Your cart is empty.
Your cart is empty.Product Description
Monoblock Hydraulic Directional Control Valve, 2 Spool, 21 GPM, SAE Ports
- SKU: P80G-2A1
- This Monoblock valve is a hydraulic directional control valve. These valves are used to start and stop fluid flow into hydraulic cylinders or hydraulic motors.
Features:
- Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI
- Flow Rating: 21 GPM (80 l/min)
- A & B Work Ports: #10 SAE O-Ring (7/8”-14) Thread
- Inlet Port: #10 SAE O-Ring (7/8”-14) Thread
- Outlet Port: #12 SAE O-Ring (1-1/16”-12) Thread
- N Port: #12 (3/4 – 14) G Thread (British Pipe Thread Parallel)
- 3 – 5/16” Mounting Holes
- Made in Europe
Benefits:
- 2 Spool valve with compact design allows for installations in tight areas
- All spools are standard double acting with spring return to neutral position which are ideal for double acting cylinders
- Used for open center systems (Pump to Tank Flow) - closed center option available
- Anti-drop load checks on each spool
- Precision ground and hard chrome-plated spools assure a long life
- High-tensile strength cast iron monoblock construction
- SAE O-Ring ports ensure solid seal and prevent blockages
- Capable of closed center or Power Beyond (G thread conversion plug required)
- Vertical or horizontal handle mount
- Adjustable Relief Valve Range: 1500 to 3625 PSI
- Used as motor or single-acting spool possible (#10 SAE port plug required)
Why Summit Hydraulics?
USA Distributed
All Summit Hydraulic products are distributed in the United States by our local family owned and operated company.
Superior Quality
We focus on superior quality and are doing our part to provide the solutions to those who build our world and farm our food. We stand behind our products and are proud to offer reliable products at fair prices.
Our Vision
To make hydraulics more accessible and easier so the people building and farming our world can get more done in less time.
Jody F.
2025-01-17 11:28:42
I bought this to replace a old up and down and tilt forward and backward valve on an old Baker forklift. Very little modification had to be done. Plugged off the power port on one valve for the down side of the mask because it is a gravity down. All the fitting from the Baker valve fit except for and all I had to do was pickup a #10 fitting where the Baker was a #12 on the pressure side. All the other fittings where the same size. I had to drill 3 holes to mount the valve and I modified the handles to make them higher and further back so you don't have to reach way out to hold on to them.
Tony S.
2024-12-20 15:49:58
Easy to mount and has been working great for quite a while
Recommended Products
$55.50
$ 26 .99 $26.99