Product Description

Product description

Car Application:

1997 for Acura CL 2.2L 2156CC l4 GAS SOHC Naturally Aspirated (Air Conditioning and Alternator)
98-99 for Acura CL 2.3L 2254CC l4 GAS SOHC Naturally Aspirated (Alternator and Compressor)
11-12 for BMW M3 4.0L 3999CC 244Cu. In. V8 GAS DOHC Naturally Aspirated (Compressor)
08-13 for BMW M3 4.0L 3999CC V8 GAS DOHC Naturally Aspirated (Compressor)
1986 for Ford Aerostar 3.0L 2986CC 182Cu. In. V6 GAS OHV Naturally Aspirated (Fan and Alternator; w/o Air Conditioning)
85-87 for Ford Escort 2.0L 1989CC 122Cu. In. l4 DIESEL SOHC Naturally Aspirated (Air Conditioning; Manual steering; w/ Dealer Installed AC)
91,93 for Ford Mustang 2.3L 140Cu. In. l4 GAS SOHC Naturally Aspirated (Water Pump To Air Conditioning; w/ Factory Installed AC)
92-94 for Ford Ranger 2.3L 140Cu. In. l4 GAS SOHC Naturally Aspirated (Accessory Drive; Manual steering; w/o Air Conditioning)
1986 for Ford Tempo 2.0L 1989CC 122Cu. In. l4 DIESEL SOHC Naturally Aspirated (Air Conditioning; Manual steering; w/ Dealer Installed AC)
86-87 for Ford Tempo 2.3L 140Cu. In. l4 GAS OHV Naturally Aspirated (Air Conditioning; Power steering; w/ Dealer Installed AC)
1982 for Ford Thunderbird 4.2L 255Cu. In. V8 GAS OHV Naturally Aspirated (Alternator and Air Pump)
83-85 for Ford Thunderbird 5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated (Alternator and Air Pump)
98-02 for Honda Accord 2.3L 2254CC l4 GAS SOHC Naturally Aspirated (Compressor and Alternator)
00-01 for Infiniti I30 3.0L 2988CC 182Cu. In. V6 GAS DOHC Naturally Aspirated (Alternator and Compressor)

82-83 for Lincoln Continental 5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated (Alternator and Air Pump)
1994 for Mazda B2300 2.3L 140Cu. In. l4 GAS SOHC Naturally Aspirated (Accessory Drive; Manual steering; w/o Air Conditioning)
84-85 for Mercury Cougar 5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated (Alternator and Air Pump)
1983 for Mercury Cougar 5.0L 302Cu. In. V8 GAS OHV Naturally Aspirated (Alternator and Power Steering)
1987 for Mercury Lynx 1.9L 116Cu. In. l4 GAS SOHC Naturally Aspirated (Air Conditioning; Manual steering)
85-87 for Mercury Lynx 2.0L 1989CC 122Cu. In. l4 DIESEL SOHC Naturally Aspirated (Air Conditioning; Manual steering; w/ Dealer Installed AC)
85-86 for Mercury Topaz 2.0L 1989CC 122Cu. In. l4 DIESEL SOHC Naturally Aspirated (Air Conditioning; Manual steering; w/ Dealer Installed AC)
86-87 for Mercury Topaz 2.3L 140Cu. In. l4 GAS OHV Naturally Aspirated (Power Steering; w/ Dealer Installed AC)
00-03 for Nissan Sentra 1.8L 1769CC l4 GAS DOHC Naturally Aspirated (Alternator and Compressor; w/ Air Conditioning)
2003 for Nissan Sentra 1.8L 1769CC l4 GAS DOHC Naturally Aspirated (Alternator and Compressor; w/ Air Conditioning; To 04/03)
00-01 for Nissan Maxima 3.0L 2988CC 182Cu. In. V6 GAS DOHC Naturally Aspirated (Alternator and Compressor)
2019 for Volkswagen Beetle 2.0L 1984CC 121Cu. In. l4 GAS DOHC Turbocharged
2019 for Volkswagen Passat 2.0L 1984CC 121Cu. In. l4 GAS DOHC Turbocharged

Measure Serpentine Belt Length Method 1: Using an Existing Belt

Mark a line across the belt with a white marker

Line up a measuring tape with the line on the belt

Wrap the measuring tape around the belt until it meets the mark

Hold your finger where the tape meets the mark and note the distance

Measure Serpentine Belt Length Method 2: Finding the Size Using the Pulleys

Use string if the belt is on the pulley or if there is no belt

Hold 1 end of the string on top of the belt or 1 of the pulleys

Wrap the string around the pulleys until it meets the other end

Mark the string where it meets the other end and remove it. Then lay the string flat and measure the distance between the end and the mark

How to Replace a Serpentine Belt

Pull the hood release inside the cabin of the vehicle. To access the serpentine belt, you will need to open the hood of the vehicle

Disconnect the battery. You should always disconnect your battery before starting an automotive project

Locate the serpentine belt. Depending on the engine in your vehicle, the serpentine belt may be located at the front of the engine bay, or it may be along one side. There may be engine covers in the way, so be prepared to remove them if need be

Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run:

Look in the owner's or service manual for your specific year, make and model vehicle for a diagram

You can also take a picture of the existing belt with your cell phone to use as a guide when installing the new one

Use a wrench to relieve the auto tensioner, loosen the bolts in the alternator bracket. As you loosen the bolts, the tension on the belt will likely move the alternator toward the engine and relieve the pressure

Then pull the belt off of the pulleys. With the tension relieved from the belt, pull it off of the pulley that has been placing tension on it, then remove it from the around the rest of the pulleys on the engine

If the belt is severely damaged, be sure to remove any parts that may have come off of it as well

Compare the new belt to the old one and make sure it is right one. Look at the new belt in comparison to the old one to be sure they are the same width and have the same number of ribs going across the belt horizontally

Route the belt through the pulleys. Run the new belt through the pulleys in exactly the same way the old one was. Refer to the belt diagram in your vehicle's owner's manual or the picture you took of the belt before removing it to guide you

Then apply pressure on the auto tensioner and put the belt over it.

Larry H. Morton

August 20, 2025

Just installed and ran for about 30 minutes. Works as it is supposed to.

Ron Key

July 18, 2025

Good item, good price, AAA seller, ðŸ’¯ðŸ‘

jimmy

June 30, 2025

fit like a top works great

June 13, 2025

This belt was the exact fit for our dodge caliber and is noticeably a bit thicker than what we replaced. Now it's just a matter of mileage and durability to see if I can get back here to upgrade to a 5-star. As of to date; so far, so good.

Kindle Customer

June 4, 2025

It was the correct part and went on right way.

May 24, 2025

Fits and works properly. What more do you want from a serpentine belt?

Dave L SMITH

April 22, 2025

Bought this for a 1994 Ford Ranger XLT 4.0L with a/c. Website said it was the correct one. Old belt was in pieces so no way to measure. The belt is supposed to be 2210mm/87" I can get it on all the pulleys but it is too short to fit upon the tensioner pulley. When I look up the correct belt it shows 2250mm

Chupy

April 17, 2025

Good fit fast delivery

Garry S

March 5, 2025

Lowest price in North AmericaEven Beat rock autoDoing what belts do,workin hard

Christian

February 3, 2025

Dodge journey 2010

Shopping Cart

Your cart is empty.

MOCA 6PK1105 EPDM Serpentine Belt Fits for 08-13 for BMW M3 4.0L & 98-02 Accord 2.3L & 00-01 for Infiniti I30 3.0L & 00-01 for Nissan Maxima 3.0L

1.Size:6pk1105

About this item

Product Description

Product description

Measure Serpentine Belt Length Method 1: Using an Existing Belt

Measure Serpentine Belt Length Method 2: Finding the Size Using the Pulleys

How to Replace a Serpentine Belt