Shopping Cart

Your cart is empty.

Your cart is empty.

MOOG K201686 Suspension Track Bar Bushing for Dodge Ram 1500

Free shipping on orders over $29.99

$10.62

$ 5 .99 $5.99

In Stock
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features


Install MOOG parts, the brand that professional technicians and NASCAR crew chiefs prefer.


Gabrielle Lima
2025-09-01 14:25:59
Yes they are fairly cheap for what it is but i replace my ome bushing with these and it’s horribleThey give you a big play on your steering and it don’t last at allProlly i put 15k on them and needed to be replacedI don’t advise to go the cheap rout with these aftermarket bushingsI have 2012 ram 2500 4x4
Tini
2025-08-29 18:34:57
I installed these bushings in a 2010 Ram 2500. They failed (dramatically) after around 20k miles. If you have stock tires that put dramatically less stress on the track bar these *might* work. But if you, like 99.9% of Dodge pickup owners, have larger than stock tires, these are utterly inadequate and will vibrate to pieces.
nicasio
2025-08-07 17:53:04
No son adecuadas para ram 2500 año 2007
MD
2025-07-22 17:59:12
These are a great oem replacement. Fixed the wobble I was starting to get in my front end (had mild "death wobble"). I didnt buy on Amazon but at a local parts store. If you are unlucky like me and have a 2007.5 ram, you might have 2 different sized bolts on the track bar. The passenger side is 16mm (21mm hex head) and drivers side is 14mm (19mm hex head) on mine. I think this stopped being the case in early 2008 models. If this is the case, the best option is to buy a new 16mm, grade 10.9 bolt, and drill out the hole on the driver's side mounting bracket (5/8 drill bit works). Otherwise, if the 14mm bolt is reused, there is a lot of play between the bolt and the bushing. As far as I can tell, all the 14mm bushings out there have a smaller outside diameter and won't press into the track bar (too small), so drilling out the hole on the bracket is, unfortunately, the best option. If you have a 2008 or later, you shouldn't have any of these problems... But overall, it's a quality part
Marcel Arbour
2025-01-23 11:51:40
Beautiful job tight OEM fit. I have a 12 ton press you will need one for a proper fit.