Your cart is empty.
Your cart is empty.Product Description
Jeremy F.
2025-09-03 14:56:21
Great product. Don’t listen to reviews saying it won’t stick they installed it wrong. First go and buy you some good 100% Silicone for bath projects don’t use the one it come with it will mold and yellow super cheap. Second stick it down with the double sided tape glue it come with first and form it to the tub. Third get your caulking gun and silicone you bought and run a bead around it and pull the bead with your finger then wait for it to dry. It’s not coming up unless you force it up. And it will not leak. Don’t worry if you try to test fit it before you stick it you can push it and form it to your bathtub walls. I had about an inch and a half gap on the back part and once the bottom was stuck, I was able to push it back against the wall. It’s very flexible. Very good to keep the water in.
McKenna
2025-08-04 12:04:09
I used these in our camp trailer where the water ran down the surround and onto the floor! These were super easy to install which I used the stuff it came with then caulked around the edge with lexel. Looks good, the size is perfect to catch more water than the super short ones. Quality is good durable and flexible.
A&M Dell
2025-07-04 15:57:45
If you’ve got kids who take showers (or even if you don’t), you know the struggle. The water’s supposed to stay in the tub, but somehow, it ends up everywhere else—on the floor, the walls, and yes, even leaking into the basement. After years of dealing with this chaos, I finally caved and tried the Silicone Shower Splash Guard, and let me tell you—it’s been a life-saver.What I Love:Easy Installation with Clear Caulk & Double-Sided Tape: The splash guard comes with clear silicone caulk and double-sided tape for installation. The tape really sticks—once you lay it down, there’s no moving it around. It’s stuck for good. So, make sure you get the placement right the first time! The caulk creates a waterproof seal that holds up perfectly, so no leaks have slipped through since installation.Stops the Leaks: After dealing with water constantly leaking out (thanks, kids!), this guard finally kept the water where it belongs. My kids take showers all the time and somehow do not fully close the curtain, so the floor would end up soaked. Now? No more soggy floors, no more leaking into the basement. It does exactly what it promises.Durable and Discreet: I was concerned that the guard might look bulky or out of place, but it actually blends in quite nicely. It’s low-profile, and the silicone material has held up perfectly after several months of use. No signs of wear, and it’s still going strong.The Only Downsides:Tile Surface Matters: My only small issue was that my tiles are a bit textured, not perfectly smooth. So, when I applied the guard, there was a tiny gap in one spot. No biggie though—it was a quick fix! I just gently pressed the guard into place for a minute or two, and that sealed it up perfectly. Problem solved!Additional notes:Perfect for Tubs with Little Kids: If you’ve got little ones who don’t fully understand the concept of closing the shower curtain, this guard will save you from constant mopping. It’s a simple fix to a problem I’ve been ignoring for way too long. I seriously wish I’d gotten this Silicone Shower Splash Guard years ago. It’s been a total game-changer in keeping the water inside the tub where it belongs. If you have kids who take showers and you’re tired of cleaning up puddles on the bathroom floor, do yourself a favor and get this. It’s easy to install, discreet, and has saved me from a lot of frustration. And if you’re like me and ignored advice for years, I promise—next time I will listen.
Evan
2025-06-12 10:23:54
I love that the product has two methods for adhesion, peel and stick pads already installed on the sides as well as the clear caulk included to improve water barrier. Took me maybe 3 minutes to install! Would buy again.
Helpful Bill
2025-05-22 14:21:58
Extremely poor adhesive tape installed on the units. It's impossible to remove the tape covering the double-sided silicone to install without damaging the double-sided tape. Needs a tab that you pull to remove before installing and not damaging the double-sided tape.Bought two set, returned one set since the double sided tape was damaged
peggy
2025-03-30 13:57:07
This states to caulk, caulk, then caulk some more. Also the wall must be smooth. No texture. Returns sounds easy. For a homebound person it is not.
WalkinNSunshine
2025-03-25 14:37:10
Easy install, no leaks, and holding well.
Lida
2025-03-21 11:16:54
Item will not sit flush against my shower and tub edge without tones of caulking which would require me to sit and hold it until it dries. Not worth the effort also it has large arrows on it reading the directions to mount molded into the plastic which makes it look horrible
Hanover
2025-01-30 17:54:54
Upon reading instructions to install it doesnt appear ot would be easy to remove in the future. Did not bother installing.
Recommended Products