Your cart is empty.
Your cart is empty.Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.
linda harrison
2025-08-12 17:45:52
Got them for 2005 dodge ram 3500. Fit great
JD
2025-07-09 12:28:45
This item was installed on after market Jeep TJ track bar (front) and cured the death wobble. It’s hard to diagnose a bad bushing but trust me they are cheap enough to just replace after so many miles. My Jeep has 180k miles.
Jon Browning
2025-06-19 10:53:06
Moog K7252 Front Track Bar Bushing Kit,does not fit a 2005 dodge ram 3500 long bed 4 wheel drive truck
Josh Payne
2025-06-16 17:20:02
Worked great for rough country track bar on a 2001 Cherokee XJ to utilize a 9/16 bolt. Will also work for stock track bar.
Sidney Page
2025-06-14 17:40:10
These are manufactured for Ram 1500 and 2500 manufactured 03/18/2007 and prior. After 03/18/2007 the bushing size is totally different.
Canine
2025-05-17 15:52:07
My 2006 Dodge Ram 2500 Mega Cab (5.7 Hemi), OEM track bar bushings were worn out & dry-rotted.I replaced them with these Moog bushings.Removing the OEM bushings can be a challenge, even with a simple homemade shop press!I pushed out the center bushing, then cut the rubber bushing out.To remove the remaining steel press fit casing, I took a sawzall to the metal casing, and carefully cut through the casing, cutting two 'slots' opposite of each other, to relieve the pressure on them. Then I popped them out with a couple hits from a hammer & screwdriver.I cleaned up the bore. Smeared some anti-seize in the bore and pushed the Moog Bushings into place.Installation was that easy!I fully expect these to hold up & last for the rest of the trucks life.
kyle
2025-05-09 14:37:09
Purchased 2, both were the correct part and fit the trac bar. One had been removed from sealed package though and was not an actual moog brand part. Even though it was in the box. Still for the price saved me money and was able to get the job done
thefuzz74
2025-03-28 15:11:44
Great fit for 2006 2500. Stopped the clunking sound.
Customer
2025-02-15 12:16:27
Perfect fit and easy to install. I used a press but, in a pinch, you could likely just use a vice to press the bushing.
Customer
2024-12-02 18:21:23
Ended up being to loose.Replaced by stock parts.
Recommended Products
$72.96
$ 35 .99 $35.99