Your cart is empty.
Your cart is empty.Product Description
Grasp the center winding rod with your fingers and rotate it in the direction indicated by the arrow on the handwheel to eject it. Then, rotate the winding rod in the opposite direction as shown by the arrow to fix it.
Place the empty shuttle core on the winding rod, place the coil on the pole at the top of the machine, pull out the wire from the coil and wrap it around the empty shuttle core for a few turns, then activate the switch to start winding.
(Attention: When winding, it is prohibited to wear wires on the take-up rod and needle.)
The above steps must be strictly followed and should not be missed or worn out of sequence. The third step of threading is to make sure to thread the wire through the two iron plates of the wire clamp, otherwise the wire will not be threaded and should not be too loose. Clockwise rotation is tight, counterclockwise rotation is loose. Step 8 of threading:When the thread passes through the pinhole, it should be threaded from left to right. (i.e. from outside to inside)
Warm Tips:
1.Before using please read the manual carefully,then follow it to operate.
2.Before starting to stitch, please always check the threading is proper(improper threading will result in damage to machine), and turn the hand wheels 3 times in a counter-clockwise direction to check the machine is working smoothly or not.
3.The ON-OFF switch on the machine should be in the “OFF” position when using the foot pedal. Batteries and power adapter can’t be used at the same time.Otherwise it will damage the machine.
4.When winding the bobbin, it is recommended to use a finger to support the thread.
5. The sewing machines have QC checked before leaving factory, so it is threaded and with a testing stitched fabric,but it is brand new.
JOHN POWELL
2025-07-28 10:12:13
worked great for i needed more powerful than in was expecting
Jalinn
2025-06-14 14:57:33
Not functional
S.Horton
2025-04-22 16:25:36
You get what you pay for. It’s hard to use and won’t work plugged in at all.
Recommended Products