Shopping Cart

Your cart is empty.

Your cart is empty.

MOTOR METER RACING GPS Sensor Signal & Converter Kit for Electrical Speedometer

Free shipping on orders over $29.99

$64.49

$ 31 .99 $31.99

In Stock

About this item

  • FEATURES: Compatible with Most of the Automotive Speedometer. Compatible with MOTOR METER RACING CLASSIC / VD / EVO SERIES Electrical Speedometer.
  • FEATURES: Plug & Play Connectivity. 67 Hz at the Speed 37 MPH / 60 KMH. 1 Hz Refresh Rate. 6000 Pulse per Miles.
  • PRODUCT DETAIL: Waterproof GPS Antenna Harness Length: 2000mm (6.5'). Signal Harness Length: 300mm (1').
  • PACKAGED: GPS Antenna, Converter, Antenna Harness, Signal Harness, Installation Instructions.
  • One Year Limited Warranty For Non-Human Factor Damage & Free Lifetime Technical Support.



Product Description

gps sensor
p&p
spe

W. Free
2025-07-11 12:54:46
You’ll need this for the GPS speedo but is plug and play. System works great
Customer
2025-07-09 15:02:16
I bought this for my son’s go kart so we could have a gps speedometer paired with a trail tech vapor. It’s easier than figuring out how to get a magnetic pickup mounted and it will read the speed no matter what tire size we change to. At first I simply wired it up to the vapor speedometer wires and it didn’t work. I realized the the vapor speedometer works on a simple reed switch closing with the magnet passing, so wired a reed switch relay onto the VSS wire outputs and then into the speedometer wires. Works perfectly now. The wiring instructions were frankly terrible for the unit so I knocked off a star for that. Otherwise a good low priced alternative to the GPS speedometers for motorcycle/ATVs with some tinkering.
jeancarlo
2025-05-04 10:43:23
No funciona con todos los velocímetros como dicen y las instrucciones son escasas… perdí mi dinero
Andy D.
2025-04-09 20:26:20
Great value and does exactly what you need it to do. Highly recommended!
Daniel
2025-03-05 10:34:57
This is a decent adapter if you buy their specific speedo kit. Don't try to use it with anything else tho.
Jimster480
2025-01-07 12:00:56
We installed this in one of our race cars that doesn't have a working speedo (the speedo was originally a cable based speedo and we no longer have a transmission that supports cable speedos) and it works fine. As long as you have a compatible gauge; the installation takes 5 minutes or less. Basically you plug it in and run the wire, mount the little box and you are done.Not much else to say here; it works as intended to give you a speedo in a car that doesn't have a compatible output method or gauge for your swap kit.If this review helped you at all; please mark it helpful! Thanks!
chuck
2024-12-22 14:15:37
Easy to to use
Recommended Products

$49.89

$ 26 .99 $26.99

4.4
Select Option

$1,001.27

$ 99 .00 $99.00

5.0
Select Option