Your cart is empty.
Your cart is empty.Product Description
MUSETEX 270° FULL VIEW TEMPERED GLASS DESIGN
Unlike other case designs,MUSETEX breaks barrier between two pieces of glass,achieve a 270° panoramic view,like a fish tank,to showcase the high-end PC hardware and cool lighting effects inside case.
-
-
Free to Customize Light Color You Wish
*Fans support multiple lighting software
*Enable motherboard control,sync of multiple ARGB fans
*Allow to sync lighting with other PC accessories connected to MOBO for unlimited design of gaming space
-
Cool Colorful ARGB Fans Connection Needs Attention
Case fans support motherboards with new type 5V3PIN RGB interface.
If not have that,don't worry.
1. Only have 12V4PIN interface can buy a RGB converter.
2. No RGB interface can cont@ct us for advices.
-
Quick Remove Snap-on Panels
MUSETEX invested high cost to bring the new quick release panel design.
Snap-on removal and installation allows for easy opening of both sides, simplifying steps to enjoy PC construction.
-
Adapt to New Innovative MOBO Installation Needs
The case caters to needs of the trend,reasonable openings to adapt to new back-plug motherboard installation. The front of the case is clean and simple while optimizing the easy connection of cables.
-
Beautifully Cooling Reverse Blade Inlet Fans
Compared other fans that can only be mounted in reverse,MUSETEX has prepared 2 reverse-blade fans to be mounted on side,introducing external airflow into case without affecting its overall aesthetics.
-
Thoughtfully Designed High Quality Dust Filters
*Dust filter mesh magnetic sticker design prevents it from falling off easily and has a long service life.
*Maintains normal ventilation and reduces dust accumulation inside the case.
-
ATX Tower Case Powerful Space Layout
- Mainstream PC parts fully supported
- Simple, generous exterior design, scientifical internal structure design
- Constructed of strong,high-density white metal material.
-
Partitioned layout, independent heat dissipation
- Power supply, hard disk partition layout, large capacity support
- Back panel cooling holes, no interference with airflow in and out.
- Ultra-wide cable management space for easy wiring.
-
Powerful Cooling Capacity Support
- Supports multiple sizes of cooling fans and liquid radiators
- Case provides fan brackets for fans with wider cutouts, allowing for customized fan placement and flexibility.
-
Y6 ATX case includes
- Y6 Case*1, PWM ARGB Fan*6 (2 on the side, 3 on the top, 1 on the back), Manual*1, Screw Accessories*1
- ( Not include motherboard, graphic card, power supply, radiator )
-
The Secret of Unified and Cool PC Build
The Y6 PC case pre-install 5 PWM ARGB fans,high-level coolness.But if you want to install more fans of same model to achieve more uniformity,you can click button to purchase additional fans from us.
-
Thoughtful Customer Support
- If you have any questions, please feel free to cont@ct us, MUSETEX is committed to providing excellent customer support.
Joshua Vargovich
2025-08-27 10:36:15
The build quality is really great for the price, the fit and noise level also perfect. The cable management is all in the rear and hidden so that was nice. One of the fans was backwards but that was just a quick flip which made functionality nice with the pre installed fans. And the installation of everything was overall very easy for someone who doesn't really build computers.
perry
2025-08-16 12:55:32
With the right fan setup, the airflow is pretty dang good. The case came with 5x Musetek argb fans but I only ended up using 3x and then adding 6x Thermalright argb fans. Temps rarely ever go over 60c for cpu and gpu. Although, I’m only using an i5-10400 and an rtx 3060.The case looks spectacular though. I admit there wasn’t much confidence when ordering but after building in it, the quality is high and well put together.The only downside is that when putting a rear fan, the case will vibrate/hum at certain rpm. I’m using a Thermalright TL-C12W-S argb fan and when it’s around 1000rpm, you’ll hear a hum from the case. Any less and any more and there’s no humming. I have this fan in two other builds in the house and they don’t hum at this rpm. I’ve swapped and still get humming. Oh well, not deal breaker as you have to be sensitive of hearing to notice it.
Rain
2025-07-12 10:59:30
This case is fantastic for a micro ATX motherboard. It has quite a lot of open space, plenty of wire pull-throughs, and a ton of fan slots for airflow (9, to be precise). The case comes entirely assembled with fans installed, which was pretty nice considering this was my first build (one less thing to worry about!). The case is made of metal and glass, and the side panel opens up with a small latch on the upper left side- if you’re constantly tinkering with the PC that may not hold up over time, but I’d say normal cleaning shouldn’t be an issue. The dust filters are white to match the case and do have a removable black brand tag on them, if the color bothers you.Overall the case looks good, is very sturdy, was easy to build in and allows for some huge graphics cards. What else could you realistically want at this price?
James - flywickedYT
2025-06-29 16:08:49
Really liked how compact it was and nice it turned out. Did a vid build on YT. However had issues mounting the 240mm fans on the side of the case since there weren’t screw brackets fit for them had to zip tie them down. Overall good airflow and cooling. Kinda wish they didn’t put the logo name on the front of the case tho.
Zack
2025-06-28 13:31:05
The media could not be loaded.
Aria
2025-04-29 16:17:24
The media could not be loaded.
Trell
2025-04-27 17:03:15
The media could not be loaded.
Izaiah
2025-04-25 12:28:31
Good case. Was smaller than I thought but still really nice
Sarah Burgess
2025-04-12 12:58:17
The media could not be loaded.
Chandler
2025-04-11 16:14:07
The case came with everything I needed. Very wicked looking case, only thing I wish it had was more places to hide the cables to make it more clean looking.
Steve
2025-03-01 12:21:21
NOTE: This review was modified as a result of Musetek taking case of my issues I did not like.After everything is said and done the case seems to be pretty decent.There was a couple of mobo studs that were no good and the color of cables on the fans didn't match the case however Musetek is sorting that out for me.Overall case looks good, she's got girth to her but I like lots of airflow.Filters should be easy to clean as they are easy to removeThere are no screws to remove the covers just pull on the tabs and the magnets will release and I think that's a great design because it will always hold and snap tight.This case gives you a real opportunity to showcase your wire management skills because everything is out in the open and honest I prefer this because it shows you the cleanliness of the case.It's a solid budget case if you want a tempered glass case and don't worry about the gap in the front glass, there is no case that doesn't have this and many other gaps. I did an airflow test and the flow is very positive on this case travelling from front to top and back cleanly.If you are planning an all white look, make sure to buy white fans with white cables, the fans have black cables that come with it and if you are all about it being just right that's the one thing you will want to replace.Oh the cabling in the case other than the fans is good, no issues there and there are lots of tabs to utilize zip ties in the back of the case to do good cable management as well.
Justin Gibson
2025-02-12 10:18:29
Rgb fans work, case is easy to build in and looks the part, thanks :)
GoodKnight
2025-01-30 15:57:57
Not as expensive as many with its ballance of features.
Recommended Products