Your cart is empty.
Your cart is empty.Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.
Geekinhiemer
August 31, 2025
I used these Moog bushings on a 78 f150 4wd,they fit fine, I used my original washers as they were thicker and still in fine shape. Would buy these again.
Jeremy Kousen
August 30, 2025
This was a perfect fit for the radius arms on my 78 F150. Installation was not easy, but that was not the fault of this product and rather trying to remove 43 year old bolts. These are more durable than the OE rubber, but may make for a slightly rougher ride.
Jess H.
July 22, 2025
These are "Thermo Plastic" bushings. I don't know the exact Delrin hardness rating but they are a bit stiffer than the usual polyurethane offerings. For my purpose on an old Ford truck that sees hard use on mostly rough dirt roads they are perfect. Came with all the correct hardware (reuse the existing nuts). They do not come with any lube.
Lucas Overend
July 14, 2025
Fit well and look to be a good product
The Nik
June 16, 2025
If you own an old Ford truck, chances are you've had to change these bushings before. If that old Ford truck has power steering, you've probably changed these bushings a few times, or at least the driver side bushing more than once. These are a game changer! This job is such a PITA on my old F374, and now I'll never have to do it again. Now if I could just get a steering box that doesn't leak...BTW, Moog was too cheap to throw in a pair of new cotter pins to complete this installation, so be sure you have a couple of the right size on hand before you start. And don't try to re-use your old cotter pins, you cheapskate.
Duke
June 10, 2025
R&R of this product is a little tricky if you don't have a repair shop but with care and caution it can be done safety at home garage. Change both sides out at same time. Lets front axle move forward to R&R bushings, then roll back into position and tighten.
Larry Eckard
December 11, 2024
Worked good
Marcos Cabrales
November 22, 2024
Got what I expected, great deal.
Recommended Products