JLT
2025-08-09 14:43:38
Sturdy looks nice, works well.
Steven E.
2025-07-25 12:59:58
Not much to say but it works like I expected, got 7 drives connected to 2 sas ports out of this
Xxxxxx
2025-07-16 13:09:25
Works great and cheap alternative for lab environment
shane southwood
2025-06-17 17:44:38
No issues whatsoever, buy these if shopping for sas breakout cables.
Jason Leach
2025-03-08 12:01:56
So far good product. I probably didn't need the 3 foot ones and could probably use the 18" ones, but still good and is operating in my NAS. Make sure you are getting the correct connectors for your use.
Frank
2025-01-27 17:05:41
I was having problems with my RAID , so, I ordered these cables. I installed the cables and the problem went away. I recommend these cables.
Morgan C.
2024-12-13 12:26:50
This was the exact cable I needed to connect a bunch of SATA drives to a dell H310 RAID card in a mini server. I unknowingly had a reverse-breakout cable and the drives were not mounting, but as soon as I connected this one, all drives online and responding. Also appreciated the short length of this cable, less service loops in an already cramped case.
Jeff O.
2024-11-18 21:54:45
These worked perfectly, and were much cheaper than the Adaptec branded ones. Seem to be better quality as well!
Recommended Products