Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Renegade
August 12, 2025
Perfect fit. Seems to be well made. Install was easy. I used a cold chisel to pry open the bushing. It slipped over the sway bar with ease with the aid of some poly grease. A standard socket with swivel joint and ratchet spanner loosens and removes the bolts with ease. I cant understand why some people say you have to use deep sockets for this task. Just make sure both front wheels are on level ground when doing this swap otherwise you will have problems fitting these bushes. Have fun and enjoy the ride after fitting these bushes.
Joseph B.
August 9, 2025
Never ever have problems with Moog products. I feel they are better than original and also better than the competition. I have been using them for decades now because I can depend on them to deliver value for the dollar.
Ruben pacheco
June 28, 2025
They fit perfectly, the noise I detected was nulled, and they are work great.. Moog rules!
Texas KnowHow
June 11, 2025
Pros: Quality material. New in box. Fast shipping. Fits correctly to mydaughter's 2004 Jeep Liberty 3.7L V6 4X4. Good price. Comes with two bushings in the box.Cons: the opening to attach to the swaybar is on the side of the circular opening; the original opened from the flat bottom. The problem? It was somewhat difficult to attach to theSwaybar and mount correctly because of the stiffness of the bushing and the positoning of the opening. It is a tight fit due to the engineering of the screws and clearance so I had to do some finagling with a rubber mallet to position them correctly. Not really too big of a deal. It is doable, yet it took longer than anticipated.And they seem slightly smaller than the ones I removed.Overall, it is a good quality aftermarket product.
Tony Cascio
May 24, 2025
Testing the opening and they are stiff. Did a little trial run as I’m waiting for my breaker bar to come in. A tip : dunk them in really hot water for a little bit before you install them. That will make them much more flexible to open up and fit around the sway bar.Recap on install. 2004 jeep liberty. I finally received my 30" breaker bar. Money well spent for this job. Air Impact with extensions through the front fender openings would not crack the bolts loose. Breaker bar was key. I boiled some water, removed pot from heat and soaked the rubber bushing before installation. It was 35 degrees outside so it was a big help. Installing them around the sway bar went easy even though the slit are in a different location from the originals. Install both bushings on the sway bar first than put on the U clamps and tighten down. Don't install one side at a time and tighten. You will need both sides loose to get the bushings on. Car ramps would have been nice but improvised with some blocks. I had a air jack but did not want to raise the truck and cause extra stress on the sway bar being lifted. I believe it would be easiest in the vehicles original siting position. The Jeep rides like a new car now. No more squishing sounds over speed bumps or large street bumps. I didn't change out the sway bar end links because I wanted to do one thing at a time and hone in on the problem. All good.
Drew
May 10, 2025
Simply the best.
Whitney
May 4, 2025
I recently installed in my 2006 Jeep Liberty Limited. Part fit perfectly. Some reviews said it was hard to get on. I didn't have a problem. It was a little stiff (as it should be since it's new) so I had to wiggle it on. Hardest part was getting the top bolts torqued since I didn't have very much room to work with. No need to jack the vehicle. After I put the new bushings on I took it out for a spin. I went over some hefty speed bumps and dips and the annoying noise went away from the old bushings. I would say the job took about 30min to complete. As of now I recommend the product, also nice to see it's made in the USA.
Joel Martinez
April 5, 2025
great replacement.
Tech267
April 1, 2025
These arrived quickly, and are a perfect fit. I installed then in well under an hour, and they eliminated the sway bar “scrunch†noise immediately.
salvador
March 11, 2025
mejor que los de tienda departamental
Angel Reyes
February 17, 2025
Producto de buena construcción y calidad en los materiales, empaque cerrado y bujes originales, dejaré una reseña después de instalar
B Omeara
February 5, 2025
Love this product. Beets the original
BjBnet
January 31, 2025
Exactly what I expected and reasonably priced Took about a half hour to replace on my 07 Jeep Liberty. I definitely recommend this as a replacement part.
Recommended Products
$17.97
$ 8 .99 $8.99