Your cart is empty.
Your cart is empty.Locking wrench type pulley holder holds clutch hubs, flywheels, gears, pulleys and sprockets during maintenance. Made from medium carbon steel with hardened jaws with a maximum width of 5 inches. spanner wrench tool Features 8mm spanner pins, recommended for square tooth style clutch hubs.
Christina Hankins
2025-08-24 18:40:33
Works good
david schoenoff
2025-08-16 14:30:07
well built , fairly easy to use , made the job , easy . I had a clutch baset nut , that had the washer behind it folded so tight against the nut , that I couldn'tget any thing in between to unfold that washer , I carefuly with the smallest cutting wheel I had used a Dremelto grind down the fold , and this tool let met hold the clutch basket and drum , and I used a corded impact gun, to get it off , worked great , just did a quick " berp" [ quick press and release of the impact gun trigger and it was off. I will buy from this seller again
Amy
2025-08-09 12:01:34
Great tool doubles for clutch basket and has the pegs to hold magneto flywheel. Solid as any other tool I got, great purchase at awesome price.
Dan Simpkins
2025-07-27 19:09:46
Worked like a charm. Best way to immobilize flywheel
Scott W Iovene
2025-07-10 15:55:08
This tool worled as expected at am afforable price. Held 60 ft lb on my 250f clutch and left no marks in splines.
ddavidv
2025-06-19 12:40:48
As others have noted, the 'teeth' that hold the clutch basket are too thick for most applications. I had to grind them down to fit the basket on my Tiger 800. After doing so, it worked just fine. You only need to make it tight enough to stay in the slots of the basket. If you have to squeeze the handles together with any force you're using the tool wrong. This also worked on my old Royal Enfields.
Jacob Tepper
2025-06-13 11:07:53
well made, easy to use, fit perfectly on my 1974 Yamaha rd350. Would certainly recommend/buy again
josh
2025-06-08 17:01:37
Did not fit my 2003 yz125 clutch boss grooves so I had to grind down the edges for it to fit. Other than that it did the job after I had to modify it.
shane
2025-05-30 14:58:02
haven't used yet but they seem decent enough to do the job
Christina Hankins
2025-05-19 12:55:45
Works good
david schoenoff
2025-04-27 09:08:22
well built , fairly easy to use , made the job , easy . I had a clutch baset nut , that had the washer behind it folded so tight against the nut , that I couldn'tget any thing in between to unfold that washer , I carefuly with the smallest cutting wheel I had used a Dremelto grind down the fold , and this tool let met hold the clutch basket and drum , and I used a corded impact gun, to get it off , worked great , just did a quick " berp" [ quick press and release of the impact gun trigger and it was off. I will buy from this seller again
Amy
2025-04-22 17:53:49
Great tool doubles for clutch basket and has the pegs to hold magneto flywheel. Solid as any other tool I got, great purchase at awesome price.
Dan Simpkins
2025-04-14 18:20:40
Worked like a charm. Best way to immobilize flywheel
Scott W Iovene
2025-04-03 17:47:55
This tool worled as expected at am afforable price. Held 60 ft lb on my 250f clutch and left no marks in splines.
ddavidv
2025-03-06 15:33:16
As others have noted, the 'teeth' that hold the clutch basket are too thick for most applications. I had to grind them down to fit the basket on my Tiger 800. After doing so, it worked just fine. You only need to make it tight enough to stay in the slots of the basket. If you have to squeeze the handles together with any force you're using the tool wrong. This also worked on my old Royal Enfields.
Jacob Tepper
2025-02-08 14:29:30
well made, easy to use, fit perfectly on my 1974 Yamaha rd350. Would certainly recommend/buy again
josh
2025-02-07 15:47:02
Did not fit my 2003 yz125 clutch boss grooves so I had to grind down the edges for it to fit. Other than that it did the job after I had to modify it.
shane
2025-01-25 18:44:08
haven't used yet but they seem decent enough to do the job
Recommended Products
