Your cart is empty.
Your cart is empty. This is a piece of DIY faux leather seat cover, which requires customization----you could cut to size yourself and pin with tacks. If our included tacks are weak, please stick with a staple gun.
Color: Black
Material: Faux Leather
Length: 100 cm/39.37 in, Width: 70 cm/27.56 in (Approx. Size)
Application: Motorcycle, Scooter, Electric Vehicle, etc.
Package: 1 x Leather + 1 box Thumbtack
Advantage:
1.High-quality leather makes the motorcycle seat cover more flexible and much softer.
2.Without wrinkles after installation and a period of time, the leather cover is 100% completely consistent with the seat, as good as the original one.
3.Waterproof, Anti-oxygen, Excellent Wear Resistant, Super Elastic, Soft, etc.
4.Fine skin texture on the seat cover looks fashionable.
Installation:
Install with a staple gun, tacks or self-tapping screws to set firmly. (Pull and set at the same time)
Remark:
1.Leather will have wrinkles due to folding. After installation and a period of time, the crease will disappear.
2.A row of little holes processed by the sewing machine on the long side of motorcycle leather seat cover, which do not look obvious and will not appear outside, not affect usage as well after installation.
3.Leather may have a little taste, but will disappear after a period of use, please understand.
Warranty:
MOTOBA offers excellent after-services. Any problem with our products, please feel free to contact us. Corresponding solutions will be provided for you.
Dakota
2025-07-18 18:51:56
I used this seat cover to replace my old one on my atv. It’s good quality and looks great. I will say that if you are planning on using the tacks that it comes with it, you more than likely won’t be able to. I had to get a staple gun in order to get through the back plastic of the seat. Overall, if you’re looking for an affordable, simple, and comfortable seat cover replacement, then this product is for you.
Conner curzio
2025-06-17 19:55:11
Took some time to get it installed, and to stretch it into the right places, but once i was done, i was very happy with it.The thumbtacks are a little difficult to push into the plastic, but i was able to do it. i saw a lot of people were using a staple gun to install theirs, again, I didn't have to use that on mine.Been daily riding my bike for about 2 months with this new seat on it, and its holding up great. my bike sits outside 24/7, rain or shine, in Florida, and the fabric hasn't faded, cracked, or anything.Im actually very surprised by the quality and how simple, and cost friendly this product was, compared to a whole new seat for my bike costing $350+. For $15, I was able to make my seat look brand new!
Kat Irhi
2025-06-13 10:45:29
Fabric is thin and stretchy.Tacks were poor quality but there were plenty leftover.Do yourself a favor and use a heavy duty staple gun too.Easy enough to install, saved my cheap motorcycle seat so well worth the money.Only took an hour or so.
sean c
2025-05-30 13:56:00
Stretched very well
Customer
2025-05-22 17:45:07
The size of the pre cut fabric was perfect and easy to work with. The thumb tacks included were not great quality and I had a difficult time driving them into the hard plastic of the seat. Luckily I had a stable gun handy and I recommend getting one for this project. I also recommend using an adhesive spray to secure the material to the foam of your seat.I only used the thumb tacks as an additional anchor (if I was lucky enough to get one or two to drive through the plastic) after I secured the material with enough staples.Over all I’m very happy with the product and would recommend it to anyone looking to reupholster their seat.
Christopher Torres
2025-04-28 14:38:19
Easy to work with and material is not bad quality. Gunna tighten it more when I get a staple gun. I Just used the tacs it came with.
Motorhed
2025-03-22 18:36:43
It was for my neighbors seat,he typically does kinda sloppy work but either it's easy to use or he had help because it looks pretty decent,he parks outside so we'll see how that works out and if it fails I'll update the review.If you're looking for something to last a long time and have a nice bike that only gets the best quality goodies then I personally would spend the extra money on something higher end,it's a motorcycle seat not a sofa so even the best material won't be much.
Cesar
2025-03-14 16:06:38
Works great
Max
2025-02-27 17:27:31
After reading a couple reviews I was skeptical but took a chance and glad I did it stretches nice and looks good. I used the tacks that came with it and while it is possible (I had to use plyers to drive them in) to use, a stapler would save you time and trouble. Worth it for the price
Keith
2025-02-25 17:06:54
Use a nose Air stapler on perimeter final staples. Very elastic, appears durable.
RJ
2025-02-23 18:40:44
Happy with purchase, material is thinner but worked fine and stretched out good. Looks like new. Recommend a staple gun for install
Customer
2025-01-27 14:22:00
Used to replace the triumph tiger rear seat cover. Took about 15 minutes to cut, staple and cut the excess off. It has a bit of a stretch to it which was nice for the corners. Looks great. I put it over the old cover because I’m lazy. Saved myself quite a few bucks and it looks and feels good. I’m relatively sure the crease from the fold while it was in the packaging will go away with some time. Good product.
Tony
2025-01-17 18:26:46
re built foam on motorcycle seat, recovered new foam with this leather, stretch nicely with no creases and was staples to underside of PVC seat panel and is holding as expected, heat doesn't seem to affect it and worked good...looks factory, been on the bike throughout most of this summer.
Recommended Products
